Kouki_monstr
11-23-2010, 05:34 PM
Hey guys, I recently bought another motor and pulled my KA out of my 97 s14. Motor has exacly 159,203 miles on it and it ran great! Motor has never overheated, or gave me any problems whatsoever. Motor comes with everything INCLUDING A/C! Tranny shifted with no grinding, oil was changed every 2k miles with synthetic blend. Never driven hard (whats the point?) for as long as i owned it (a year and a half).
Not included
Fan shroud
fan blades
wire harness
The bad
-Motor had an exhaust leak. Found out previously before i owned it that the exhaust stud snapped into the head. I attempted to drill it out and yea, went a lil to far and drilled into the coolant jacket. THIS IS NOT BAD. you can easily fix this with a weld and rethreading. I just decieded that i wanted to do my motor now and pulled it out as is.
-Clutch still works fine for normal driving, but since its out i would throw a new one in.
Comes With
complete motor
head
block
5 speed tranny
ECU
tranny mounts
motor mounts
stock intake with filter at the end
header
the first cat located after the header
shifter
radiator
Injectors
A/C items! (Worked great when i would use it)
A/C ALT & Powersteering belts (would replace)
PRETTY MUCH EVERYTHING!
I pride myself as being a legit seller and try to tell you every little thing about my items im selling, so ask away if you have any questions. I am looking to get $600 OBO I am NOT looking to part as of now and LOCAL ONLY. Thanks in advance
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether006.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether005.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether007.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether008.jpg
The first stud is where the hole is. Best pic i could get for now since the motor is along the wall.
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether010.jpg
A/C stuff
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether011.jpg
Not included
Fan shroud
fan blades
wire harness
The bad
-Motor had an exhaust leak. Found out previously before i owned it that the exhaust stud snapped into the head. I attempted to drill it out and yea, went a lil to far and drilled into the coolant jacket. THIS IS NOT BAD. you can easily fix this with a weld and rethreading. I just decieded that i wanted to do my motor now and pulled it out as is.
-Clutch still works fine for normal driving, but since its out i would throw a new one in.
Comes With
complete motor
head
block
5 speed tranny
ECU
tranny mounts
motor mounts
stock intake with filter at the end
header
the first cat located after the header
shifter
radiator
Injectors
A/C items! (Worked great when i would use it)
A/C ALT & Powersteering belts (would replace)
PRETTY MUCH EVERYTHING!
I pride myself as being a legit seller and try to tell you every little thing about my items im selling, so ask away if you have any questions. I am looking to get $600 OBO I am NOT looking to part as of now and LOCAL ONLY. Thanks in advance
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether006.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether005.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether007.jpg
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether008.jpg
The first stud is where the hole is. Best pic i could get for now since the motor is along the wall.
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether010.jpg
A/C stuff
http://i5.photobucket.com/albums/y200/ps13drifter44/GetTogether011.jpg