JPsNissans
11-19-2010, 05:17 PM
SOLD SOLD SOLD SOLD! For Sale: 1995 Nissan 240SX - S14 Shell - RB25 Swap Ready! - Clean title in hand - $1700 OBO - SOLD SOLD SOLD SOLD!
For sale is a 1995 240SX shell. There is no engine or transmission included. There is an R33 Skyline GTS-T Engine Crossmember (for an RB25DET) currently installed in the car, I have the original KA crossmember also in case you are interested in putting an SR or KA in there instead of an RB.
Located in East-Central Florida.
This car is a fantastic swap candidate. I bought this car as a shell from the previous owner who was in the process of swapping in another KA and changing the car from an automatic to a manual. I probably paid a little too much for it back then when the economy was a bit better and 240SX's were very hot, but this car was exactly what I was looking for in an RB25DET swap car. The car is straight in all the places you care about, and completely rust free.
The interior is absolutely mint for a car this age, the seats have a little wear/stain going on, but overall they are nice. I bet a steam cleaning or some elbow grease would make the seats nearly good as new. The dash / gauge cluster / door panels are great. You get the idea, the interior is really a strong point of this car.
The quarterpanels, fenders and doors are straight. Obviously, the faded maroon paint kind of sucks, but I'm the kind of guy who doesn't care about paint until I have everything else perfect. The paint is coming off of the bumpers, but the bumpers themselves are in good shape. The trunk is tweaked a little and needs some adjustment, and the hood has a dent in it, as you can see in the pictures. I was just going to strip the paint off an do a black vinyl wrap on the whole car until it was paint time.
The engine bay and some of the trans tunnel has been fully prepped and then sprayed with black truck bed liner. It's one of my favorite things about the car.
The car also has been "converted" to a manual, clutch pedal and master cylinder have been installed.
These wheels are not on the car anymore and are back on another car, the car currently has steelies on it.
Any questions, offers, anything, shoot me an Email at - [email protected] -
http://img828.imageshack.us/img828/5646/minisnv16611.jpg
http://img822.imageshack.us/img822/1259/minisnv16612.jpg
http://img838.imageshack.us/img838/7823/minisnv16616.jpg
http://img178.imageshack.us/img178/8600/minisnv16617.jpg
Engine bay done in truck bedliner -
http://img405.imageshack.us/img405/1502/minisnv16627.jpg
http://img824.imageshack.us/img824/4310/minisnv16629.jpg
http://img690.imageshack.us/img690/360/minisnv16632.jpg
http://img835.imageshack.us/img835/7350/minisnv16634.jpg
http://img839.imageshack.us/img839/4229/minisnv16635.jpg
http://img704.imageshack.us/img704/1977/minisnv16631.jpg
http://img248.imageshack.us/img248/3476/minisnv16636.jpg
Here is the full wiring harness, I believe the KA ECU is also there-
http://img163.imageshack.us/img163/2433/minisnv16640.jpg
Any questions, offers, anything, shoot me an Email at - [email protected] - $1700 OBO - SOLD SOLD SOLD SOLD!
I also have an RB25DET with Greddy intake plenum, PE timing belt and new tensioner/idler, N1 race pump and more for sale; also a Syko RB25DET mounting kit and DriveShaftShop driveshaft for the swap to fit this particular car. A whole setup with the best parts for an RB25DET powered S14!
Thanks for your time,
- JP
For sale is a 1995 240SX shell. There is no engine or transmission included. There is an R33 Skyline GTS-T Engine Crossmember (for an RB25DET) currently installed in the car, I have the original KA crossmember also in case you are interested in putting an SR or KA in there instead of an RB.
Located in East-Central Florida.
This car is a fantastic swap candidate. I bought this car as a shell from the previous owner who was in the process of swapping in another KA and changing the car from an automatic to a manual. I probably paid a little too much for it back then when the economy was a bit better and 240SX's were very hot, but this car was exactly what I was looking for in an RB25DET swap car. The car is straight in all the places you care about, and completely rust free.
The interior is absolutely mint for a car this age, the seats have a little wear/stain going on, but overall they are nice. I bet a steam cleaning or some elbow grease would make the seats nearly good as new. The dash / gauge cluster / door panels are great. You get the idea, the interior is really a strong point of this car.
The quarterpanels, fenders and doors are straight. Obviously, the faded maroon paint kind of sucks, but I'm the kind of guy who doesn't care about paint until I have everything else perfect. The paint is coming off of the bumpers, but the bumpers themselves are in good shape. The trunk is tweaked a little and needs some adjustment, and the hood has a dent in it, as you can see in the pictures. I was just going to strip the paint off an do a black vinyl wrap on the whole car until it was paint time.
The engine bay and some of the trans tunnel has been fully prepped and then sprayed with black truck bed liner. It's one of my favorite things about the car.
The car also has been "converted" to a manual, clutch pedal and master cylinder have been installed.
These wheels are not on the car anymore and are back on another car, the car currently has steelies on it.
Any questions, offers, anything, shoot me an Email at - [email protected] -
http://img828.imageshack.us/img828/5646/minisnv16611.jpg
http://img822.imageshack.us/img822/1259/minisnv16612.jpg
http://img838.imageshack.us/img838/7823/minisnv16616.jpg
http://img178.imageshack.us/img178/8600/minisnv16617.jpg
Engine bay done in truck bedliner -
http://img405.imageshack.us/img405/1502/minisnv16627.jpg
http://img824.imageshack.us/img824/4310/minisnv16629.jpg
http://img690.imageshack.us/img690/360/minisnv16632.jpg
http://img835.imageshack.us/img835/7350/minisnv16634.jpg
http://img839.imageshack.us/img839/4229/minisnv16635.jpg
http://img704.imageshack.us/img704/1977/minisnv16631.jpg
http://img248.imageshack.us/img248/3476/minisnv16636.jpg
Here is the full wiring harness, I believe the KA ECU is also there-
http://img163.imageshack.us/img163/2433/minisnv16640.jpg
Any questions, offers, anything, shoot me an Email at - [email protected] - $1700 OBO - SOLD SOLD SOLD SOLD!
I also have an RB25DET with Greddy intake plenum, PE timing belt and new tensioner/idler, N1 race pump and more for sale; also a Syko RB25DET mounting kit and DriveShaftShop driveshaft for the swap to fit this particular car. A whole setup with the best parts for an RB25DET powered S14!
Thanks for your time,
- JP