Built RB30DETT w/ RB26 Head, almost full swap

[pirate87]

*Price is flexible. Make offers. I am moving soon, setup has to go!*

For sale is my RB30DETT project. I originally intended to swap the setup into my R32, but long story short, the project (car) went up in flames....literally. The motor is about 80% assembled as it sits. I have a lot of parts that were going towards the swap, which will be needed to put the motor in any chassis, Skylines included. I will not part the setup out. My email is ttupchu[email protected] if you have any questions.

What's included:

Series II RB30 bottom end (I hand selected this from a group of 6 blocks a friend shipped from Australia).
RB26 Head (Stock, excellent condition)
Wiseco Forged 86.5 mm Pistons
Spool RB30 Forged Rods
Machined Crank with extended oil pump drive collar
ACL Race Main & Rod bearings
ARP 2000 Rod Bolts
NISMO 1.2mm head gasket
ARP head bolts
Rear head oil drain
1600 CC Bosch Fuel Injectors
NISMO Full rebuild gasket kit
Complete Intake manifold
Stock RB26 Turbo Manifolds
Complete set of twin turbo hot pipes
R32 RB26 Engine Wiring Harness
Stock RB26 Coil packs
RB25 Transmission Bellhousing (to mate with Z32 Tranny)
RB25 RWD Driveshaft

I have the original stock RB26 twin turbos, however they are both seized. I was, obviously, going to upgrade, but never did. I can include the turbos if wanted.

What's NOT Included

RB26 Cams
RB30/26 Timing belt
Fuel Rail to fit 1600cc injectors

Otherwise, the engine really is almost 100% complete. The parts are there, just not necessarily assembled. I am perfectly willing to ship the setup- shipping for similar items has been about $300-400.

Asking price $4500

http://i159.photobucket.com/albums/t139/ttupchur/DSC02935.jpg

http://i159.photobucket.com/albums/t139/ttupchur/DSC02936.jpg

http://i159.photobucket.com/albums/t139/ttupchur/DSC02937.jpg

http://i159.photobucket.com/albums/t139/ttupchur/DSC00412.jpg

http://i159.photobucket.com/albums/t139/ttupchur/DSC00413.jpg
:woot:

[Sergio180sx]

Daaamn talk about a BEASTLY setup! great price too!!

[confuzed240]

I'm local. Trade for a kidney?

[MillS14]

Gorgeous Motor bro. GLWS

[5ZigenZenki]

damn dood glws!

[pirate87]

I'm local. Trade for a kidney?

Human kidney?

[s14sport]

who put this setup together?

has it been blueprinted?

[DriftReddy]

OMFG!!! BEAST!!!!

Trade u my kidney and 5$ lol

[pirate87]

who put this setup together?

has it been blueprinted?

Machine work was done by HRT Performance in Durham, NC. The engine was assembled by myself, and kept within FSM specifications unless otherwise instructed by the parts manufacturer (ex. the ARP studs).

[holemilk00]

That's a great deal for what all is there man. GLWS, correct me if I'm wrong but just the rods alone are over $1000 after shipping right? I've seen people making 1400whp on those rods.

[pirate87]

That's a great deal for what all is there man. GLWS, correct me if I'm wrong but just the rods alone are over $1000 after shipping right? I've seen people making 1400whp on those rods.

I got a slightly better deal on the rods, but I think its a pretty fair price for what all is there. Thanks for the comments.

[P-Funk alot]

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

[schrapnel85]

gorgeous motor and great price. GLWS

[holemilk00]

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

Start hanging out with these guys, they are getting much more common with the z community.
HybridZ (http://forums.hybridz.org/)

That website also has videos of what a motor set up like this can do if you search well enough.

[pirate87]

man o man nice i have yet to see anyone in person with one completed. may i ask the reason for selling

Had an R32 that I was going to swap this into. Car caught on fire in a freak accident, so I'm giving up on this project. Also moving soon and won't have the garage space.

[pirate87]

Bump for offers.

[tricky_ab]

Hit up the GTR Canada forums and GTR Owners forums as well...

[Imarvin240]

thats bada$$ man...someones going to have a solid motor with this.

GL with the sale

[pirate87]

Still for sale, will consider any reasonable offer.

[redline240sx]

Sick motor man, suck you have to give it up. Good luck on the sale

[4-20sx]

i would love to buy this =( but i dont have that kind of money

[gearhead55]

FUUUUUUUU baller set up.

[alohaworld]

one can only dream...

[emericanz]

if you still got this by mid summer ill buy it straight cash

[ArBy25DeT]

sorry to hear about your project.....that really is a killer setup and will make BIG power easy....throw this thing on ebay...someone will buy it...

[pirate87]

sorry to hear about your project.....that really is a killer setup and will make BIG power easy....throw this thing on ebay...someone will buy it...

Yeah, I normally hate going the ebay route, but I am eager to sell so I posted it up a few nights ago. I'll keep my fingers crossed. Thanks for the compliments.

[hat1324]

Do you still have all those RB30 blocks?

[sonnyg35]

motor still available? pm me please

[brudacille]

i just came

[holemilk00]

Do you still have all those RB30 blocks?
If you can find them so cheap and landed at rbthirty.com like you said in my thread why are you asking about them in this thread?

[pirate87]

Motor still available. Sorry for all the non-replies, been away. Price lowered to $5000.

[nissangtr1]

Parting out? I know you said you won't, but it's been up for a while and a lot of the parts would prob move fast if you did.

[pirate87]

Parting out? I know you said you won't, but it's been up for a while and a lot of the parts would prob move fast if you did.

I still would rather not...but like you said, it has been a while. What piece are you interested in? I won't consider unless there is significant interest in individual pieces. Thanks.

[jk26]

I would be interested in the injectors if you decide to part out Thanks

[nismoninjagtr]

would you be willing to sell the rb25 bellhousing and if so how much?

[nissangtr1]

The complete rb30 block. I can send you my stock rb26 block if you wanna work something out. That way you still have a complete motor to sell.

[Syncade]

Id be interested in the head

[pirate87]

For now guys, I'm not going to part it out. I still want to try and sell the whole lot. I am open to offers, and will definitely let you all know if I do decide to part it out. Thanks for your interest.

[Tantwoforty]

looks like this has been forsale forever... glws its beautiful

[pirate87]

Still do not want to part it out. Unfortunately I just don't have the time to deal with all of the individual sales/shipping.

New Zilvia price: $4500

Thanks, guys.

[nismoninjagtr]

I want this motor soooo bad..... I would have saved for it if I knew it was still gonna be for sale.... Are all the sensors on the motor is anything electrical needed?

[pirate87]

All sensors are included and should be in working order, but being that I have never started the motor, I cannot confirm. They are all included however.

[ChadMcGarity]

PM me what is included. Bottom price. Let me know. Thanks.

[jk26]

Ready to part out yet, been watching this from the beginning I want that short block so bad.

[Imarvin240]

i wish i knew this was still for sale hah i bought a motor a couple months ago because i thought this was gone...well good luck with the sale, that price is so low...hopefully it will soon for you.

[NINE]

What a deal!

[1985HR30SkylineInNC]

I know this thread is old...........Is this for sale still? I am local (currently deployed tho) and I could have my shop/mechanic come and look at this and get it for me...........Let me know ASAP please!!!!!!!!!!!!!!!!!!!!!!!

[TriniGT]

Was a second Tension Pulley tapped and installed as well?

[kaane21]

Pm me if this swap is still available seriously interested...

[lelandlaursen]

still for sale?? pm me please ,,,,all cash up front

[Jogburnsheets]

I'm aware this is highly unlikely, but is this still for sale? Interested.

[drivinsidewayz86]

Still forsale

[s13mikesr20]

Fuck is all I'm saying and bump for untold super sayin power this motor can produce

[Kinda-Important]

im almost ready to go get a small loan from the bank for this.

[ma.jomaa]

Still forsale

Fuck is all I'm saying and bump for untold super sayin power this motor can produce

im almost ready to go get a small loan from the bank for this.


Wow all three of you failed to see how old this thread is :picardfp:

[Kinda-Important]

Wow all three of you failed to see how old this thread is :picardfp:

why would someone reply to something this old in the first place.:bash:

[JBotch79]

Trade for a 2007 yfz 450?

[turbob16ef]

Lock this thread. Owner hasn't logged in sense 2011.