drzchulo147
11-10-2010, 12:29 AM
Up for sale is my brand new Garrett Gt3582R Turbo. This turbo is a ball-bearing, water + oil cooled turbo. I will included for FREE coolant fittings for the turbo and a 10AN drain flange and a 4an feed restrictor. The compressor is a Precision Anti-Surge housing. The turbine is a Tial V-band ($400 VALUE) in and out housing. Here's some advantages of running a Tial turbine.
* Aprox. 33% turbo weight reduction
* Cast stainless steel provides a beautiful smooth finish inside and out
* Full V-Band utilization eliminates the need for bolts and gaskets
* V-Band inlet design allows for pivoting of the turbo to aid clearance issues and tight fits
* Overall turbine housing size is smaller while maintaining greater strength
Turbo Specs-
Compressor:
- Wheel: 82mm w/ 56 trim
- Housing: .70 ar
Turbine
- Wheel: 68mm w/ 84 trim
- Housing A/R: .82
The reason I'm selling this turbo is cause of some things that have come up and have put my project on hold. This turbo is brand new and an authentic Garrett product. I tried to take a detailed picture of the Garrett Serial Plate that is located on the CHRA. The serial to this turbo is 714568-5002. You can call up ATP turbo (510.445.1682) give them the serial and they will confirm that it is indeed a GT3582R. I am strongly against fake parts and would never buy or sell any.
The price is set at 1250 shipped or 1200 picked up. I am located in the Queens, NY area. If you have any questions please email me for a fast response
[email protected]
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0005.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0006.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0007.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0008.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0009.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0010.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0011.jpg
Next up is my brand new Precision 46mm Wastegate.
"These units feature a 46mm valve, and can be used in a wide variety of applications. They can be used in any kit or setup that currently utilizes a v-band style 44mm gate, but will work best with the supplied inlet flange (the inside diameter of our flange is slightly larger than our competitors). The wastegates will be shipped with all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI). All units feature a black, anodized wastegate cap, and a Kevlar reinforced silicone diaphragm. In addition, the unit features a five angle valve job, as well as high temp 17-7 ph springs (more durable and can withstand higher temperatures before changing rate). Lastly, the PW46 is set up for a 1 3/4" pipe on the discharge side, and a 1 7/8" pipe on the inlet. "
Price is set at 280 shipped or 260 picked up
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0014.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0015.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0016.jpg
* Aprox. 33% turbo weight reduction
* Cast stainless steel provides a beautiful smooth finish inside and out
* Full V-Band utilization eliminates the need for bolts and gaskets
* V-Band inlet design allows for pivoting of the turbo to aid clearance issues and tight fits
* Overall turbine housing size is smaller while maintaining greater strength
Turbo Specs-
Compressor:
- Wheel: 82mm w/ 56 trim
- Housing: .70 ar
Turbine
- Wheel: 68mm w/ 84 trim
- Housing A/R: .82
The reason I'm selling this turbo is cause of some things that have come up and have put my project on hold. This turbo is brand new and an authentic Garrett product. I tried to take a detailed picture of the Garrett Serial Plate that is located on the CHRA. The serial to this turbo is 714568-5002. You can call up ATP turbo (510.445.1682) give them the serial and they will confirm that it is indeed a GT3582R. I am strongly against fake parts and would never buy or sell any.
The price is set at 1250 shipped or 1200 picked up. I am located in the Queens, NY area. If you have any questions please email me for a fast response
[email protected]
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0005.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0006.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0007.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0008.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0009.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0010.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0011.jpg
Next up is my brand new Precision 46mm Wastegate.
"These units feature a 46mm valve, and can be used in a wide variety of applications. They can be used in any kit or setup that currently utilizes a v-band style 44mm gate, but will work best with the supplied inlet flange (the inside diameter of our flange is slightly larger than our competitors). The wastegates will be shipped with all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI). All units feature a black, anodized wastegate cap, and a Kevlar reinforced silicone diaphragm. In addition, the unit features a five angle valve job, as well as high temp 17-7 ph springs (more durable and can withstand higher temperatures before changing rate). Lastly, the PW46 is set up for a 1 3/4" pipe on the discharge side, and a 1 7/8" pipe on the inlet. "
Price is set at 280 shipped or 260 picked up
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0014.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0015.jpg
http://i65.photobucket.com/albums/h229/drzchulo147/DSC_0016.jpg