do skyline r32 calipers bolt right on to 240s?

[240o'clock]

So a good friend of mine came across some skyline r32 front brake calipers , i ended up buying them and i was wondering if they would bolt right on to my 240 or if i gotta buy other parts to make it fit, if so please tell me what other parts id need to buy to make these fit my car. Thanks for reading

[datsunnazi]

So a good friend of mine came across some skyline r32 front brake calipers , i ended up buying them and i was wondering if they would bolt right on to my 240 or if i gotta buy other parts to make it fit, if so please tell me what other parts id need to buy to make these fit my car. Thanks for reading

bolt up... new rotors are needed. re-drilled to 4 lug or 5 lugs...

[klits562]

So a good friend of mine came across some skyline r32 front brake calipers , i ended up buying them and i was wondering if they would bolt right on to my 240 or if i gotta buy other parts to make it fit, if so please tell me what other parts id need to buy to make these fit my car. Thanks for reading

I heard only the rears fit, but thats just what i've heard.
I recommend to search hard before doing this just incase.

If anything do your own write up

[bmhossain]

They fit. You'll like 'em but yeah, you'll need rotors and lines too if they didnt come with them.

[ki_JDM_ds]

All R/Z/S Chassis work on S13. You will need the correct conversion lines and correct rotors.

I did the R33 GTS-t Calipers this weekend

http://i33.photobucket.com/albums/d78/ki_JDM_ds/ZWhip/cf8e7309.jpg

[240o'clock]

They fit. You'll like 'em but yeah, you'll need rotors and lines too if they didnt come with them.

Ah yea i figured that, anyone know where to buy the rotors/lines? Just use ebay or somthin?

[JK2005]

Check out the sponsors section. Enjuku, FRSport... they both carry everything you need

[JK2005]

Agency Power Stainless Brake Line kit for 240sx to Z32 - Front [ AP-240-405 ] - Enjuku Racing - Performance Parts and High Quality Fabrication (http://www.enjukuracing.com/agency-power-stainless-brake-line-240sx-front-p-6519.html)

[/URL]

[url]http://www.enjukuracing.com/circuit-sports-front-brake-rotors-30mm-p-7667.html (http://www.enjukuracing.com/agency-power-stainless-brake-line-240sx-front-p-6519.html)

you are also going to need new pads and Everyone recommends getting a z32 BMC.

also if you don't know the history of the calipers, i Recommend rebuilding them. its pretty low cost and easy!

[CrimsonRockett]

A simple search would have answered your question(s).