MadMax670
10-27-2010, 09:43 AM
Hey Guys,
I am considering selling my Red 1995 Nissan 240SX. The car comes with RB26 engine already "installed"
-Car is in overall good condition. The paint is in okay condition, but it should really be repainted to do it any justice.
130k Miles on the car very little if any rust, never in an accident
Things that I have which come with the car:
-RB26 Engine bought from Canada, I believe it came from Japan, they said it had around 40k Kilometers on it, looks good
I have both computers from the KA24 and RB26 and the harness from the RB26. I have never started it, and it is stock.
-RB25 Transmission - Is not installed in the car, but is ready to go in
-R33 Crossmember - installed in car
-ACT Clutch - brand new, never used
-Syko Mount Kit with engine mounts, trans brackets, sway bar relocation brackets
-Appropriately sized new driveshaft
-Koyo Aluminum Radiator for S14
-Top mount T4 Turbo Manifold w/ Gasket
-Bosch 044 Fuel Pump
-Profec B Spec2 Boost Controller computer - need solenoid
Things you will need to get the car running:
-MAF solution
-Wiring needs to be done, and all electronics associated with the dash (tachometer,speedometer etc.)
-Turbo - I do not have a turbo for this car, the plan was to get a GT35R, but I have no time whatsoever to continue the swap
-Some sort of exhaust solution
I have no time for this swap in my life right now, I wish I did. I guess my main question is, how much can I get for this half-done project? I was thinking $7,000 OBO. I am sure there are other things I am forgetting. I have over $12,000 in this project. Call or text me if interested (847) 814-8928. You can also email me: fititguy AT gmail.com. Please let me know if you have any questions. I am located in the Chicagoland area.
I am considering selling my Red 1995 Nissan 240SX. The car comes with RB26 engine already "installed"
-Car is in overall good condition. The paint is in okay condition, but it should really be repainted to do it any justice.
130k Miles on the car very little if any rust, never in an accident
Things that I have which come with the car:
-RB26 Engine bought from Canada, I believe it came from Japan, they said it had around 40k Kilometers on it, looks good
I have both computers from the KA24 and RB26 and the harness from the RB26. I have never started it, and it is stock.
-RB25 Transmission - Is not installed in the car, but is ready to go in
-R33 Crossmember - installed in car
-ACT Clutch - brand new, never used
-Syko Mount Kit with engine mounts, trans brackets, sway bar relocation brackets
-Appropriately sized new driveshaft
-Koyo Aluminum Radiator for S14
-Top mount T4 Turbo Manifold w/ Gasket
-Bosch 044 Fuel Pump
-Profec B Spec2 Boost Controller computer - need solenoid
Things you will need to get the car running:
-MAF solution
-Wiring needs to be done, and all electronics associated with the dash (tachometer,speedometer etc.)
-Turbo - I do not have a turbo for this car, the plan was to get a GT35R, but I have no time whatsoever to continue the swap
-Some sort of exhaust solution
I have no time for this swap in my life right now, I wish I did. I guess my main question is, how much can I get for this half-done project? I was thinking $7,000 OBO. I am sure there are other things I am forgetting. I have over $12,000 in this project. Call or text me if interested (847) 814-8928. You can also email me: fititguy AT gmail.com. Please let me know if you have any questions. I am located in the Chicagoland area.