240trainee
10-22-2010, 08:44 AM
My PM box is full since my premie subscription expired, need to clear it out when I'm not working, so please email!!!!!
http://farm5.static.flickr.com/4112/4843540919_6ed57aafee_z.jpg
Ok, starting this so I am actually motivated to go up to the shop and take pics of everything. The time has come for me to have a clear slate, if I ever build again I will start fresh. So everything I have must go. Here is a list of the big ticket stuff, there are probably things I have forgotten about too. Also loads of spare stock parts like sub frames, axles, steering racks, etc, so ask, I might have it.
$900 - JUN Intake mani - It is a hand made copy, the thing is on point. So much nicer than Greddy. Comes with a Block off plate for the IACV, but the mount is there if you want to run an IACV. Comes with a Q45 throttle body bolted on also
http://farm2.static.flickr.com/1115/5104264842_71c78527fb.jpg
http://farm2.static.flickr.com/1131/5103670817_51f0a62321.jpg
http://farm2.static.flickr.com/1157/5104261596_89246d7f1a.jpg
$300 - S13.4 VC. If you know you know. Price is high to make these things, destroys 2 valve covers plus labor to have Brian at MA weld it.
http://farm2.static.flickr.com/1432/5104248296_0cecdcfd1e.jpg
$40 a pair - axles, 6 bolt, not run on slammed cars. Nothing exciting, have a few pairs.
http://farm2.static.flickr.com/1368/5103663311_0a59b654d8.jpg
$50 a piece - steering racks, have 2 or 3 I think, as far as I know they are all good.
$50 a pair - Z32 aluminum rear knuckles.
$200 - S13 SR Head. Sold the block, so I have the loaded head left. Nothing wrong with it, been kept in the shop and covered. Wasn't warped or anything. Comes with everything, cams, gears, etc.
$100 - S13 SR Trans - I vaguely remember it having a small grind in 3rd. Never was a problem though, drove with it til I parted it out. So I don't remember, its been over a year.
$150 - ACT Heavy Duty PP and a 6 puck unsprung clutch. Good shape if you are trying to be cheap.
http://farm2.static.flickr.com/1115/5104252608_f7140898c8.jpg
http://farm2.static.flickr.com/1342/5104250862_ba46a802a9.jpg
$80 - 3" downpipe, cat delete. Was also cut and shortened, fits very tight to the body of the car.
http://farm2.static.flickr.com/1430/5103661149_620ab5a952.jpg
$300 - Apexi 550cc Sidefeed injectors. Worked amazing, in a stock S13 SR fuel rail.
http://farm2.static.flickr.com/1351/5104354256_660ddfca80.jpg
I have a whole black interior out of the car, random parts, selling the shell too if there is any interest. So if there is anything random you need, let me know, might have it. Also, willing to sell the lot, shell of the car included for a lump sum if anyone is interested in buying the lot and saving money/ saving me the headache hahahahahahaha.
Emails are preferable, and I'll check this thread from time to time.
-Ben
ben.portyrata (at) gmail.com
http://farm5.static.flickr.com/4112/4843540919_6ed57aafee_z.jpg
Ok, starting this so I am actually motivated to go up to the shop and take pics of everything. The time has come for me to have a clear slate, if I ever build again I will start fresh. So everything I have must go. Here is a list of the big ticket stuff, there are probably things I have forgotten about too. Also loads of spare stock parts like sub frames, axles, steering racks, etc, so ask, I might have it.
$900 - JUN Intake mani - It is a hand made copy, the thing is on point. So much nicer than Greddy. Comes with a Block off plate for the IACV, but the mount is there if you want to run an IACV. Comes with a Q45 throttle body bolted on also
http://farm2.static.flickr.com/1115/5104264842_71c78527fb.jpg
http://farm2.static.flickr.com/1131/5103670817_51f0a62321.jpg
http://farm2.static.flickr.com/1157/5104261596_89246d7f1a.jpg
$300 - S13.4 VC. If you know you know. Price is high to make these things, destroys 2 valve covers plus labor to have Brian at MA weld it.
http://farm2.static.flickr.com/1432/5104248296_0cecdcfd1e.jpg
$40 a pair - axles, 6 bolt, not run on slammed cars. Nothing exciting, have a few pairs.
http://farm2.static.flickr.com/1368/5103663311_0a59b654d8.jpg
$50 a piece - steering racks, have 2 or 3 I think, as far as I know they are all good.
$50 a pair - Z32 aluminum rear knuckles.
$200 - S13 SR Head. Sold the block, so I have the loaded head left. Nothing wrong with it, been kept in the shop and covered. Wasn't warped or anything. Comes with everything, cams, gears, etc.
$100 - S13 SR Trans - I vaguely remember it having a small grind in 3rd. Never was a problem though, drove with it til I parted it out. So I don't remember, its been over a year.
$150 - ACT Heavy Duty PP and a 6 puck unsprung clutch. Good shape if you are trying to be cheap.
http://farm2.static.flickr.com/1115/5104252608_f7140898c8.jpg
http://farm2.static.flickr.com/1342/5104250862_ba46a802a9.jpg
$80 - 3" downpipe, cat delete. Was also cut and shortened, fits very tight to the body of the car.
http://farm2.static.flickr.com/1430/5103661149_620ab5a952.jpg
$300 - Apexi 550cc Sidefeed injectors. Worked amazing, in a stock S13 SR fuel rail.
http://farm2.static.flickr.com/1351/5104354256_660ddfca80.jpg
I have a whole black interior out of the car, random parts, selling the shell too if there is any interest. So if there is anything random you need, let me know, might have it. Also, willing to sell the lot, shell of the car included for a lump sum if anyone is interested in buying the lot and saving money/ saving me the headache hahahahahahaha.
Emails are preferable, and I'll check this thread from time to time.
-Ben
ben.portyrata (at) gmail.com