PDA

View Full Version : FL SR20DET part out!!! cheap, OBO!!!


AKsamuraiS14
10-20-2010, 06:37 PM
ok, heres my whole powertrain and electronics up for sale. Its time to part all this out and go V8. Mostly all parts are pretty new, just used for like 5 races tops. so here i go. Everything is OBO but please REASONABLE OFFERS ONLY.
pics will be up as soon as i start removing parts
starting
-S13 Black top sr20det long block only with brand new water pump and ARP head studs - $500
cylinder #2 only has 90psi but all other cylinders have good compression vvvvv specs below
( cylinder #1 - 130psi / cylinder #2 - 90psi / cylinder #3 130psi / cylinder #4 - 130psi )
also long block comes with arp head studs and ACL rod bearings and i did do new pistons rings also but for some reason oil ring on cylinder #2 went bad.
-GT28 BB turbo -good condition, no blown seals, normal turbo shaft play, made 321hp 309tq on 14psi - $450
-R.Y.O tubular manifold - SOLD
-R.Y.O turbo elbow - SOLD
-Turbo SS lines - $60
-S13-S14 sr20det wire harness already wired - SOLD (includes ignitor and extended injector wires)
-S13 sr20det ECU - $100
-S13 Sr20det Tranny. still good, no grinds - $150
-Blitz EBC boost controller - SOLD
-Greddy turbo timer - SOLD
-Greddy Oil catch can - SOLD
-ISIS intake manifold - SOLD
-EXEDY stage 2 clutch kit less than 1000miles(includes clutch, pressure plate and lightened flywheel) - $500
-Apexi SAFC2- SOLD
-Ultra Mounts SOLID aluminum Motor mounts - $70
-Peak Perfomance solid tranny mount - $50
-BMPC intercooler with mid mount setup piping with BMPC blow off valve - $180(inludes couplers too)
-ISIS oil cooler adapter with lines(all is needed is oil cooler) - $100
-3" Turbo down pipe - $40
-Apexi Boost gauge (reads in Bar) - $120
-S14-S15 BMPC aluminum Radiator - $130
-Sr20det fuel rail - SOLD
-Blitz Oil temp gauge - $70
-SR20det alternator - $50
-SR20det Power steering pump -$75
-sr20det light weight pulleys(alt/ps/waterpump) - $75
- Sr20det Crank pulley - $50
-sr20det coil packs - $60
-Sr20det Starter - $75
-Sr20det 370cc injectors - $50
-Sr20det throttle body - $50 PENDING SALE
-Ford Mustand Electric fan, blows insane, never overheaterd and already wired for SR - SOLD
-Sr T25/T28/GT25/GT28 outlet pipe - $30
-Samco Sr20det bottom radiator hose with thermo housing - $25
-BMPC FPR (missing lens but still works) - SOLD
i think this is all, but i will post if i have more, cant think of anything else right now.

here are most of the pics, more to be added once motor comes out of the car.

Bmpc radiator s14-s15
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0278.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0279.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0280.jpg
Ford Mustand Single Fan
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0281.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0282.jpg
Samco Bottom sr20det radiator hose with thermo housing
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0283.jpg
Greddy Catch can with SS lines
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0284.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0285.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0286.jpg
BMPC intercooler with mid mount setup with couplers and BOV
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0287.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0288.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0289.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0290.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0291.jpg
Sr20det fuel rail and injectors (sold seperately)
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0293.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0294.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0295.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/2-1.jpg
S13 sr20det ECU
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0301.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0302.jpg
Apexi SAFC2 great condition!!!
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0303.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0304.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0305.jpg
Blitz SBCII boost controller, brand new this sell for $400, comes complete, the controller itself has a crack in the corner but still works perfectly fine!
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0306.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0307.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0308.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0309.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0310.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0311.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0312.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0313.jpg
Apexi boost gauge reads in Bars... maddd JDM tyte and very rare and expensive part, get it cheap!!!
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0314.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0315.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0316.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0317.jpg
T25/T28/GT25/GT28 turbo outlet pipe
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0318.jpg
ISIS coil cooler adapter with SS lines, all is needed is oil cooler and fitting for block, can get from enjuku
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0319.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0320.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0321.jpg
BMPC fuel pressure regulator
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0322.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0323.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0324.jpg
Greddy turbo timer
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0325.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0326.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0327.jpg
Blitz Oil temp gauge, carbon black series with ss line already included **RARE**
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0343.jpg
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0344.jpg
ISIS intake manifold - throttle body not included
http://i257.photobucket.com/albums/hh204/Aero-k/for%20sale/PICT0330.jpg
more pics to come!
call me @ 954-604-1677 or shoot me a PM if ur intrested in anything. thanks!!

jdunkz
10-20-2010, 11:50 PM
Are you willing to ship the injectors to Canada? if so how much shipped to s7j 5g3?

AKsamuraiS14
10-21-2010, 05:49 AM
it should be like $20 to ship the injectors. so $70 shipped to ur door. lmk

project-D180
10-21-2010, 07:38 AM
if u still have injectors pm me price shipped to 07753

ragu9000
10-21-2010, 04:05 PM
shipping price on greddy turbo timer and catch can to 07871?

AKsamuraiS14
10-21-2010, 05:24 PM
Apexi SAFC2- SOLD
GREDDY CATCH CAN - PENDING SALE
FUEL PRESSURE REGULATOR - PENDING SALE

kab_47
10-21-2010, 08:12 PM
just pm'ed you about the ecu, my zip is 31419

blksylv
10-21-2010, 08:48 PM
hey ur pm box is full

Locko
10-21-2010, 09:27 PM
40 for greddy catch can with the lines picked up tomorrow.

AKsamuraiS14
10-23-2010, 11:18 AM
just pm'ed you about the ecu, my zip is 31419


U got reply

AKsamuraiS14
10-23-2010, 11:19 AM
hey ur pm box is full


its been cleared. open to messege.

AKsamuraiS14
10-23-2010, 11:21 AM
40 for greddy catch can with the lines picked up tomorrow.


the buyer is suppose to be sending payment already, i messeged him today, if he doesnt reply i have someone else ready to pay for the catch can, and if neither come through by monday, ill let u know.

lrb99
10-27-2010, 05:28 AM
moneys been sent for 2 days now lmk

lrb99
10-27-2010, 08:33 PM
whats up man whats going on??

hatchbaak
10-28-2010, 06:32 PM
Fan and Turbo timer sold to ME!

lrb99
10-28-2010, 07:04 PM
3rd day come on man whats up

AKsamuraiS14
10-29-2010, 05:37 PM
^^ just sent u a messge man. been very busy at work this week i havent been able to leave to ship it out. ill have it shipped on saturday.

and everything is updated, still parts available.

handinpants
10-30-2010, 09:51 PM
holy crap your in coral springs florida, no one is from there, i used to spend my winters there with my grand parents, and well you prolly already know marilyn manson is from there too.... and a ton of old people who can't drive for shit....

ANTHONYV928
11-20-2010, 11:15 AM
Do you still have the sr?

zz_kouki_zz
03-07-2011, 07:52 PM
Is this thread still alive? coz I need some of the parts....lemme know pls!

airhead
03-07-2011, 08:52 PM
Blitz BLM Oil temp gauge sold to meh =D

airhead
03-18-2011, 09:53 AM
so whats up with the REFUND?
i havent had a respond since last week??

sr20comic
03-20-2011, 07:35 PM
You still have the ecu?

JDS Performance
03-21-2011, 02:47 PM
WTB; S13 SR20DET Redtop Various Parts Needed

I am putting a SR back to totally stock for my upcoming video series - my donor motor is missing quite a bit.

Water Neck
It is the neck in front that hooks to the bottom radiator hose
If you have the mounting bolts too that would be awsome!

I also need the alternator belt tensioner setup - I have the bracket but not bolts/nuts/washers
I need the (3) bolts that bolt the power steering bracket to the block - I have the one in front
I need the (4) bolts & small plastic isolators that go under them to bolt down the fuel rail
I need the (4) water pump pulley nuts

I also need the fuel hardline that monts to the rear of the fuel rail - I also need that rubber line and clamps to attach it as well as the bolt that bolts it to the intake manifold torwards the front

I need the (2) turbo inlet pipe nuts/washers as well as the (3) bolts/washers for the turbo outlet pipe T25 turbo.
I also need (3) turbo banjo bolts and crush washers for them.

I need the stock catch can "black box" and mounting bolts and hose.

I need the A/C bracket with mounting bolts

Pix/prices shipped to Concord,NC 280825

[email protected]
__________________

niSm095
03-31-2011, 04:05 PM
do the coil packs have the harnesses?

JDS Performance
03-31-2011, 05:13 PM
do the coil packs have the harnesses?

I have a coil pack harness for $35 shipped
[email protected] < Send Paypal as a personal gift (fee free)