theinfamous1
10-18-2010, 12:03 AM
Posting this for a friend. Best bet is to call or text snip ask for snip. All Parts are located in snip and are coming off the car tomorrow, He is willing to ship anywhere.
rb20 long block rebuilt 3000k ago.
-high compression rb20det
-acl race main and rod bearings
-oem nissan valve seals
-oem nissan headgasket
-arp head studs
-modified oil pan (more capacity and stronger so it doesnt dent)
-oil return from cylinder head to oil pan
-new plugs
-mishimoto thermostat
$500
rb20 trans, has around 110k on it. needs striker arm$150
will part:
-gtr valve covers-$200
-555cc tomei injectors with 3000k on them, these are 850 new. $500
-gtr resistor pack$75
-z32 maf with pigtail $150
-nistune ecu with individual user licence soldered into rb20 ecu, with racing greed tune $500
-greddy clear timing cover$80
-hks cam gears$200
-greddy timing belt with 3000k on it $75
-new water pump$75
-yellowjacket coil packs$250
-plazmaman performance intake plenum$750 (+21whp dyno proven)
turbo stuff
-tubular top mount exhaust manifold, greddy i think? or very good copy $250
-garret t3t04e turbo (rebuilt at the same time as motor with new wheel and turbine) $450
-3"turbo back to dual 2.5" blast pipes $200
-tial 38mm wastegate $175
-screamer pipe goes with wastegate
-braided stainless line and silicone return
will sell all of the turbo stuff for $1000
-act clutch used for around 10k $250
-b&m short throw shifter modified for rb 20 trans will come with rb20 striker arm $200
-fmic-sold
-mishimoto radiator, may not sell if itll work for my new build. will update
-mishimoto high pressure rad cap
-engine oil cooler with sandwich plate $125
-power steering fluid cooler with lines $100
-stainless braided russel -6 fuel lines and fittings with new filter, compression fittings and aeromotive fpr, fuel rail and return line $300
-dual fans$75
http://i25.photobucket.com/albums/c60/mxracer69/a63fa719.jpg
ichiba 5 lug hubs, front and rear. new bearings in front. extended ichiba studs in front, arp studs in the rear $375
full gtst brake conversion front and rear. hawk pads all around and new rotors last year with e brake cables and braided lines in front $350
cooling plate for rad $25
200sx rear taillight peice, $50 and your stock one
more stuff to come...
rb20 long block rebuilt 3000k ago.
-high compression rb20det
-acl race main and rod bearings
-oem nissan valve seals
-oem nissan headgasket
-arp head studs
-modified oil pan (more capacity and stronger so it doesnt dent)
-oil return from cylinder head to oil pan
-new plugs
-mishimoto thermostat
$500
rb20 trans, has around 110k on it. needs striker arm$150
will part:
-gtr valve covers-$200
-555cc tomei injectors with 3000k on them, these are 850 new. $500
-gtr resistor pack$75
-z32 maf with pigtail $150
-nistune ecu with individual user licence soldered into rb20 ecu, with racing greed tune $500
-greddy clear timing cover$80
-hks cam gears$200
-greddy timing belt with 3000k on it $75
-new water pump$75
-yellowjacket coil packs$250
-plazmaman performance intake plenum$750 (+21whp dyno proven)
turbo stuff
-tubular top mount exhaust manifold, greddy i think? or very good copy $250
-garret t3t04e turbo (rebuilt at the same time as motor with new wheel and turbine) $450
-3"turbo back to dual 2.5" blast pipes $200
-tial 38mm wastegate $175
-screamer pipe goes with wastegate
-braided stainless line and silicone return
will sell all of the turbo stuff for $1000
-act clutch used for around 10k $250
-b&m short throw shifter modified for rb 20 trans will come with rb20 striker arm $200
-fmic-sold
-mishimoto radiator, may not sell if itll work for my new build. will update
-mishimoto high pressure rad cap
-engine oil cooler with sandwich plate $125
-power steering fluid cooler with lines $100
-stainless braided russel -6 fuel lines and fittings with new filter, compression fittings and aeromotive fpr, fuel rail and return line $300
-dual fans$75
http://i25.photobucket.com/albums/c60/mxracer69/a63fa719.jpg
ichiba 5 lug hubs, front and rear. new bearings in front. extended ichiba studs in front, arp studs in the rear $375
full gtst brake conversion front and rear. hawk pads all around and new rotors last year with e brake cables and braided lines in front $350
cooling plate for rad $25
200sx rear taillight peice, $50 and your stock one
more stuff to come...