93 ka24de speed sensor wires?? Help!!

[tpetrucci33]

Ok so I have a 93 kade. Automatic to manual swap. The speed sensor clip was cut on the tranny sensor. I have no clue what wires to splice into. Pics or any help would be greatly appreciated!

Thanks!!

[tpetrucci33]

Anybody?! I have 2 wires coming from the speed sensor. Does anybody know where I can splice them into? Please help!!

[GSXRJJordan]

The two wires from the speed sensor (S13 = Y/Blue and Y/Black) go directly into the lower harness via E202, a grey 8-pin plug, right under the fusebox. Here's a picture of it:
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs397.ash2/67530_10150098826619942_830064941_7516477_8150671_ n.jpg

Polarity really doesn't matter. Good luck.

[tpetrucci33]

thanks man!!!!! really appreciat it

[xislander]

Guys sorry to bring this back up but my speedo does not work and I looked under the car and found my speed sensor hooked up but the the wires (black/green) are just hanging there not hooked up to anything..where exactly does it need to hook up to? thanks guys I know you guys are very knowledgable about this and I did search but the poster above posted a picture but i cannot see it anymore.

[GSXRJJordan]

The FSM can help.

The VSS wires travel through the trans subharness to the 8-pin plug by the fusebox (wire colors vary by model s13/s14/s15). There they go through the chassis harness, through the SMJ, and up to the cluster. Polarity doesn't matter, just get them attached to the correct wires at the fusebox and your cluster should read speed.