PDA

View Full Version : Transmission Whining Sound


KiLLeR2001
10-12-2010, 12:51 PM
I know this topic has been covered extensively. And I've done a lot of reading. I've come to the conclusion that what is making the noise in my transmission is most likely my input shaft bearing. However, I'd like for you guys to watch this video, in the beginning you can hear the noise. It only happens when the clutch pedal IS NOT pushed in. Once I push the clutch pedal in, it goes away. I've already replaced my TOB a few months ago so I don't think it is that.

QxPRLjTlUto

You can hear the whining sound soon after I start my car up in the garage.

Thanks in advance.

edit: Don't mind me saying stupid things :P

lazysk8er2
10-13-2010, 03:48 PM
if its not ur tob check ur fluid levels. also could be syncros

slider2828
10-13-2010, 04:29 PM
Did you change your pilot bushing as well? What clutch and what TOB did you use? Did you great the TOB? I use a nissan Z32 one.... bigger and better for stock clutches...

KiLLeR2001
10-13-2010, 08:37 PM
I did not change the pilot bushing. I have an ACT clutch with the ACT TOB for SR20DET. Transmission is a little notchy sometimes, I've already replaced fluid with new Redline MT-90.

jesse_s13
10-13-2010, 08:44 PM
"gated community is gated" lol

omgRWDgoodness!
10-13-2010, 09:04 PM
I enjoyed watching this. We ball hard in Florida.

Exas Spec D
10-13-2010, 09:15 PM
I have the same exact problem with my transmission. 1st, 2nd, and 3rd gears have highly audible whine noise and 4th to 5th has none though. You can only hear it when clutch is depressed. I already filled up my transmission with 70w-90 GL4 gear oil.

KiLLeR2001
10-13-2010, 09:53 PM
I enjoyed watching this. We ball hard in Florida.

Lol then you should enjoy Part 2 of this... This is me getting mad at Florida drivers hehe...

Xb45NeCl_JU

slider2828
10-13-2010, 11:03 PM
Hey killer sounds like your car is running great... Get rid of the MT90 crap, its crap!!!! You gotta go amsoil for sure GL4..... MT90 sucks....

OMG that is hella loud.....

ACT sucks tooo that clutches suck balls and have known to be noisey.... Try a Nissan z32 TOB....

ACT SUCKS....

KiLLeR2001
10-13-2010, 11:15 PM
Yeah, probably gonna have to replace clutch sooner or later... At higher RPMs if I really slam it, it will show signs of slipping... When the clutch is unbearable to drive with I'll switch it out along with the oil... Any recommendations for clutch brand since ACT sucks?

jesse_s13
10-14-2010, 11:20 PM
spec stage 3 =)

soreballz
10-14-2010, 11:36 PM
spec stage 3 =)
You MUST be new to this car thing. Spec clutches are garbage. This is common knowledge.

omgRWDgoodness!
10-15-2010, 12:38 PM
Lol then you should enjoy Part 2 of this... This is me getting mad at Florida drivers hehe...


Loved it. Same situation with parking at FAU, must be a tradition or something among state schools.

240sx123$
10-15-2010, 12:58 PM
Id take a Spec clutch over an ACT anyday. Last ACT I bought had RUST (not just surface rust) on the pressure plate.. brand new out of the packaging. Neither ACT nor their distributor would help me out on what was very obviously a defective part. Spec sucks too, but ACT is complete horse shit.

Exedy all day.

240sx123$
10-15-2010, 01:01 PM
Here's the awesome quality that ACT is producing. Note the original packaging still on it. This was taken minutes after opening the clutch.

http://img.photobucket.com/albums/v195/IneedabettrBike/aaa.jpg

slider2828
10-15-2010, 02:44 PM
ACT and spec sucks balls..... RPS Max Turbo Clutch Street Disc.... freaking awesome, they manufactured 2JZ TRD Stage 1 clutches for the longest time.....

Been running that forever....

Exedy Stage 2 isn't bad, but anything over 250WHP is going to kill that clutch fast. I am just not a fan of pucked clutches cause street engagement is harshs....

R33E8
10-15-2010, 02:57 PM
I have a spec stage 4 running fine... what are you guys talking about? Also, I think my tranny whiles louder than that.. Probably the input bearings going which is not letting the gears mesh properly.. Mine was fine before I actually started making power..

KiLLeR2001
10-15-2010, 03:55 PM
I need something good for about 300HP (my goal) daily driven car...

slider2828
10-15-2010, 04:46 PM
I make 330whp on a dyno dynamics and it doesn't whine like that.... My rear diff does though and just got it done ober the weekend....

unreal-
10-16-2010, 02:39 AM
killer2001, havent seen your ass on 240sxforums in a long time..;)

KiLLeR2001
10-16-2010, 03:19 PM
killer2001, havent seen your ass on 240sxforums in a long time..;)

Yeah they banned me for some stupid reason and I never went back there.