Flash_RPS13
10-10-2010, 10:12 AM
Here comes that last parts of my s13 partout,OK as far as the coilovers go,they ride amazing with no problems,way better than megan's,and they have less than 1k miles on them,but theyve been in an accident last year
and the front passsenger side coilover got professionaly repaired,total cost of it was 40 dollars,so it wasnt anything major,as described in picture below
call/txt 951-217-4601 or 1-909-697-7450
Full set= 4 coilovers(one is still in the car)-SOLD
TC sportline Coilovers
-20 way adjustable
-1k miles
-Rides Great and Slams Down (better than Megan's)
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286725115525.jpg
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286724460621.jpg
THE piece where the bolt goes in was bended,so it was bended back and Welded a strong ass piece of aluminum,
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286724433383.jpg
KA24de 5spd Tranny w/Short Shifter(Shifts Smooth,NO GRINDS)
just a little dirty-SOLD
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179893923.jpg
s13 rear sidemarkers-5 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179850003.jpg
s13 KA24de exhaust manifold W/Downpipe-25
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179804761.jpg
2.5mm 4x114.3 spacers-7 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179749739.jpg
s13 PW Switches,and dooe handle-5 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179454455.jpg
and the front passsenger side coilover got professionaly repaired,total cost of it was 40 dollars,so it wasnt anything major,as described in picture below
call/txt 951-217-4601 or 1-909-697-7450
Full set= 4 coilovers(one is still in the car)-SOLD
TC sportline Coilovers
-20 way adjustable
-1k miles
-Rides Great and Slams Down (better than Megan's)
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286725115525.jpg
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286724460621.jpg
THE piece where the bolt goes in was bended,so it was bended back and Welded a strong ass piece of aluminum,
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1286724433383.jpg
KA24de 5spd Tranny w/Short Shifter(Shifts Smooth,NO GRINDS)
just a little dirty-SOLD
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179893923.jpg
s13 rear sidemarkers-5 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179850003.jpg
s13 KA24de exhaust manifold W/Downpipe-25
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179804761.jpg
2.5mm 4x114.3 spacers-7 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179749739.jpg
s13 PW Switches,and dooe handle-5 each
http://i705.photobucket.com/albums/ww58/Flash_240sx/PART_1285179454455.jpg