Drink&Drift
10-06-2010, 07:03 PM
I am going a different route motor wise, so i am selling my full s13 blacktop SR20 setup, the motor has a spun bearing, it happened literally a few days after the motor was re built. if you know how to put in new bearings it shouldnt cost you more then 200$ and a couple hours of work. i was originally going to fix the motor and use it in my car but ive decided to see if i can find a new home for it.
These are all the parts the motor has and will come with:
180SX SR20 Blacktop
.20mm Bored over
CP pistions
OEM Rods
OEM micropolished and balanced crank
New Valve Seals
Ported & Polished Head
5-speed SR20 tranny
AC Compressor and All lines
Brand new SPEC stage 3 clutch, barely broken in
OEM Silvia Radiator, fans and fan shroud
S13 Wiring harness
ECU
ISIS Tubular manifold
ISIS Downpipe
ISIS Front mount intercooler kit
Greddy Type-S Blow off valve
S15 T28 Turbo
Intake w/ filter
JDM BEE*R Full 3" Exhaust
Price: 1450$ Picked up
Location: Orlando
Contact: (561)846-2054
WILL NOT PART
Again you are getting well over $2000 in parts alone not including the motorset, all the motor needs is new rod bearings put in and its a fully running built SR with a T28, and you have everything needed to put it in an S13, literally, everything.
http://i12.photobucket.com/albums/a213/tunershark/bilde.jpg
http://i12.photobucket.com/albums/a213/tunershark/bilde4.jpg
http://i12.photobucket.com/albums/a213/tunershark/bilde3.jpg
Come get it now before its gone, or i decide to rebuild it.
Regards
Alex
These are all the parts the motor has and will come with:
180SX SR20 Blacktop
.20mm Bored over
CP pistions
OEM Rods
OEM micropolished and balanced crank
New Valve Seals
Ported & Polished Head
5-speed SR20 tranny
AC Compressor and All lines
Brand new SPEC stage 3 clutch, barely broken in
OEM Silvia Radiator, fans and fan shroud
S13 Wiring harness
ECU
ISIS Tubular manifold
ISIS Downpipe
ISIS Front mount intercooler kit
Greddy Type-S Blow off valve
S15 T28 Turbo
Intake w/ filter
JDM BEE*R Full 3" Exhaust
Price: 1450$ Picked up
Location: Orlando
Contact: (561)846-2054
WILL NOT PART
Again you are getting well over $2000 in parts alone not including the motorset, all the motor needs is new rod bearings put in and its a fully running built SR with a T28, and you have everything needed to put it in an S13, literally, everything.
http://i12.photobucket.com/albums/a213/tunershark/bilde.jpg
http://i12.photobucket.com/albums/a213/tunershark/bilde4.jpg
http://i12.photobucket.com/albums/a213/tunershark/bilde3.jpg
Come get it now before its gone, or i decide to rebuild it.
Regards
Alex