ned quick answer please help asap

[dreamin240sx]

is an ecu bad if the light comes on. the light on the ecu?

[[email protected]]

nope, just means its on diagnosis mode

[dreamin240sx]

so if it goes off when you roll over the motor does that mean its in diagnosis mode

[[email protected]]

huh?
all the way clockwise is diagnosis mode i believe, all the way counterclockwise, is in normal operational mode. just leave it normal dude

[94spitfire91]

should be simple use a screwdriver and turn it counterclockwise your green and red lights should stop flashing

[Ilya]

Yes! its very bad. Don't drive the car! sell it to someone else!!! and forget about your hobby.

[Rancimo322]

hey quick question!! i swaped the stock cluster no my 90 s13, for the jdm but i dont know what to repin? the od/spd and temp are the only 1s not working ? everything else is great !! the manual only helps so much !

[Ilya]

no my 90 s13

KEEP IT THAT WAY!!! or get rid of your car! Do some research before doing a project and make sure you understand what needs to be done for it to work instead of looking like a fool asking for help once the parts you installed are not working because you had no idea how to install them in the FIRST place. OEM cluster is just as functional as a JDM cluster AND you dont need to re-pin anything! WHAT A CONCEPT!

[fufanu180]

keep it that way!!! Or get rid of your car! Do some research before doing a project and make sure you understand what needs to be done for it to work instead of looking like a fool asking for help once the parts you installed are not working because you had no idea how to install them in the first place. Oem cluster is just as functional as a jdm cluster and you dont need to re-pin anything! What a concept!


werrrddd!!

[Okinawandrifter87]

huh?
all the way clockwise is diagnosis mode i believe, all the way counterclockwise, is in normal operational mode. just leave it normal dude

You are correct my friend.