az_240
09-30-2010, 02:18 AM
http://i12.photobucket.com/albums/a229/livinglegendlll/ImportedPhotos00023.jpg
http://i12.photobucket.com/albums/a229/livinglegendlll/ImportedPhotos00024.jpg
http://i12.photobucket.com/albums/a229/livinglegendlll/ImportedPhotos00026.jpg
Selling some nicely done up s14 RLCA's that were originally off my kouki. The RLCA's have never been in an accident and are perfectly straight.
These are freshly painted with durable appliance paint (look fresh from the factory) and have brand new Moog ball joints ($35 each new) pressed in along with new ES polyurethane bushings (kit was $60, can't buy these bushings seperate from the kit) and zerk grease fittings.
I had some poly bushings on a different pair of rear lower control arms and they would begin to squeek after only a few weeks so I installed the fittings on this pair with new bushings to make greasing much easier.
Another problem I had on the previous set of poly bushed RLCA's was the bushings were too long and would get sandwiched in the mounting brackets making them stick and prevented suspension travel. I trimmed the ends of the bushings down slightly so the metal sleeve is barely sticking out/flush with the bushing so they do not bind and stick against the brackets.
These are nice and stiff... great for the track or a daily.
$140 shipped for both arms obo - SOLD!!!!!!!!!!!!!!!!!!!!!!!
http://i12.photobucket.com/albums/a229/livinglegendlll/ImportedPhotos00024.jpg
http://i12.photobucket.com/albums/a229/livinglegendlll/ImportedPhotos00026.jpg
Selling some nicely done up s14 RLCA's that were originally off my kouki. The RLCA's have never been in an accident and are perfectly straight.
These are freshly painted with durable appliance paint (look fresh from the factory) and have brand new Moog ball joints ($35 each new) pressed in along with new ES polyurethane bushings (kit was $60, can't buy these bushings seperate from the kit) and zerk grease fittings.
I had some poly bushings on a different pair of rear lower control arms and they would begin to squeek after only a few weeks so I installed the fittings on this pair with new bushings to make greasing much easier.
Another problem I had on the previous set of poly bushed RLCA's was the bushings were too long and would get sandwiched in the mounting brackets making them stick and prevented suspension travel. I trimmed the ends of the bushings down slightly so the metal sleeve is barely sticking out/flush with the bushing so they do not bind and stick against the brackets.
These are nice and stiff... great for the track or a daily.
$140 shipped for both arms obo - SOLD!!!!!!!!!!!!!!!!!!!!!!!