HID problem

[95zenkisr20]

i just installed ddm hid low beams and when i turn my high beams on the hids shut off and just the high beams stay on when i would obviously like to have both low and high beams on.. any help would be great

[cotbu]

We have a positive switching system for the headlights, At-least in an s13. So you need to run a relay, or create a separate circuit.

I've used a wolstentech TDR with good results, for daily driving.
I'm sure there are others available.
Time Delay Relay (http://www.wolstentech.com/)

[Enna]

Its because you have a zenki, I'm actually surprised you never found this out before you bought the HID's. You have to do a relay setup like cotbu mentioned to get them both working at the same time. Afik only the S14 Kouki had both at the same time.

[95zenkisr20]

thanks guys

[axlegrease]

I've heard of zenkis with different low beam bulbs from the factory. Most zenkis though, have a hi/lo h4 bulb for the low beam. When you turn the high beams on, a separate filament in the h4 bulb turns on alongside the 9005 or whatever the inside high beam bulb is, which is why the connector has 3 prongs. As for the ddm hids, they sell the h4 kit with a hi/lo option which retains this function perfectly.

[benj1159]

Ddm sucks ass