PDA

View Full Version : OH S14 95 Zenki Part Out...anything big or small, HOLLA!


SoloSilvia
09-28-2010, 04:44 PM
The background of the car:

95 240sx base auto that I pulled the engine out to use in another car. I bought this car a few months ago and drove it over an hour home and have been taking it out here and there to make sure everything stayed in working order! This was a low mileage 90,xxx miles and one of the main reasons I bought the car. The bad was this car was/is rusty. The Frame is in fine shape, mainly outer now. When I bought the car the driver seat was falling thru the floor. I propped a peice of wood under it and drove home, noticing on the way home the ball joint pass side was bad. I have since replaced the ball joint with a moog. The car has newer tierods and balljoints now! Brakes are near new, the tires are almost new. It was a daily driver and my plans were to patch it up and save her. I started patching up the floor and that is all done(see pics below)! I replaced the carpet insulation also with brand new material! All interior is all Black and fairly Clean with exception of driver door panel(there is a hole in the arm rest portion) Seats are all in good shape, a lil steam clean be nice, no rips/tears/burns. I dont think this car has ever been in an accident, just got rusty in its life. The car is an automatic and has plenty of pep to it!

So heres the deal. I found a new shell that needs an engine. and I dont have time to keep putting into cosmetics of repairing the rust on this car. As previously stated this was a daily driver, I am just using the engine out of it and possibly keeping the front seats(for sale also $100)! The Rest of the car is up for grabs! Take it as whats left, or anyway/anything you need, either way is fine with me! I will just need it gone soon. As I have to many 240's and parts laying around!

PLEASE PM if you yu want anything!

PART OUT IS UNDER WAY!!! IF YOU NEED ANYTHING LET ME KNOW!!!

Im driving it in my shop TODAY and proceeding thetear down! So PM me anything you need, first come first serve!

Cars pretty torn down, and its being ready to be cutup and scrapped unless someone wants the chassis, speak now!

Update: Here is a Link to my photobucket where I have all my stuff for sale:

stuff for sale pictures by brsilvia - Photobucket (http://s109.photobucket.com/albums/n74/brsilvia/stuff%20for%20sale/)

SOLD LIST:
-Radio Trim
-Engine Harness, Upper and Lower
-Hood
-Headlights/Corner Lights
-Rear Bumper
-Windshield
-Driver Window Amp
-Grille
-Headlights/Corner Lights
-Core Support
-Rear bumper Cover
-Electric Fan
-Radiator Shroud
-A/T Transmission
-Steering Wheel
-Dash (*still have both airbags for wheel and dash*)
-Front Bumper Lights(clear, not orange sides)
-Headliner
-Driver Window Switch/trim
-Trunk Latch(chassis side, Latch still on trunk itself)
-Driver Window Motor
-Radiator Overflow Tank
-Rear View Mirror assembly
-Mirrors
-Radiator
-Passenger Door Glass

ss1156ss
10-01-2010, 01:55 AM
How much for the driver's side window switch and bezel?

SoloSilvia
10-03-2010, 09:47 AM
I update my sale list as parts are sold, if its up top in the list, I dont have it! If not, I do!

Still have alot of black interior peices I know people out there are looking for!!!

And this is still a rolling chassis, just rusty and missing the above items, would make a great race project for drift , or whatever! If you can weld , you can still keep this car alive! Rest of shell is $500 OBO, you tow home! I will be however completely stripping it and cutting up to scrap within a week or two.

SoloSilvia
10-07-2010, 12:01 PM
Bumpity Bump... Taking best offers on parts! :mepoke:

pincheturbo
10-07-2010, 10:06 PM
by any chance, would you happen to have a headlight connector? i need the driver side one. mine melted. i can provide a pic if you need one..

PM me!:mepoke:

240fame
10-07-2010, 10:11 PM
dang wish i knew about ur partout before i needed front windshield!

HS13KLS
10-08-2010, 01:05 AM
defrost button?

DenkiMan!
10-08-2010, 08:59 AM
are those rear calipers you gots?

milkman2089
10-08-2010, 09:03 AM
hood latch shipped to 79936?

bmoses
10-08-2010, 09:32 AM
trans mount, $30 shipped to 46979. Paypal ready

240fame
10-08-2010, 10:45 AM
if u don't have any dents on doors both drive an passenger side lmk
im in cleveland so i can come pick them out...pm me!
thanks

s14boy
10-10-2010, 12:22 AM
do you have the door trim, the center counsol, and the bottom carpet pannel for the trunk? if you have any of theis pleaze pm or email me. thanks
Email: [email protected]

SoloSilvia
10-17-2010, 11:25 AM
One last time! Still got lots of goodies!

s141996
10-17-2010, 03:34 PM
need the climate control trim and door handles shipped to 92555 thanks

West87
10-18-2010, 06:00 AM
Is the power steering gear and linkage available?

greenkouki
10-18-2010, 08:03 AM
Xo u have the pie e with the ac vents In the center

IIIXziuR
10-19-2010, 04:19 PM
Do you have (all front):
- cross member
- lower control arms
- Spindles/knuckles
- hubs

If so how much shipped to 08831, thanks

Flipzide
10-19-2010, 05:51 PM
how much do you want for the rear brake calipers and e-brake cables shipped to 92025?

SoloSilvia
10-29-2010, 10:49 AM
Can I let a Halloween Bump slide...:cool:

jdmzenks14
10-29-2010, 11:42 AM
Do u still have the fenders

racerx2k1
10-29-2010, 12:10 PM
I update my sale list as parts are sold, if its up top in the list, I dont have it! If not, I do!

Still have alot of black interior peices I know people out there are looking for!!!

And this is still a rolling chassis, just rusty and missing the above items, would make a great race project for drift , or whatever! If you can weld , you can still keep this car alive! Rest of shell is $500 OBO, you tow home! I will be however completely stripping it and cutting up to scrap within a week or two.

Bumpity Bump... Taking best offers on parts! :mepoke:

One last time! Still got lots of goodies!

Can I let a Halloween Bump slide...:cool:

2 bump limit. You can start new thread in 3 days.