View Full Version : IN RB25DET Engine, harness, ECU
neukin
09-27-2010, 08:28 PM
Have the motor sitting here we used for mockup and such to make some turbo manifolds (http://www.neukin.com). I run the company here so your not dealing with some goof motor or deal. Need it outa here. Has brand new oil pan that showed yesterday. No alternator on it but i might have around here somewhere. As shown no turbo but that manifold is for T3 so that shouldnt be hard. lmk if your interested. I think $850 is a good deal if you can pick it up. I actually bought a new used ignitor or something that mounts on top of the valve cover there as that was damaged in shipping. Wire harness is pretty much complete minus this is one 8 wire plug missing that may have connected to the dash harness or something but like anything its a custom motor for a project so everything is not going to be easy. Sat around last year or two, never ran, should be ready to rock, paid about 1400 for it and a auto trans i have here from company off ebay... idk why i bought it like this but i did and how you can get this for 850 haha.. Thanks!
http://www.neukin.com/v/vspfiles/assets/images/rbizzle.jpg
GlidinSlidewayz
09-27-2010, 09:51 PM
Whats bottom dollar on this? Im interested!
neukin
09-28-2010, 05:24 AM
$850 come pick it up, if your here with cash i mean maybe ill do $50 off towards your gas. Shoot me some messages and lets do this.
neukin
10-01-2010, 07:22 AM
Ok so this is a Early R33 RB25DET (93-96)
I seen the dip stick is missing. Was going to toss in some BKR7E plugs so thats ready for you.
I was cleaning teh motor up and before putting oil pan on coated crank, rods and bottom of pistons with oil, then poped the coil packs and old spark plugs out and squezzed 20ml of oil on top of the pistons. turned it over a few times with wrench. Put new oil pan on but didnt seal it, poured more oil into the motor and rigged the automatic flywheel to a starter to the backing plate it came with and was able to turn it over. So its all lubed ready to rock, compression was like 210 in all cylinders. Keep in mind it was a automatic too so it was babied.
Okinawandrifter87
10-01-2010, 07:40 AM
Is shipping in the picture anywhere? Or are you not shipping. I was wondering if you do ship how much to ship to 29904? I know if you do ship that shipping is extra.
neukin
10-01-2010, 09:52 AM
If its being delivered to you at your house and a smaller truck is needed with lift gate im sure its like $200-250 for shipping. I guessed 400lbs, ship class 85, my zip is 46803... so you can call a local ship hub and get a quote. I would drop the pallet off at my hub here so figure that in.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.