R33E8
09-26-2010, 01:38 PM
Year: 1996
Make: Nissan
Model: 240sx
Color: Blue Emerald
Mileage: 121xxx
Transmission: Manual
Price: 9k obo..
Description: I'm getting tired of buying stuff for my car so I'm putting it up for sale.. It's a 96 240sx with around 121k miles.. Here is a list of stuff done to it.. It's a great daily and gets good gas mileage.. I'm think I'm done with cars for now.. I just started hitting boost a week ago and it runs strooonggg at 14lb's of boost... It's probably pushing between 350 and 400whp.. with the meth injection u can probably bump the boost up to around 23-24psi and get closer to 500whp..
Here is a list of stuff done to it..
Engine/drivetrain
Freshly rebuilt, around 3k miles, probably went through 8-10 oil changes so far...
Arias pistons 89.5mm 8.8:1, Fresh piston rings installed and the piston skirts coated
Eagle rods
King rod bearings
Clevite main bearings
Arp headstuds, main studs, rod bolts
Crank was polished and rotating assembly fully balanced..
3 angle valve job, new valve seals, cam cup things were shimmed properly so no ticking..
cylinder head and block are surfaced to use a Cometic gasket with no problem
Everything blue printed, block was honed, hot tanked, new freeze plugs, painted, etc..
New oil pump
Fel-pro head gasket
Precision 1000cc injectors
JGY fuel rail, powdercoated black..
Garrett GT35r dual bb turbo E style 3" cover with a .82 ar hot side t3 footprint
a custom built tubular equal length manifold with a t3 foot print
JGS 40mm wastegate
3.5" deep intercooler
300zx brakes in the front with drilled and slotted rotors
Spec stage 4 clutch
B&M short shifter
hks ssqv bov with recirculation fitting
Tanabe smr exhaust 3"
test pipe 3"
VLSD
Bikirom on a 95 OBD1 ecu tuned by romisburning..
Recently installed:
Snow performance stage 2 boost cooler for MAF sensors.. Installed with 625cc/min nozzle..
New walbro 255 relayed
Fuelabs FPR with -6 AN pushlock fittings
Apex'i air filter
Interior
Very clean IMO 9/10?
python 990 keyless, remotestart alarm
pioneer 6800dvd with indash 6 disk dvd
polk 4ch amp with polk speakers all around.
boost,oil press, water temp gauges mounted on the a pillar.
Apexi SAFC2 (maf needs to be wired in)
Apexi AVC-R
Relocated Battery - some nice yellow optima or something..
Plx m300 wideband o2 with a fairly new o2 sensor and an extra one..
Exterior 5/10 the front end needs to be repainted to match.. the front bumper has a few cracks, many small dings and a few dents
300zx turbo wheels (also comes with an extra set of turbo wheels and an extra front for a spare...)
AIT racing R33 style front bumper (real r33 gtr front lips should fit with a bit of finesse, AIT has the front lip for sale for $110)
8000k HIDs
LED tail lights
LED front turn signals (in progress, they will be clearcorners dual color style)
Possibly LED reverse lights if I ever get around to it..
carbon fiber hood
Tein coilovers
That's what is installed.. it will also come with
Energy suspension sub frame bushings (i think the current ones are shot)
second cylinder head
extra z32 maf
extra set of 300zx twin turbo wheels
various other parts i have that I can't think of right now..
Everything needed to pass nj inspection
97 engine wiring harness
Hell i might even give you stuff like an engine hoist and engine stand if you buy the car..
The bad:
Needs a new front lower ball joint (included for both sides)
Needs new rear subframe bushings (included)
Needs an alignment - project yamoto RUCAs and toe rods included, car still tracks straight, just too much camber in the rear..
Body work, lots of dings and dents from when i got the car.. I just put primer on the front fenders and will probably fix up the cracks and primer the front bumper.. Eventually paint them all gloss black or emerald blue.. There is some rust on the rear 1/4 panel by the wheel.. The trim around the sunroof looks sketchy but there are no leaks :)
Needs new tires in the rear.. I was going to get some drag radials...
some pictures..
before putting primer on the front fenders (the old paint looked ok in the picture but was TERRIBLE in person)
http://img199.imageshack.us/img199/874/img4791f.jpg
Engine apart being rebuilt
http://img260.imageshack.us/img260/20/img44222.jpg
Injectors cleaned and flow benched:
http://a.imageshack.us/img837/7711/img7261.jpg
http://img710.imageshack.us/img710/3332/img7306medium.jpg
http://img178.imageshack.us/img178/1035/img7305medium.jpg
http://img836.imageshack.us/img836/2818/img7303medium.jpg
http://img718.imageshack.us/img718/2587/img7302medium.jpg
http://img827.imageshack.us/img827/305/img7301medium.jpg
http://img842.imageshack.us/img842/4157/img7300medium.jpg
http://img829.imageshack.us/img829/6278/img7298medium.jpg
http://img693.imageshack.us/img693/7652/img7296medium.jpg
Some of the extra parts (NGK brk7 sparkplugs, Moog front lower ball joints for both sides, Yamoto Garage RUCA custom powdercoated chrome black, rear subframe bushings)
http://img15.imageshack.us/img15/1794/img5789vu.jpg
The price is obo so shoot me a reasonable offer..
Make: Nissan
Model: 240sx
Color: Blue Emerald
Mileage: 121xxx
Transmission: Manual
Price: 9k obo..
Description: I'm getting tired of buying stuff for my car so I'm putting it up for sale.. It's a 96 240sx with around 121k miles.. Here is a list of stuff done to it.. It's a great daily and gets good gas mileage.. I'm think I'm done with cars for now.. I just started hitting boost a week ago and it runs strooonggg at 14lb's of boost... It's probably pushing between 350 and 400whp.. with the meth injection u can probably bump the boost up to around 23-24psi and get closer to 500whp..
Here is a list of stuff done to it..
Engine/drivetrain
Freshly rebuilt, around 3k miles, probably went through 8-10 oil changes so far...
Arias pistons 89.5mm 8.8:1, Fresh piston rings installed and the piston skirts coated
Eagle rods
King rod bearings
Clevite main bearings
Arp headstuds, main studs, rod bolts
Crank was polished and rotating assembly fully balanced..
3 angle valve job, new valve seals, cam cup things were shimmed properly so no ticking..
cylinder head and block are surfaced to use a Cometic gasket with no problem
Everything blue printed, block was honed, hot tanked, new freeze plugs, painted, etc..
New oil pump
Fel-pro head gasket
Precision 1000cc injectors
JGY fuel rail, powdercoated black..
Garrett GT35r dual bb turbo E style 3" cover with a .82 ar hot side t3 footprint
a custom built tubular equal length manifold with a t3 foot print
JGS 40mm wastegate
3.5" deep intercooler
300zx brakes in the front with drilled and slotted rotors
Spec stage 4 clutch
B&M short shifter
hks ssqv bov with recirculation fitting
Tanabe smr exhaust 3"
test pipe 3"
VLSD
Bikirom on a 95 OBD1 ecu tuned by romisburning..
Recently installed:
Snow performance stage 2 boost cooler for MAF sensors.. Installed with 625cc/min nozzle..
New walbro 255 relayed
Fuelabs FPR with -6 AN pushlock fittings
Apex'i air filter
Interior
Very clean IMO 9/10?
python 990 keyless, remotestart alarm
pioneer 6800dvd with indash 6 disk dvd
polk 4ch amp with polk speakers all around.
boost,oil press, water temp gauges mounted on the a pillar.
Apexi SAFC2 (maf needs to be wired in)
Apexi AVC-R
Relocated Battery - some nice yellow optima or something..
Plx m300 wideband o2 with a fairly new o2 sensor and an extra one..
Exterior 5/10 the front end needs to be repainted to match.. the front bumper has a few cracks, many small dings and a few dents
300zx turbo wheels (also comes with an extra set of turbo wheels and an extra front for a spare...)
AIT racing R33 style front bumper (real r33 gtr front lips should fit with a bit of finesse, AIT has the front lip for sale for $110)
8000k HIDs
LED tail lights
LED front turn signals (in progress, they will be clearcorners dual color style)
Possibly LED reverse lights if I ever get around to it..
carbon fiber hood
Tein coilovers
That's what is installed.. it will also come with
Energy suspension sub frame bushings (i think the current ones are shot)
second cylinder head
extra z32 maf
extra set of 300zx twin turbo wheels
various other parts i have that I can't think of right now..
Everything needed to pass nj inspection
97 engine wiring harness
Hell i might even give you stuff like an engine hoist and engine stand if you buy the car..
The bad:
Needs a new front lower ball joint (included for both sides)
Needs new rear subframe bushings (included)
Needs an alignment - project yamoto RUCAs and toe rods included, car still tracks straight, just too much camber in the rear..
Body work, lots of dings and dents from when i got the car.. I just put primer on the front fenders and will probably fix up the cracks and primer the front bumper.. Eventually paint them all gloss black or emerald blue.. There is some rust on the rear 1/4 panel by the wheel.. The trim around the sunroof looks sketchy but there are no leaks :)
Needs new tires in the rear.. I was going to get some drag radials...
some pictures..
before putting primer on the front fenders (the old paint looked ok in the picture but was TERRIBLE in person)
http://img199.imageshack.us/img199/874/img4791f.jpg
Engine apart being rebuilt
http://img260.imageshack.us/img260/20/img44222.jpg
Injectors cleaned and flow benched:
http://a.imageshack.us/img837/7711/img7261.jpg
http://img710.imageshack.us/img710/3332/img7306medium.jpg
http://img178.imageshack.us/img178/1035/img7305medium.jpg
http://img836.imageshack.us/img836/2818/img7303medium.jpg
http://img718.imageshack.us/img718/2587/img7302medium.jpg
http://img827.imageshack.us/img827/305/img7301medium.jpg
http://img842.imageshack.us/img842/4157/img7300medium.jpg
http://img829.imageshack.us/img829/6278/img7298medium.jpg
http://img693.imageshack.us/img693/7652/img7296medium.jpg
Some of the extra parts (NGK brk7 sparkplugs, Moog front lower ball joints for both sides, Yamoto Garage RUCA custom powdercoated chrome black, rear subframe bushings)
http://img15.imageshack.us/img15/1794/img5789vu.jpg
The price is obo so shoot me a reasonable offer..