FS / Partout: VQ30det 1995 s14 240sx Shell / Dropout / Rays / Turbonetics / Holset

[xxtokesxx]

Year, Make and Model of Car? ; 1995 Nissan 240sx Clean Title
Mileage? ; I believe 140k on Chassis - Have to check Odometer
Price ; Check Thread Below for Details
What is your name? : Ameen
What is your Email Address? : xxtokesxx at netscape dot net
What is your Phone number/AIM Screenname? : Five 1 Three 3 Two Eight 3 Five 6 Five
What is your City? : Cincinnati
What is your State? : Ohio
What is your Zip code? : 45227

~~ Partout of 1995 240sx Turbo - VQ30DET Project ~~
It's all for sale... I want it Ghandi...

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/IMG00103.jpg

About the Car...
The story was, I bought the blueish/green shell w/ no rust problems a while ago that was in need of a few things because I LOVED the color (how it changed in the sun). The car came with nothing, and as you all know this color had the crappy green interior, so I replaced everything. The car had no front so I bought a new one (Hood, Fenders, Bumper, Support, etc.) from my friend Matt. I bought all new hard brake lines, I replaced the entire interior with a black interior from a 1995 SE model, replaced the rear subframe, installed new suspension front and rear, converted it to 5 lug with q45 hubs and axle and a z32 axle, a q45 rear end, Seats and New Brackets from Corbeau, Exhaust, etc. Got a fresh hx40 and removed the hot side and get a T4 Turbonetics housing coated and machined to fit the larger wheel. It's got a Fresh 350z Transmission from 2004 z33 350z custom mounted and a shortened shaft for the conversion. it also has a VERY rare Vq30det from a Nissan Cima Mounted in the car as well. You can't find this motor every day and its rare... The car comes with a y33 ECU, a obdII maxima engine harness, etc. I got bored and found some 350z track wheels and I've got a few extra tires (not too much tread) to include. The car did not sell as a whole so I'm parting it out...

I would love to sell everything included together but check prices below ... Otherwise the Entire list of what is for sale is itemized below. If the shell doesn't sell within the next month or so I will part it out piece by piece

http://i49.photobucket.com/albums/f254/xxtokesxx/Random/African%20American%20Smileys/BuckTeeth.jpg


1995 240sx w/ Extras; Clean Title - Itemized Deduction for my Lowballers!!!
$4500 w/ Everything; Entire Project Included w/ Swap Car as Sits
$3500 ^ Minus Turbo Parts
$2500 ^ Minus VQ Dropout, z33 Trans, and Custom Crossmember & Trans Mounts
$1900 ^ Minus Corbeau Seats
$1400 ^ Minus Wheels / Bring your own Wheels
$1200 ^ Minus Rest of Interior
$1000 ^ Minus Rear End and Axles
Otherwise Car comes with Suspension, 5 lug conversion, Drilled Rotors, Some Cheap 3" Stainless Exhaust I don't remember, new hard brake lines, etc. If you have any questions... ask here!


VQ30DET Dropout:
$1600 w/ Stock Turbo Setup, $1200 for long block
Type: V-6 DOHC - 24 valve (4 valves/cyl)
Bore × stroke: 93.00mm × 73.30mm (Bore/Stroke ratio 1.27)
Displacement: 2987cc (182.278 cu in)
Unitary capacity: 497.83 cc/cylinder
Compression Ratio: 9.00:1
Fuel system: EFi
Aspiration: Turbo Intercooled
Max. Output: (JIS) 269.7 PS (266.0 bhp) (198.4 kW) @6000 rpm
Max. Torque: (JIS) 368.0 Nm (271 lbft) (37.5 kgm) @3600 rpm



Modifications:

Turbo Specifications: Holset HX40 (HX40-b8554m)
$950 for Complete Turbo w/ Modifications
-- Compressor: ____ A/R, 54.8 Trim, Standard 8 Blade wheel in a housing
-- Comp. Wheel Measurements: Inducer 56.6mm Exducer 74.7mm
-- Turbine: __A/R, __ trim w/ _____ turbine wheel in T4 Divided 19cm^2 Housing
-- Turb. Wheel Measurements: Inducer 76mm Exducer 64mm
-- Journal Bearing Center Housing Rotating Assembly (C.H.R.A.)
-- Compressor Flow: 60 lb/min

Turbo Modifications
-- Turbonetics T4 0.70AR Housing (Thermocoated); Ind=75.5mm, Exd=62mm Included with above Turbo Purchase
-- Custom Exhaust Manifolds, Vband Clamps, 2.25" Pipe, Flex Pipes everttgubg Stainless (need to be welded) $300 obo
-- Tial 44mm External Wastegate vf44 Brand New$350 obo

Engine, Drivetrain & Transmission, Cooling Mods
-- Y33 VQ30DET from a Nissan Cima/Cedric See above for Price
-- Z33 350z 6-Speed Transmission $1000
-- 1991 Infinit Q45 Rear VLSD Differential (R200) [3.54 final gear] $125
-- JWT Lightweight Flywheel w/ Removable Face (#lb)$250

Brakes, Wheels, & Suspension:
-- Z32 300zx Master Cylinder $100
-- Rays Engineering Forged '03 350z "Track" Wheels: F 18x8 +30, R 18x8.5 +33 $800 w/ 35% tread tires & extra set below
-- Bridgestone Potenzas: F 225/45/18, R 245/45/18 (And extra Set of Tires) Come's with wheel purchase
-- Tokico Struts & Skunk 2 Springs Comes w/ Shell now
-- Machined Rotors Comes w/ Shell for now

Electronics & Data Logging
-- Stock VQ30DET ECU & Maxima A32 Engine Harness$85 for ECU; $75 for Harness

Appearance & Cosmetics:
-- Corbeau CR1 Racing Seats $600
-- Corbeau Brackets Brand New$185

That's all the information I have... if you have questions ask here and I will do whatever I can to answer them. Thanks for looking... Now buy my car dammit!

Meeners.


Pictures!!!

1.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/030.jpg

2.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/240sxBuild006.jpg

3.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor005.jpg

4.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor007.jpg

5.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/014.jpg

6.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/IMG00115.jpg

7.
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/IMG00116.jpg

[xxtokesxx]

Continued... Mod's please advise... I'm just adding this additional post for the pictures. Thanks.

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor017.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor008.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor013.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/NewMotor017.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/Vq30detprelim1.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild023.jpg

Test fItting w/ B on his car
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild022.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild025.jpg

http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild125.jpg

Fixing Previous owners MIstakes
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild105.jpg

Getting rid of The Crappy Green Interior
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/VQBuild093.jpg

In the middle of swapping Subframes and suspension
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/240sxbuildson021.jpg

Fresh Black interior
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/031.jpg

Bad pic of the Corbeaus and brackets/sliders all dusty
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/025.jpg

Motor finally Mounted
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/018.jpg

Carpet and all
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/005.jpg

Clamps and all Stainless Pipes for my manifolds
http://i49.photobucket.com/albums/f254/xxtokesxx/1995%20240sx%20Base/VQ%20Project%20Pictures/028.jpg

[xxtokesxx]

Rear differential and axles sold... Master cylinder pending.

[xxtokesxx]

I will be pulling the entire interior as a whole, removing the suspension, and motor/set, and converting the shell to a stocker here very soon. Everything is for sale. At the moment I'm selling the interior as a whole since its in very good condition for $350 before pieces are parted from it. Thanks for you time guys.

[driftrkp]

Front 5 lug? i can include s13 4 lug and wheels if needed

[xxtokesxx]

Front 5 lug? i can include s13 4 lug and wheels if needed

Next week the car will go to the junker and I'm stripping it... I can do 125 Shipped for the front hubs if you are interested.

[s14savyChawlay]

Hey if you decide to sale parts of the interior separately I am very interested in your radio bezel. Plz let me know if your gonna sell it and how much. Thanks

[Tempnix]

trade the whole thing for my bike?

[xxtokesxx]

I already have a bike... Thanks though.

s14 savy... I will be pulling the motor and all the pieces next week. at that point I will be able to tear the car apart. I will post prices soon.

[Alty94]

How much for the rolling shell ? Would prefer with interior (if you haven't parted it out yet)

[Alty94]

Also do you still have the stock cross member in the car or available if I were to buy the shell ?

[xxtokesxx]

The shell with interior rolling I can let go for 1200...

Car comes with Suspension, 5 lug conversion, New interior aside from front seats, Drilled Rotors, Some Cheap 3" Stainless Exhaust, you just have to bring some wheels because the wheels are not included.

If you want the wheels or the corbeaus included the price goes to $1775. If you want anything else just let me know.

[thrwnsprkz]

My buddy is interested in speaking to you about the car. How can he reach you?

[Sergio180sx]

are those seats 600 shipped??

[xxtokesxx]

My buddy is interested in speaking to you about the car. How can he reach you?

Just tell him to PM me on here or pm me for my phone number... or just ask your questions here and I will answer them here as well.

are those seats 600 shipped??

No... All prices are plus shipping.

Getting my engine hoist tomorrow and the part out is starting... people that are wanting the whole shell will need to get with me sooner than later because the s14 vultures are circling already... and I don't plan on holding out as I need to get rid of this car by mid November. If I don't have any serious inquiries for the rolling car the suspension is being pulled this week. Car will be gone whether its rolling or not by mid next month.

[driftrkp]

pm me ill take the front 5 lug im just south of dayton i will pick up

[xxtokesxx]

Front Suspension is pulled, 5 lug drilled rotors, brakes, fenders, front bumper, bumper support off the car... 5 lug setp up front is next to go, then rear suspension, brakes, rotors, 5 lug hubs, and radiator support is already removable.

If you want the shell as a whole you might want to let me know by the end of the week, otherwise its on.

Motor trans is coming out this weekend because it was too dark. Whole interior is getting pulled either Thursday or Sunday. If the whole interior isn't sold as a whole by next week or so its getting parted individually.

If car isn't spoken for by two weeks from now, trunklid, lights, trunk carpet, etc are coming off. Subframes, suspension arms, and removable metal will be last to go here in 3 weeks if nobody wants the roller. Then doors and glass and moldings the week after if I get antsy...

Ain't fucking around, let's go! :)

I'm available before 8 on Thursday and after 10 possibly... Should be available Saturday evening and Sunday when football isn't being Played...

[slow_sr20]

trunklid wingless??? also interested in drivers side switches (for locks and windows) let me know. willing to pick up parts.

[xxtokesxx]

Trunklid is Wingless $65 obo
Window Switches are $40 obo

I'll try and come up with a list of all the parts here soon.

[xxom7gxx]

When will you be free to pick up the shell?

[xxtokesxx]

As soon as This Friday, but you might want to lock that in soon because the 240sx vultures are preying...

[xxom7gxx]

As soon as This Friday, but you might want to lock that in soon because the 240sx vultures are preying...

lol dont part nothing out of it

[xxtokesxx]

lol dont part nothing out of it
My friend... its tough times. If people show up to my door with money, I'm not going to tell them to go home lol. If you are seriously interested, and can come soon, that's a different story.

[xxom7gxx]

My friend... its tough times. If people show up to my door with money, I'm not going to tell them to go home lol. If you are seriously interested, and can come soon, that's a different story.

Im not sure i can get there friday but i will put money down on it to hold it one more week if it comes down to that..
Like you said times are hard and im not going to put down work if i dont have to

i got to find me some wheels, 5*114 right? and i will take them fornt seats if u wanna let them go with the car for 1500 :)

And does it have any rust? on the body
You have the headlights and fogs etc? are the coner lights clear?

Was is an 1995 240sx sr? can i get the numbers off the body to check the vin

Thanks for your time

[xxtokesxx]

Im not sure i can get there friday but i will put money down on it to hold it one more week if it comes down to that..
Like you said times are hard and im not going to put down work if i dont have to

i got to find me some wheels, 5*114 right? and i will take them fornt seats if u wanna let them go with the car for 1500 :)

And does it have any rust? on the body
You have the headlights and fogs etc? are the coner lights clear?

Was is an 1995 240sx sr? can i get the numbers off the body to check the vin

Thanks for your time

Okay... What exactly do you want with the shell? Just be descriptive and I can do it. I don't hold things for people unfortunately, because I've gotten burned many many times... its essentially first come first serve, but it doesn't look like its going anywhere. People are wanting parts though.

It doesn't have any rust problems. It has some surface rust on the new plates we welded in where the previous owner tried to "cut" in some holes for intercooler piping as it was an RB25 car. We patched them with sheet metal and it was exposed... nothing a quick buff wouldn't remove as its brand new metal. The rest has been painted to cover.

I don't know what exact lug measurements are... its the same as any modern and mid 90's 5 lug z or s chassis car.

can't throw the seats in for 1500, unless you want a shell that's only glass and steel, body, no interior... I do have the headlights and corners, no fogs. The corners are clear. The driver side corner has a crack as I bought them seperate. Corners are cheap though.

The car was not an SE, it was converted 5 lug and has an SE interior placed in it. I can give you the vin if you need it though.

No problem... any other questions just let me know.

[xxom7gxx]

Okay... What exactly do you want with the shell? Just be descriptive and I can do it. I don't hold things for people unfortunately, because I've gotten burned many many times... its essentially first come first serve, but it doesn't look like its going anywhere. People are wanting parts though.

It doesn't have any rust problems. It has some surface rust on the new plates we welded in where the previous owner tried to "cut" in some holes for intercooler piping as it was an RB25 car. We patched them with sheet metal and it was exposed... nothing a quick buff wouldn't remove as its brand new metal. The rest has been painted to cover.

I don't know what exact lug measurements are... its the same as any modern and mid 90's 5 lug z or s chassis car.

can't throw the seats in for 1500, unless you want a shell that's only glass and steel, body, no interior... I do have the headlights and corners, no fogs. The corners are clear. The driver side corner has a crack as I bought them seperate. Corners are cheap though.

The car was not an SE, it was converted 5 lug and has an SE interior placed in it. I can give you the vin if you need it though.

No problem... any other questions just let me know.

Can you get them numbers for me? im trying to get aday off so i can pick up this week. and i would need the interior so i guess i cant do the seats lol

But jw, what are you asking for the body with seats? are they Black Leather? or Cloth

[xxtokesxx]

Sorry, Interior is GONE as of this weekend. Guy came to pick it up... So if you aren't interested in the body without interior I understand. If you are let me know asap, otherwise I will start pulling. The motor and trans were pulled yesterday and I plan on going further if there is no more interest.

Full interior gone
z32 MC sold
Driver switch Sold

hood fenders, lights, motor, and transmission pulled.

Suspension getting pulled today

If no interest in the shell trunklid getting pulled soon, and also doors w/ glass and harnesses will be pulled very soon.

Any other questions feel free to ask here.

[xxom7gxx]

ok well how much for the trunklid

[xxtokesxx]

Trunklid sold last week for $60... It's been picked up already... lots of stuff still available.

[gamble-did-it]

How much for the wheels shipped to 32210?

[xxtokesxx]

How much for the wheels shipped to 32210?
Wheels SOLD last week for $685, I will update the list here and post up... I apologize.

[xxtokesxx]

People keep asking... the car as a roller with Suspension, 5 lug conversion, Drilled Rotors will be $1000 firm. You will have to bring your own wheels. It has the interior harness intact. The engine harness that I got with it I didn't use. I don't know how true that is, but its included. I can throw in the steering wheel so you can steer it as well. Just feel free to ask here as my PM's fill up fast.

THanks guys.