Pirate_Freder
09-06-2010, 01:39 PM
http://prosportgauges.com/images/products/detail/DigitalOilPress600size.jpg
I have a nice set of brand new in boxes Prosport Digital 52mm Gauges and installation accessories that I don't see myself using anytime soon so I figure I could better use the cash for now. All gauges are smoked lens and include sensors(except A/F), mounting hardware, and hood.
This is what Prosport sells this stuff for, make offers.
Digital Gauges-Digital Boost gauges-Prosport Gauges, EGT, Water temp, etc.. (http://prosportgauges.com/52mm_digital_series_gauges.aspx)
Oil filter adaptor plate, radiator hose adaptors, senders, mounting gcups (http://prosportgauges.com/installation_mounting_items.aspx)
- Pending payment!!!Oil pressure $73.99 Pending payment!!!
- SOLD!!! Oil temperature $55.75 SOLD!!!
- Water temperature $55.75
- Pending payment!!!Air/Fuel and voltage(wideband or narrowband switchable, wide requires controller such as innovate makes) $65.50 Pending payment!!!
- 3/4-16(Nissan etc.) Oil sandwich plate with sensor ports $35.00
- 34mm(Nissan etc.) in hose water temp sensor adapter $26.00
All together it's about $330 shipped from Prosport. I am willing to sell individualy or as a package.
I also have a DIN 3 52mm gauge holder and a 240SX center vent 2 52mm gauge holder with vent, if you buy everything at a reasonable price I will throw these in for free; otherwise they are $15 shipped each. DIN 3 52mm SOLD!!! Center vent 2 52mm Pending payment!!!
Center vent gauge holder(not my pic) Pending payment!!!
http://i26.photobucket.com/albums/c148/Pirate_Freder/Vent2.jpg
I also no longer need my NGK spark plug wires. They only have a couple thousand miles on them and are in great condition minus the coil wire. The coil wire just needs a new connection on one end cause my msd connector was on there and I needed it for my new wires, maybe on the other too cause it turned yellow from resistance heating(bad connection to the distributor cap) but it was working fine when I took them off. If you have an S14 KA with an internal coil than you don't need it. I will take pics tomorrow. They retail for about $75 or $65 for the s14 ones without the coil wire. I'm just asking $45 shipped.
(not my pic)just an example of how they look installed
http://i26.photobucket.com/albums/c148/Pirate_Freder/2eehm5i.jpg
Actual wire set
http://i26.photobucket.com/albums/c148/Pirate_Freder/def3a23f.jpg
The end where the MSD connector was
http://i26.photobucket.com/albums/c148/Pirate_Freder/e8c07e7b.jpg
The yellowing from resistance heating
http://i26.photobucket.com/albums/c148/Pirate_Freder/0c1b1230.jpg
Fred
503-550-9410 text or call
Of course PM too but my phone is faster.
I have a nice set of brand new in boxes Prosport Digital 52mm Gauges and installation accessories that I don't see myself using anytime soon so I figure I could better use the cash for now. All gauges are smoked lens and include sensors(except A/F), mounting hardware, and hood.
This is what Prosport sells this stuff for, make offers.
Digital Gauges-Digital Boost gauges-Prosport Gauges, EGT, Water temp, etc.. (http://prosportgauges.com/52mm_digital_series_gauges.aspx)
Oil filter adaptor plate, radiator hose adaptors, senders, mounting gcups (http://prosportgauges.com/installation_mounting_items.aspx)
- Pending payment!!!Oil pressure $73.99 Pending payment!!!
- SOLD!!! Oil temperature $55.75 SOLD!!!
- Water temperature $55.75
- Pending payment!!!Air/Fuel and voltage(wideband or narrowband switchable, wide requires controller such as innovate makes) $65.50 Pending payment!!!
- 3/4-16(Nissan etc.) Oil sandwich plate with sensor ports $35.00
- 34mm(Nissan etc.) in hose water temp sensor adapter $26.00
All together it's about $330 shipped from Prosport. I am willing to sell individualy or as a package.
I also have a DIN 3 52mm gauge holder and a 240SX center vent 2 52mm gauge holder with vent, if you buy everything at a reasonable price I will throw these in for free; otherwise they are $15 shipped each. DIN 3 52mm SOLD!!! Center vent 2 52mm Pending payment!!!
Center vent gauge holder(not my pic) Pending payment!!!
http://i26.photobucket.com/albums/c148/Pirate_Freder/Vent2.jpg
I also no longer need my NGK spark plug wires. They only have a couple thousand miles on them and are in great condition minus the coil wire. The coil wire just needs a new connection on one end cause my msd connector was on there and I needed it for my new wires, maybe on the other too cause it turned yellow from resistance heating(bad connection to the distributor cap) but it was working fine when I took them off. If you have an S14 KA with an internal coil than you don't need it. I will take pics tomorrow. They retail for about $75 or $65 for the s14 ones without the coil wire. I'm just asking $45 shipped.
(not my pic)just an example of how they look installed
http://i26.photobucket.com/albums/c148/Pirate_Freder/2eehm5i.jpg
Actual wire set
http://i26.photobucket.com/albums/c148/Pirate_Freder/def3a23f.jpg
The end where the MSD connector was
http://i26.photobucket.com/albums/c148/Pirate_Freder/e8c07e7b.jpg
The yellowing from resistance heating
http://i26.photobucket.com/albums/c148/Pirate_Freder/0c1b1230.jpg
Fred
503-550-9410 text or call
Of course PM too but my phone is faster.