TheRealNighthog
08-31-2010, 06:38 PM
http://img.photobucket.com/albums/v338/91sentra01/Mobile%20Uploads/SNC00140.jpg
Top feed rail. Designed for highport. Had the fitting for the stock fpr drilled and tapped for a fitting for an external regulator. Might want to weld up the holes on the sides of that tapped fitting. -30 shipped, with 8AN fittings its 40 shipped
Copper 2.5 from Mr. Gasket for stock J pipes. 12 shipped. All you have to do is bore out the holes for the studs.
VE stainless exhaust gasket (will also fit DE and DET) 22 shipped
T3 oil return flange with 10AN fitting installed. -25 shipped
Top feed rail. Designed for highport. Had the fitting for the stock fpr drilled and tapped for a fitting for an external regulator. Might want to weld up the holes on the sides of that tapped fitting. -30 shipped, with 8AN fittings its 40 shipped
Copper 2.5 from Mr. Gasket for stock J pipes. 12 shipped. All you have to do is bore out the holes for the studs.
VE stainless exhaust gasket (will also fit DE and DET) 22 shipped
T3 oil return flange with 10AN fitting installed. -25 shipped