flipdrifter
08-31-2010, 03:10 PM
Prices are not final will take reasonable offers
----------------------PICS FROM BUILD THREAD---------------------------
http://www.northwestnissans.com/boar...ad.php?t=80793
Time to let the project car go!!! Ive been working on this car for about 3-4 years now and haven't touched if for about a year, I don't have the time, money, nor the determination to finish it.
---I have special plans for the motor and trans so those are not for sale---
I'm selling the car as a rolling chassis, which means all stock suspension unless you would like me to leave somethings on.
-Ken from twisted fab made the cage to my standards wile following all the rules from Fd rule book. I had him build a cage that gave me the most room in the driver seat. I wanted a cage that would serve its purpose but give me the room as if it wasn't there, which he accomplished.
The chassis is also seam welded at all the major uni-body parts. Has tubed front fenders with new undercoating. Also has a rear firewall for a fuel cell set up. It also has a v-mount set up that will run a koyo radiator and will also come with a mock up intercooler.
Dash it already cut and fitted for the cage. Front chassis harness is basically done, a few wires need to be extended. I wired it so the fuse box nor the relay box is in the engine bay so the only wiring you'll see is the engine harness. The inner harness would probably have to be redone because i started it and have no idea where i left off, i was going to run painless harness anyway. Has a 180sx steering column that's not spring loaded with a metal steering bushing. Has 180sx front brakes as well.
That's if for the chassis, I'm probably forgetting something but I'm asking $2000 or a reasonable offer for the rolling chassis.
Everything else is being parted out
-suspension-
JIC front tension rods $200
JIC front inner tie rods $150 (SOLD)
JIC rear toe rods $200
JIC rear upper control arms (SOLD)
JIC rear traction rods $100 (one rod is a little bent from being rolled around on no suspension)
Unknown brand rear drag bar $50
Du-luck ladder bar $120
Tanabe front sway bar $120
Tanabe rear sway bar $120
JIC rear stabilizer sway bar adjuster $150
Nagisa Auto Shakitto Plate $150
Nagisa Auto fender braces $150
Kazama rear sub-frame collars (SOLD)
Nismo Front power brace (SOLD)
Cusco Front power brace $100
-DRIVETRAN -
Cusco-RS 2 way LSD (taking offers)
-INTERIOR-
STATUS red seat (taking offers)
Driver side sliders and rails $80
Nardi steering wheel hub $60
Greddy Info meter (needs harness) $50
-EXTERIOR-
Silvia conversion
-Brick lights, tabs are broken but still work (SOLD)
-Light brackets $20
D-max FRP vented hood for silvia (Brand NEW) payed $700 shipped selling for $600
D-max 40mm silvia fenders (Brand NEW) payed $480 shipped selling for $350
Version select V1 kit
Front bumper (Used no cracks perfect condition) $250
Side skirts (Brand NEW) $200
Rear Bumper $200
B-Magic rear 50mm over-fenders (Brand New) $200
Flex-A-Lite FAL-220 Dual 12 inch Puller Auto Electric Fans 2500CFM
(brand new) $250
project nissan sr20 downpipe $50
WILL SHIT AT YOUR OWN EXPANSE. IF YOU HAVE ANY QUESTION OR ARE INTERESTED IN BUYING ANYTHING PLEASE CONTACT ME VIA PM, EMAIL [email protected]
I moving the end of September, need everything gone!!!
Prices are not final will take reasonable offers
-----------------------PICS FROM BUILD THREAD--------------------------
http://www.northwestnissans.com/boar...ad.php?t=80793
----------------------PICS FROM BUILD THREAD---------------------------
http://www.northwestnissans.com/boar...ad.php?t=80793
Time to let the project car go!!! Ive been working on this car for about 3-4 years now and haven't touched if for about a year, I don't have the time, money, nor the determination to finish it.
---I have special plans for the motor and trans so those are not for sale---
I'm selling the car as a rolling chassis, which means all stock suspension unless you would like me to leave somethings on.
-Ken from twisted fab made the cage to my standards wile following all the rules from Fd rule book. I had him build a cage that gave me the most room in the driver seat. I wanted a cage that would serve its purpose but give me the room as if it wasn't there, which he accomplished.
The chassis is also seam welded at all the major uni-body parts. Has tubed front fenders with new undercoating. Also has a rear firewall for a fuel cell set up. It also has a v-mount set up that will run a koyo radiator and will also come with a mock up intercooler.
Dash it already cut and fitted for the cage. Front chassis harness is basically done, a few wires need to be extended. I wired it so the fuse box nor the relay box is in the engine bay so the only wiring you'll see is the engine harness. The inner harness would probably have to be redone because i started it and have no idea where i left off, i was going to run painless harness anyway. Has a 180sx steering column that's not spring loaded with a metal steering bushing. Has 180sx front brakes as well.
That's if for the chassis, I'm probably forgetting something but I'm asking $2000 or a reasonable offer for the rolling chassis.
Everything else is being parted out
-suspension-
JIC front tension rods $200
JIC front inner tie rods $150 (SOLD)
JIC rear toe rods $200
JIC rear upper control arms (SOLD)
JIC rear traction rods $100 (one rod is a little bent from being rolled around on no suspension)
Unknown brand rear drag bar $50
Du-luck ladder bar $120
Tanabe front sway bar $120
Tanabe rear sway bar $120
JIC rear stabilizer sway bar adjuster $150
Nagisa Auto Shakitto Plate $150
Nagisa Auto fender braces $150
Kazama rear sub-frame collars (SOLD)
Nismo Front power brace (SOLD)
Cusco Front power brace $100
-DRIVETRAN -
Cusco-RS 2 way LSD (taking offers)
-INTERIOR-
STATUS red seat (taking offers)
Driver side sliders and rails $80
Nardi steering wheel hub $60
Greddy Info meter (needs harness) $50
-EXTERIOR-
Silvia conversion
-Brick lights, tabs are broken but still work (SOLD)
-Light brackets $20
D-max FRP vented hood for silvia (Brand NEW) payed $700 shipped selling for $600
D-max 40mm silvia fenders (Brand NEW) payed $480 shipped selling for $350
Version select V1 kit
Front bumper (Used no cracks perfect condition) $250
Side skirts (Brand NEW) $200
Rear Bumper $200
B-Magic rear 50mm over-fenders (Brand New) $200
Flex-A-Lite FAL-220 Dual 12 inch Puller Auto Electric Fans 2500CFM
(brand new) $250
project nissan sr20 downpipe $50
WILL SHIT AT YOUR OWN EXPANSE. IF YOU HAVE ANY QUESTION OR ARE INTERESTED IN BUYING ANYTHING PLEASE CONTACT ME VIA PM, EMAIL [email protected]
I moving the end of September, need everything gone!!!
Prices are not final will take reasonable offers
-----------------------PICS FROM BUILD THREAD--------------------------
http://www.northwestnissans.com/boar...ad.php?t=80793