shifter shaking problems!!!

[T3X_S13]

Well i searched and couldnt really find anything similiar,well my shifter has been shaking really bad when i take off threw 1st and 2nd gear,i thought my transmission mount was going out so i changed it out and it didnt make a differance,my motor mounts are still good,i jacked up the car and everything seemed good,it only does it in low rpms?Thanks

[sil80 monster]

after market shifter?

[RZRSHARP_240SX]

i am thinking it could be wheel hop I'm not 100% sure on that.. i expirence the shifter shake in my car all the time on hard launches.

[T3X_S13]

Stock shifter and it shakes on jus a regular take off no hard take offs

[sil80d]

try changing you trans mount and the shifter bushing

[dfitzg]

its more than likely the shifter bushing i just finally changed mine after 2 years of shaking and rattling

[consouler]

I was having the same issue, and later found out that the bushing on my drive shaft was done creating a vibration on the shifter

[240sx123$]

Yup, shifter bushing. I have a couple stock shifters laying around, if you want one, pm me.

[T3X_S13]

I aready changed out my tranny mount,I never changed out the shifter bushing any good write ups around or tips on how to?

[240sx123$]

Unbolt the six or eight 12mm bolts on top of the shifter. Remove shifter. Bushing is on the end of the shifter. Pull it off. Reinstall.

[stinky_180]

You might as well change it to a solid bushing:

http://i1.frsimg.com/images/detailed_images/Untitled-112686876224b9ea306a9715.jpg (http://www.frsport.com/Circuit-Sports-CS-SS-NS240B-Solid-Shifter-Collar-Bushing-240sx-S13-14_p_16355.html)

[T3X_S13]

Okay thanks guys for the help!

[!Zar!]

Yeah, go with a metal shifter bushing for sure. Cusco makes one.

[blue rexsti]

i have shaking on my isis shifter. The weight that is put on the shifter itself vibrates because it has like 1/4mm of gap between the lockrings on the top and bottom. I believe you can ziptie the black rubber shift boot below the weight.