PDA

View Full Version : FL GT2871r .64 Ball Bearing turbo

KoukiMonsta
08-23-2010, 12:27 PM
I really need some money so this has to go, was planing to use it for sr rebuild.

Very little shaft play, it was run for about 1500 miles on 7psi. comes with a stock actuator, i think i have an hks around too for extra.

750$ +shipping OBO, i will ignore absurd lowballs

http://i106.photobucket.com/albums/m249/kitefl/IMG_4277.jpg
http://i106.photobucket.com/albums/m249/kitefl/IMG_4278.jpg
http://i106.photobucket.com/albums/m249/kitefl/IMG_4283.jpg
KoukiMonsta
08-25-2010, 01:46 PM
to the top
TurboStrong
08-25-2010, 01:52 PM
Nice Turbo man, how much hp is this bad boy rated at?
s14fbs
08-25-2010, 04:38 PM
buy this turbo so he can buy my wheels so i can get new wheels

rawr
Blacklines86
08-25-2010, 06:32 PM
I dont see how a turbo ran for 1500 miles at stock pressure has "very little" shaft play. I would expect it to have zero shaft play.
s14fbs
08-25-2010, 06:36 PM
I dont see how a turbo ran for 1500 miles at stock pressure has "very little" shaft play. I would expect it to have zero shaft play.

my turbonetics turbo had shaft-play out the box once i ran it for 2500 miles it was gone so it probably not fully broken in yet

but i can vouch for the 1500 miles on stock boost
Def
08-25-2010, 06:46 PM
I dont see how a turbo ran for 1500 miles at stock pressure has "very little" shaft play. I would expect it to have zero shaft play.

All turbos have shaft play. If there is zero clearance they cannot function like a hydrodynamic bearing and will wear to nothing quickly at the speeds turbos spin(150k RPM sometimes).

Axial(in and out) shaft play is bad, radial shaft play should be a few thousandths of an inch(basically just enough to feel with your fingers, and a light clicking sound as you move it back and forth).
Blacklines86
08-26-2010, 02:00 AM
All turbos have shaft play. If there is zero clearance they cannot function like a hydrodynamic bearing and will wear to nothing quickly at the speeds turbos spin(150k RPM sometimes).

Axial(in and out) shaft play is bad, radial shaft play should be a few thousandths of an inch(basically just enough to feel with your fingers, and a light clicking sound as you move it back and forth).

Thanks for the explanation.

Free bump, GLWS!!
KoukiMonsta
08-26-2010, 10:19 AM
Thanks DEF, Like posted i would be lieing if I said NO shaft play. there is just enough radial play to notice with your fingers as stated.


maybe if someone would buy this i could get those wheels man

and this turbo CAN make 400whp....now lets not get into that in this thread, there is a thread dedicated to the t2871r, CODYACE has done some col stuff with this turbo!!
devlmaycry
08-27-2010, 08:26 AM
You've got a PM!
KoukiMonsta
08-29-2010, 12:36 PM
brin git on up
KoukiMonsta
08-31-2010, 05:02 PM
no takers?
KoukiMonsta
09-04-2010, 12:27 PM
bummpers
m n
Ceepo
09-04-2010, 01:17 PM
I wish i could afford this man, GLWS, someone buy this!!!
racerx2k1
09-04-2010, 11:06 PM
to the top

Thanks DEF, Like posted i would be lieing if I said NO shaft play. there is just enough radial play to notice with your fingers as stated.


maybe if someone would buy this i could get those wheels man

and this turbo CAN make 400whp....now lets not get into that in this thread, there is a thread dedicated to the t2871r, CODYACE has done some col stuff with this turbo!!

brin git on up

no takers?

bummpers
m n

2 bump limit. You can start new thread in 3 days.