Greddy Breather Tank installed right?

[ghost_22_47]

I want to find out if my Greddy Breather Tank is installed right. Any help is appreciated. I already raised it some but I need to raise it a little higer.
This is the part that I think is wrong, is this supposed to be attached to the top of my coolant overflow tank or the bottom? because it's full of coolant but has nowhere to go because the bottom is blocked off.
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0ODUtMjAxMDA4MjAtMTgzNi5qcGc.jpg
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0ODctMjAxMDA4MjAtMTgzNy5qcGc.jpg
Here is where the hose that is attached to the top of the coolant overflow tank goes.
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0ODktMjAxMDA4MjAtMTgzNy5qcGc.jpg
Another blocked off tube but in the diagram from greddy it shows to either be blocked off or have a hose going to something written in Japanese ha ha ha
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0OTAtMjAxMDA4MjAtMTgzOC5qcGc.jpg
The other hose goes to the top of the radiator
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0OTEtMjAxMDA4MjAtMTgzOC5qcGc.jpg
The bottom of the tank goes to the lower radiator hose which is correct according to the diagrahm
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0OTMtMjAxMDA4MjAtMTgzOS5qcGc.jpg
http://i818.photobucket.com/albums/zz104/ghost_22_47/SU1HMDA0OTQtMjAxMDA4MjAtMTgzOS5qcGc.jpg

[japslapsilvia]

no it goes to the Bottom of the Resivor tank. Also the fitting on the Greddy tank that u have blocked off should go to where the bleed port is. Greddy includes a screw in nipple that will replace the bleed screw. And the tank needs to be higher...for it to work correctly it MUST be the highest part of the system...from the looks of ur current location its still lower then the heater hoses....

[S14DB]

Should have a bypass cap on the radiator not a pressure cap.