Clutch pedal?

[SR707DRIFT]

I was driving my car yesterday and everything was cool. But then my clutch pedal wouldn't come back up after pushing it down and I can't go into any gears. I checked the clutch fluid and it was very low so I filled it up and then everything was cool. But I looked at the slave cylinder and it was leaking when you press the clutch pedal. So I was driving and it leaked so much that it happened again. So I bought a new slave cylinder and installed it and put new fluid in it. I bled the system and still it won't come up after pushing the clutch pedal down. what's going on?

[BoxerJackJohnson]

You still have air in there somewhere. Are u running that damper thing that routes the hardline to the slave? if so the air is prolly trapped in there and you will have to either crack that line open during the bleeding process, or just remove it completely. via using the hardline to clutch line joiner thing.

[BoxerJackJohnson]

when i say hardline i mean master cylinder and clutch line is the slave line. Sorry didnt want to confuse u

[Charlie]

Clutch Line Modification - Removing Damper Loop - zeroyon.com (http://www.zeroyon.com/index/content/view/32/47/)

[BoxerJackJohnson]

Whoop there it is

[SR707DRIFT]

Sorry guys just figured it out. It was clutch pedal adjustment