Huge garage clean-out!

[cpa s13]

Alright its time to make some room in at least 1 garage.

-Z32 Brakes: One full set and another front pair.

Set of 4 has slotted Brembo rotors/Hawk pads. Pair has Greddy GREX pads/OEM R32 rotors. All brakes come with Lines/Rotors/Pads/Calipers.

Pictures coming Soon!




-S15 OEM Taillights. One has a half inch crack in the corner. $150

http://i875.photobucket.com/albums/ab275/carnoldracing/sell/IMG_0098.jpg




-10 RB20 coil packs. 2 have damaged plugs, one has a missing socket. Take em all for $75

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0254.jpg





-JDM Nismo AUTOMATIC shift knob. Picked it up from Up Garage in Yokohama. Be unique! Cant read it on the picture but the writing says NISMO. $50

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0258.jpg




-Summit catch can. Has 2 barb fittings, breather filter, and a drain on the bottom. Used for 1 track event. $30.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0260.jpg




-Scosche 1 farad capacitor. $20

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0261.jpg




-Hatch tails. They have a few small cracks. $15.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0262.jpg




-XS Power V-band turbo. Externally wastegated. No shaft play. .84 housing $300

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0264.jpg




R33 GTR wheel (needs re-wrap) $50

http://i875.photobucket.com/albums/ab275/carnoldracing/sell/IMG_0100.jpg




-Coupe Taillights. Small cracks/scratches. $15

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0267.jpg





-Full set of 4 lug hubs & rear dust covers. $30

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0269.jpg




-1 left 180sx type-X turn signal. $30.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0270.jpg




-2 JL Audio W12 v2 subs. Have a box available as well. These have never been used. $150

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0276.jpg




-S13 cruise control wheel, no chips/tears. $25

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0278.jpg




-Nismo CA18 flywheel (needs resurfacing) $50

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0279.jpg




-S13 SR20 lightweight crank pulley, used for less than a month. $40.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0285.jpg




-OEM T25 wastegate actuator, works perfectly $25.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0287.jpg




-ECU's

I have the following:

KA24E Auto
KA24E Manual
RB20DET Manual
Redtop SR20DET Manual
KA24DE OBDII Manual




-OEM S13 SR20 exhaust manifold. $25.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0291.jpg




-S14 struts/sportline springs. Front 2 are factory struts. Rears are KYB GR2s. In good condition. $200

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0292.jpg




-MOMO wheel with horn button. Wheel needs a re-wrap. Does not include quick release/hub! $40.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0293.jpg




-RB20 coilpack covers $15 each.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0296.jpg




-R32 door sills. Make em work on your 240 and have somethin different! $50

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0298.jpg




-Foam roll cage padding. Red. 10 pieces. $2 each.

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0301.jpg





-Brand new Energy Suspension subframe slip in bushings. $30

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0304.jpg



-R32 GTS-T seats. No rips, tears, stains etc. $250 a pair

http://i875.photobucket.com/albums/ab275/carnoldracing/IMG_0296.jpg




Apex EVCS. Needs pressure sensor. $200

http://i875.photobucket.com/albums/ab275/carnoldracing/sell/IMG_0347-1.jpg



Other stuff I don't have pictured includes:

-3 S13 subframes/arms
-1 USDM front cut
-Pop-ups
-Wiring (USDM, JDM, RB. SR, KA)
-SR parts of all kinds (OEM cams, injectors, valves, springs, reatiners, etc)
-Bumpers
-4 Point Harnesses
-Gauges (Autometer/VDO/Sunpro/more)

[bllabong89]

could you pm me with info on the harness and autometer gauges?

Andrew

[da_grey_s13]

pm me a price on the z32 front calipers shipped to 70461

[SupaDoopa]

Price of full set of Z32's to 02769 as well as front set.

[fender-startocaster]

How much for the rb20 engine harness? do you have the lower rb20 as well? and those skyline door sills are prety bad ass!

[hockeyrules]

how much would shipping be on the oe sr manifold along with the crankpulley to 85382

[TurboSE]

Sorry for the hassle, but could you post a full pic of the Skyline door sills? Maybe a pic of both for comparison? I'm very interested.

[da_grey_s13]

what the... i knew nothing of a nismo CA18DET flywheel. anyway, if you can throw that in a large flat rate USPS box ill give you 62 shipped

[bradass]

money sent for takata pads and foam wraps.

[MeowMR2]

Whats the Size on the XS turbo? whats the AR? T3 or T4 flange? BB or journal? more info please.

[240KAR]

you have any ignition coils for SR20det Redtop? how much shipped to 37367..

[zylvia213]

how much for the strut bar shipped to 90026? thanks

[cpa s13]

Sorry for the hassle, but could you post a full pic of the Skyline door sills? Maybe a pic of both for comparison? I'm very interested.

Sure, they are about 2 inches longer than S13s but they fit in the door still. I think with a little trim adhesive they could be made to fit without much issue.

I've never tried to fit them, they came off one of my R32s.


The R32 is on top, lower one is an OEM S13

http://i680.photobucket.com/albums/vv161/thegoalie300/sell/IMG_0357.jpg

I sat it in a hatch door sill just so you can get idea of how it would fit.

http://i680.photobucket.com/albums/vv161/thegoalie300/sell/IMG_0358.jpg




All PMs sent!

[sliptones629]

Any better pictures of the GREDDY knob? I am very interested. Thanks

[cpa s13]

Any better pictures of the GREDDY knob? I am very interested. Thanks

Shift Knob is SOLD

[240drift916]

Do you have the coil pack harness for the RB20?

[cpa s13]

Do you have the coil pack harness for the RB20?

No I don't

[ionion]

can i get a price on ka24de M/T ecu shipped to 91402

[cpa s13]

can i get a price on ka24de M/T ecu shipped to 91402

You have a PM sir

[bradass]

parts received! fast shipping...left you good feedback..thanks chris!! Bump!

[cpa s13]

parts received! fast shipping...left you good feedback..thanks chris!! Bump!

Thank you sir!

Glad you got the parts!

[nmullin11]

are injectors 480cc or 370???

pm me please

[shanes14]

are you willing to part the suspension? i want just the springs.

[Wookie384]

Do you have the metal plate that goes between the bellhousing and block?

[cpa s13]

are you willing to part the suspension? i want just the springs.

Possibly, PM me an offer for em.

[cpa s13]

Do you have the metal plate that goes between the bellhousing and block?

Like a bellhousing adaptor? For what motor?

[HPKMotorsports3]

the r32 seats bolt right into an s13 right? if so how much for the r32 seats to be shipped to 10033... i have a ups business acct for discount on shipping them... lmk