Magical Trevor
08-15-2010, 12:07 PM
So I'm moving on to something bigger and a lot more mean than the SR. Maybe RB, LSX... not really sure. Just want something with more power. I'm putting my red top SR20DET complete swap up for sale.
Here's the run down..
Red Top SR20DET:
Fresh rebuild with OEM pistons, rods and rings.
Rebuilt head with OEM seals, valves and springs.
Greddy RAS
Circuit Sports pulleys
Exhaust:
S14 SR T28 BB turbo
Megan turbo manifold
Megan elbow
Megan downpipe
Circuit Sports SS lines
Intake:
Custom FMIC kit with aluminum piping
OEM BOV
Greddy/Freddy intake manifold
Custom turbo intake
Electronics:
Here's what I have to offer, I have two separate upper and lower harnesses. One is setup for a Z32 MAF and one is setup for an Apexi PFC D-Jetro.
Wiring Specialties S13 SR - S14 Chassis upper and lower wiring harness. (Z32 MAF)
D-Unit S13 SR upper and lower wiring harness (PFC D-Jetro)
Apexi Power FC D-Jetro with commander.
PFC MAP sensor kit
PFC IAT kit
Either one of these harness can be converted for the PFC or the Z32 MAF. You choose which one you want. The Wiring Specialties harnesses will be priced accordingly because they are BRAND NEW and have virtually no run time on them.
If you choose the Z32 MAF harness I will include a Z32 MAF.
Cooling:
Custom upper coolant pipe for KA radiators
Lower coolant hose.
Heater core hoses (in and out)
http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture003.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture004.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture005.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture010.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture007.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture008.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture006.jpg
The only 2 flaws that I can pick out,
1. The valve cover is scratched and nicked... not sure how much that matters to some.
2. The CAS plug is cracked but still seals and "clicks" when the harness plug is plugged in.
At this point NOT I'm willing to part out anything off the engine. The only things I'm willing to part with are the FMIC kit, the Power FC and one of the harnesses. This way I can still sell the engine set with a harness and you can pick up your own FMIC (which are everywhere).
http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg
Yes I am willing to ship the engine/trans/etc
Probably more I'm leaving out. If you have any questions PM me.
$3500 obo
for everything!
I don't have to sell this as a whole, but I'm not going to part out small things like injectors and turbo lines. Make offers on things, worst case all I say is no.
Here's the run down..
Red Top SR20DET:
Fresh rebuild with OEM pistons, rods and rings.
Rebuilt head with OEM seals, valves and springs.
Greddy RAS
Circuit Sports pulleys
Exhaust:
S14 SR T28 BB turbo
Megan turbo manifold
Megan elbow
Megan downpipe
Circuit Sports SS lines
Intake:
Custom FMIC kit with aluminum piping
OEM BOV
Greddy/Freddy intake manifold
Custom turbo intake
Electronics:
Here's what I have to offer, I have two separate upper and lower harnesses. One is setup for a Z32 MAF and one is setup for an Apexi PFC D-Jetro.
Wiring Specialties S13 SR - S14 Chassis upper and lower wiring harness. (Z32 MAF)
D-Unit S13 SR upper and lower wiring harness (PFC D-Jetro)
Apexi Power FC D-Jetro with commander.
PFC MAP sensor kit
PFC IAT kit
Either one of these harness can be converted for the PFC or the Z32 MAF. You choose which one you want. The Wiring Specialties harnesses will be priced accordingly because they are BRAND NEW and have virtually no run time on them.
If you choose the Z32 MAF harness I will include a Z32 MAF.
Cooling:
Custom upper coolant pipe for KA radiators
Lower coolant hose.
Heater core hoses (in and out)
http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture003.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture004.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture005.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture010.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture007.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture008.jpg
http://i3.photobucket.com/albums/y63/krnhckr/Picture006.jpg
The only 2 flaws that I can pick out,
1. The valve cover is scratched and nicked... not sure how much that matters to some.
2. The CAS plug is cracked but still seals and "clicks" when the harness plug is plugged in.
At this point NOT I'm willing to part out anything off the engine. The only things I'm willing to part with are the FMIC kit, the Power FC and one of the harnesses. This way I can still sell the engine set with a harness and you can pick up your own FMIC (which are everywhere).
http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg
Yes I am willing to ship the engine/trans/etc
Probably more I'm leaving out. If you have any questions PM me.
$3500 obo
for everything!
I don't have to sell this as a whole, but I'm not going to part out small things like injectors and turbo lines. Make offers on things, worst case all I say is no.