mishimoto
08-13-2010, 09:55 AM
We have decided to put our 1991 RHD JSPEC Nissan S13 up for sale.
First, a little about the car
-The goal in building this car was to build a true JDM drift machine capable of 600+ hp, and at the same time showing the true passion that Mishimoto has for the industry. The S13 was sent over from Japan to be built specifically for Mishimoto. Throughout the build no expenses were spared, everything from body work to interior and engine parts were upgraded. The project and the work was done at TurboChargers.com in Houston, Texas. The entire project took approximately 7 months to complete.
The car has never been driven on the street, and has a only 3 dyno pulls on the motor. All parts are basically still brand new, tires have 100% tread life left.
Modifications:
Engine:
SR20DET Engine
BC Stroker Kit
BC Springs
BC Retainers
APEX Head Gaskets
ARP Head Studs
Total Seal Rings
Clevitte Bearings
Turbonetics GTK-650 Turbo
Artisan Intake Manifold
Artisan throttle body
Artisan Manual boost controller
Turbonetics Godzilla BOV
Turbonetics Waste gate
Tomei Solid lifters
Turbonetics-66mm turbo
Artisan Tubular Manifold
Artisan Intake Manifold
Deatchwerks 810cc Injectors
Mishimoto Radiator hoses
Mishimoto Custom Radiator overflow
Mishimoto Intercooler
Mishimoto Intercooler Piping
Mishimoto Radiator
Mishimoto transmission cooler
Mishimoto Oil Cooler
Mishimoto Fan Shroud and Fans
Mishimoto Oil Catch Can
Mishimoto Radiator Cooling Plate
Artisan V-Band Clamps
Artisan Cat Back Race Exhaust
AMSOIL 0w-30 Synthetic Oil
AMSOIL Oil Filter
AMSOIL Antifreeze
NOS Nitrous Kit with Intercooler Sprayer
HKS Cam Gears
HKS Fuel Rail
AEM EMS
AEM Digital Ignition System
Suspension & Brakes:
Tein Coilovers
Reinforced upper and lower suspension
Z32 brakes w/ upgraded rotors and pads
5 lug conversion
Wheels and tires:
Konig Wheels
Toyo Tires T1R 235/35ZR19 Front
Toyo Tires T1R 265/30ZR19 Rear
Interior:
BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
AutoPower 6 point Roll Cage
Removed back seat
Aluminum door panels
Carbon Dash
AEM Gauges
Sparco Circuit Pro Seats
Sparco Harnesses
Sparco Steering Wheel
AEM oil pressure gauge
AEM Uego wideband
AEM Boost gauge
K-Sport Hydraulic E-Brake
Exterior:
BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
ITZ-USA Body Kit
Origin 50mm Rear Fenders
Origin 40mm Front Fenders
APR Carbon Wing
Seibon Carbon Hood
TCS Carbon Mirrors
Transmission:
Competition Twin Disk Clutch
Competition Clutch Aluminum Flywheel
Kaaz 2 Way Limited Slip Differential
Reinforced Drive Shafts
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_127991701
http://ep.yimg.com/ca/I/yhst-62631657248580_2119_54103454
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_127924762
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_128323302
The car only needs a tune!
The car is currently located in Los Angeles, CA.
Asking $25,000. Free shipping to anywhere in the continental U.S. if asking price is met. Feel free to post up any questions!
First, a little about the car
-The goal in building this car was to build a true JDM drift machine capable of 600+ hp, and at the same time showing the true passion that Mishimoto has for the industry. The S13 was sent over from Japan to be built specifically for Mishimoto. Throughout the build no expenses were spared, everything from body work to interior and engine parts were upgraded. The project and the work was done at TurboChargers.com in Houston, Texas. The entire project took approximately 7 months to complete.
The car has never been driven on the street, and has a only 3 dyno pulls on the motor. All parts are basically still brand new, tires have 100% tread life left.
Modifications:
Engine:
SR20DET Engine
BC Stroker Kit
BC Springs
BC Retainers
APEX Head Gaskets
ARP Head Studs
Total Seal Rings
Clevitte Bearings
Turbonetics GTK-650 Turbo
Artisan Intake Manifold
Artisan throttle body
Artisan Manual boost controller
Turbonetics Godzilla BOV
Turbonetics Waste gate
Tomei Solid lifters
Turbonetics-66mm turbo
Artisan Tubular Manifold
Artisan Intake Manifold
Deatchwerks 810cc Injectors
Mishimoto Radiator hoses
Mishimoto Custom Radiator overflow
Mishimoto Intercooler
Mishimoto Intercooler Piping
Mishimoto Radiator
Mishimoto transmission cooler
Mishimoto Oil Cooler
Mishimoto Fan Shroud and Fans
Mishimoto Oil Catch Can
Mishimoto Radiator Cooling Plate
Artisan V-Band Clamps
Artisan Cat Back Race Exhaust
AMSOIL 0w-30 Synthetic Oil
AMSOIL Oil Filter
AMSOIL Antifreeze
NOS Nitrous Kit with Intercooler Sprayer
HKS Cam Gears
HKS Fuel Rail
AEM EMS
AEM Digital Ignition System
Suspension & Brakes:
Tein Coilovers
Reinforced upper and lower suspension
Z32 brakes w/ upgraded rotors and pads
5 lug conversion
Wheels and tires:
Konig Wheels
Toyo Tires T1R 235/35ZR19 Front
Toyo Tires T1R 265/30ZR19 Rear
Interior:
BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
AutoPower 6 point Roll Cage
Removed back seat
Aluminum door panels
Carbon Dash
AEM Gauges
Sparco Circuit Pro Seats
Sparco Harnesses
Sparco Steering Wheel
AEM oil pressure gauge
AEM Uego wideband
AEM Boost gauge
K-Sport Hydraulic E-Brake
Exterior:
BASF R-M Mishimoto Orange Paint
BASF R-M Black Paint
ITZ-USA Body Kit
Origin 50mm Rear Fenders
Origin 40mm Front Fenders
APR Carbon Wing
Seibon Carbon Hood
TCS Carbon Mirrors
Transmission:
Competition Twin Disk Clutch
Competition Clutch Aluminum Flywheel
Kaaz 2 Way Limited Slip Differential
Reinforced Drive Shafts
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_127991701
http://ep.yimg.com/ca/I/yhst-62631657248580_2119_54103454
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_127924762
http://ep.yimg.com/ca/I/yhst-62631657248580_2118_128323302
The car only needs a tune!
The car is currently located in Los Angeles, CA.
Asking $25,000. Free shipping to anywhere in the continental U.S. if asking price is met. Feel free to post up any questions!