Manely Turbo Tuff Rods, CP Pistons, Tomei, Supertech, ARP, JWT, ECT.

[SixSpeedSleuth]

Times have gotten hard and I need to part with all the spare parts I've accumulated over the years for building a spare motor. All parts are for an SR20DET block unless otherwise noted. I have all the parts priced lower than ebay so they are in no way outrageous nor out of line. Some prices are a tiny bit negotiable but they are already near the bottom of what I can take for them. I'm also posting everything on eBay later this afternoon so if you are interested, you better act fast. I only accept paypal, and please, no ridiculous low ball offers because I will not respond. These are not "Megan Racing" or knock off parts so don't expect for me to give them away. I will list the parts and prices followed by the pictures. Good luck and feel free to email me with any questions.

CP 9:0;1 86.5mm Pistons $530 shipped.
Manley Turbo Tuff Rods $720 shipped.
Tomei 87mm 1.2 Head Gasket $180 shipped.
SR Redtop Head in excellent shape WITH BRAND NEW Supertech 96lb dual valve springs, TI Retainers and new supertech valve stem seals as well as a hot tanked and milled slightly. Head was looked over at the machine shop and everything was good to go. $500 shipped. (I have more than that in just the parts not including the head, valve job, ect.)
JWT C1 Cams $450 shipped.
JWT Adjustable Cam gears $100 shipped. (Sold!)
OEM Timing Chain Kit $200 shipped. (Sold!.)
OEM Oil Pump cover $150 shipped. (Sold!.)
OEM Water Pump $50 shipped. (Sold!)
OEM S14 water neck $45 shipped. (Sold!)
OEM SR blacktop oil pickup $25 shipped. (Sold!)
OEM Complete gasket kit WITH S15 METAL exhaust gasket minus valve stem seals and OEM head gasket $60 shipped. (Sold!)
OEM Crank pulley, used, in excellent shape $40 shipped.
ARP Head Studs $100 shipped. (Sold!)
ARP Main Studs $80 shipped. (Sold!)
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell017.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell016.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell014.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell010.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell009.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell008.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell006.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell004.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell003.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell013.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell005.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell011.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell007.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/Partsforsell001.jpg
http://i76.photobucket.com/albums/j15/StopTheExcuses/005.jpg

[1GayDrifter]

special package deal for rods and pistons shipped to 77433? :D

[e1_griego]

Sent you a pm.

[SixSpeedSleuth]

special package deal for rods and pistons shipped to 77433? :D
I could take a little off, PM me if your serious:D.

[DJPimpFlex]

shit man where were you like 2 days ago? I just bought a HG and studs!!!! HATEE!! <3 jk

[SixSpeedSleuth]

shit man where were you like 2 days ago? I just bought a HG and studs!!!! HATEE!! <3 jk

Shit dude, just my luck! (And yours I guess, haha.) Is there anything else you need?

Also, updated original post and all PM's replied too.

[traxx07]

I want the head. Will it work on a redtop?

[SixSpeedSleuth]

I want the head. Will it work on a redtop?

Yes sir!! In my rush to post this thread (Notice the misspelled word in the title?? Haha) I also meant to say this head is a REDTOP. So, yes it will. I can take more pictures if you are interested. Head is in great condition and you can check my eBay if you would like for my feedback (%100 spanning 7 years) to gauge the type of seller I am and how meticulous I am with my belongings. (One look at my car will tell you the same, pics if needed :eek:) I have it posted on eBay "Buy it now" but would rather sell it to you to avoid eBay fees. Thanks and PM if interested!

[speedgod^s13]

Yes sir!! In my rush to post this thread (Notice the misspelled word in the title?? Haha) I also meant to say this head is a REDTOP. So, yes it will. I can take more pictures if you are interested. Head is in great condition and you can check my eBay if you would like for my feedback (%100 spanning 7 years) to gauge the type of seller I am and how meticulous I am with my belongings. (One look at my car will tell you the same, pics if needed :eek:) I have it posted on eBay "Buy it now" but would rather sell it to you to avoid eBay fees. Thanks and PM if interested!

Don't forget to get back to me about the block. Thanks.

[SixSpeedSleuth]

Don't forget to get back to me about the block. Thanks.

What's up? Are you sure you have the right person? I don't have a PM from you but I do have a block, I just didn't list it because shipping would be killer on it. Haha. Were you interested in something I have for sale?

[speedgod^s13]

What's up? Are you sure you have the right person? I don't have a PM from you but I do have a block, I just didn't list it because shipping would be killer on it. Haha. Were you interested in something I have for sale?

My bad bro. Wrong person. But, do you have a block, that is bored out already?

[SixSpeedSleuth]

My bad bro. Wrong person. But, do you have a block, that is bored out already?

I have a block, but it's not bored out already. It's good to go otherwise. Interested? I have no idea how much shipping would be tho.

[besTint]

good deal on the head. you say valve job. are they cut?

[SixSpeedSleuth]

good deal on the head. you say valve job. are they cut?

I actually thought it was a valve job but I called the machine shop to make sure and the head was milled slightly, hot tanked, valves lapped and everything was checked to make sure it was good to go, and it was. Don't SR's come with a 3 angle valve job?? So, yeah, either way, it's an insane deal on the head. With the Valve springs, retainers, and valve stem seals alone, I have $400 in it not counting the machine shop work and the actual head itself. It's on eBay as well with a a few watchers already but I would rather sell it on here to save the paypal and eBay fees.

[ross.cottrill]

ill vouch for him,please dont worry at all dealing with him!!!hes been arounf the forums(freshalloy)for a while.hows that t/s 30r treatin ya ;)

[SixSpeedSleuth]

ill vouch for him,please dont worry at all dealing with him!!!hes been arounf the forums(freshalloy)for a while.hows that t/s 30r treatin ya ;)
Thx bro. Good! I just freshened up my tune and made 438whp at a little over 20PSI on 93 octane. Plus, I changed the rear end gear as well to a 4.63. Sooo, looking to hit very high 10's to very low elevens at the track this month :-)

[SixSpeedSleuth]

Bump number 1 of 2.

[SixSpeedSleuth]

Last bump! A lot of pretenders saying the want the pistons and rods but they fold. Somebody take em!

[traxx07]

BUMP! Guy knows what he is talking about and is legit. Buy up guys!