PDA

View Full Version : CA TW: Redtop SR motorset w/greddy headgasket and chipped ecu PART-OUT!


racepar1
08-06-2010, 09:28 AM
LONGBLOCK:
This is for the basic longblock, from valvecover to oil pan, without any accessories or plumbing. I'm not sure on the mileage, but I'm pretty sure it's under 50k. Internally the engine is SUPER clean, no gunk in the head/ports. The engine has been sitting for a long time. It was shut off because the oil pressure was low at idle, just needs an oil pump to be good! The compression was tested at the time that the engine was shut down and it was nice and even across the board. The engine dynoed at 222whp with a stock turbo. Installed in the engine is a greddy metal headgasket. The rocker arm stoppers are not included...

PENDING SALE

If you are interested in buying the complete motorset there is a separate F/S thread for that here:
http://zilvia.net/f/sale-items/335939-sr20det-redtop-motorset-cheap-w-aftermarket-parts.html


CHIPPED ECU:
This is the ecu that dynoed at 222whp on this engine with a stock turbo. It is a #62 ecu for a redtop SR20DET. Unfortuanetly I do not know who'se chip it is though...

$200


All other parts are stock and in good operating condition, prices are listed below...

-Transmission: pending...

-Engine Harness (needs minor re-wiring): $100

-Stock T-25 Turbo (minimal shaft play, NO LEAKS): $100

-Stock SR Exhaust Mani. (x2): $35 each

-Stock SR Turbo Elbow: $25

-Clean SR lower harness: $50

-Alternator/Starter: $45 each

-TPS: $30

-CLEAN Cam Angle Sensor: $75

-Coilpacks: $20 each/$70 for all 4

-CLEAN Coilpack Harness: $50

-CLEAN Knock Sensor/Coolant Sensor Subharness: $20 each

-Intake Mani. Parts: $offer

-Water Outlets/Piping: $offer


Pics of everything are posted below, if you want pictures of something specific please LMK...



http://i275.photobucket.com/albums/jj283/racepar1/SR20DET004.jpg

http://i275.photobucket.com/albums/jj283/racepar1/SR20DET005.jpg

http://i275.photobucket.com/albums/jj283/racepar1/SR20DET007.jpg

http://i275.photobucket.com/albums/jj283/racepar1/SR20DET011.jpg

http://i275.photobucket.com/albums/jj283/racepar1/SR20DET016.jpg

http://i275.photobucket.com/albums/jj283/racepar1/SR20DET017.jpg

240sxenthusiast
08-06-2010, 09:43 AM
What do you mean the sr harness needs to be re-wired? elaborate please. Thanks

M3SP5
08-06-2010, 09:57 AM
any chance i can buy the stock pistons and rods? lmk pm me

racepar1
08-06-2010, 09:57 AM
What do you mean the sr harness needs to be re-wired? elaborate please. Thanks

It was wired in the late 90's/early 00's before wiring SR's was an everyday thing. It needs to be gone through and cleaned up. The only thing that's missing or significantly broken is the MAF sensor connector...

racepar1
08-06-2010, 09:57 AM
any chance i can buy the stock pistons and rods? lmk pm me

Sorry, but I'm not parting out the longblock itself...

Popscribble
08-06-2010, 01:00 PM
Ill pick up the tranny for 250 if you install it?

WhiteTE72GT
08-06-2010, 02:39 PM
Bump for a cool guy

juan s14
08-06-2010, 03:54 PM
i need that t25 turbo.
can you ship?
I need this asap

racepar1
08-06-2010, 05:43 PM
Ill pick up the tranny for 250 if you install it?

Yes, I do installs as well...

i need that t25 turbo.
can you ship?
I need this asap

Shipping is not a problem...