PDA

View Full Version : NJ gtir intake manifold

gtir007
08-02-2010, 12:07 PM
165 shipped, came from a running motor http://i224.photobucket.com/albums/dd181/theogtir/039-2.jpg http://i224.photobucket.com/albums/dd181/theogtir/038-1.jpg
Sam_Well.13
08-02-2010, 12:15 PM
ohhhh i wanted to get this for my N/A SR... even my DET... see what kind of power gains i can get from a ITB Turbo.. like the RB26's.. =]

free bump..

but i think you have to cut and weld to position it on correctly to fit the RWD SR.
jrbump
08-02-2010, 01:05 PM
^ that's only the beginning.

Here was my setup:

http://i105.photobucket.com/albums/m211/jrbump/cars/unnincitb002.jpg
http://i105.photobucket.com/albums/m211/jrbump/cars/unnincitb001.jpg


No serious gains in HP, just peak HP sooner and a flatter powerband.
MikeySand
03-07-2011, 10:39 AM
so is this for the manifold and itbs as well?
Pure_JDM
03-07-2011, 10:48 AM
What all is necessary for this to fit a RWD SR?
deadghost
03-07-2011, 11:29 AM
What all is necessary for this to fit a RWD SR?
:stupid:Some one should educate us,I am currently researching this setup.
smelly240
03-08-2011, 06:25 AM
this thread is old - however - the plenum needs to be flipped and angled down 30ush degrees.

I bought that one off jr bump and found some leaks in th erunner welds so we cut it apart and redid it - and added a 2.75 inlet. @ 420hp it did 365tq - and it was over 330tq from 4500-8000. It did lose 15hp up top - but the midrange was nice.

the tps plug u gotta flip th eouter wires -

I've since gone to a VVL head and a q45 throttle body.