PDA

View Full Version : CA FS: 1991 240sx Fastback w/Real Vertex Aero + JDM Goodies


ryceboy_124
07-31-2010, 05:21 PM
Up for sale is my 1991 Nissan 240sx fastback. Car is a salvaged title but this was only due to damage on the car that the insurance says was more than the car was worth (small fender bender...literally). So...to make a long story short, bought the car back from insurance and the build began. Car runs great and registration is up to date. I can smog for the buyer as well. Car is pretty darn clean and comes with the extra parts I have laying around. Looking to get $10,000obo...price is not set in stone, obviously. All this car really needs is an SR20DET or turbo charge the KA24DE AND YOU'RE IN BUSINESS!!! And now for the list of mods...

http://www.vertex-usa.com/images/ClubVertex/TeamVertex/ryyan1.jpg
http://www.vertex-usa.com/images/ClubVertex/TeamVertex/ryyan2.jpg

REAL Vertex Aero and Vertex Aero fenders - $2420.00
Vertex Shift Knob - $70.00
Vertex Leather Shift Boot - $95.00
Vertex 330mm Deep Steering wheel - $385.00
Vertex Clear Winker Lens - $90.00
OEM Nissan RPS13 Bumper Lens - $125.00
HID H4 Kit - $200.00
Apexi Super Grounding Kit - $150.00
New Paint Job (stock color w/black roof) - $2,800.00
Ichiba 5-lug conversion - $450.00
Front slotted rotors - $150.00
Hawk Pads (all 4 corners) - $140.00
RPS13 Tail Lights - $600.00
Aero Mirrors - $350.00
ZEAL by Endless Function-D Coilovers - $3,069.99
JIC Tension Rods - $300.00
JIC RUCAS - $300.00
SSR Type F Wheels (Black) 18x9.5 +22 (Falken 912 225/40/18) Front and 18x10.5 +15 Rear (Falken 912 235/40/18) w/Carbon Fiber SSR Center Caps - $2800.00
JIC Spartan 505S Stainless Steel 3 inch Catback Exhaust System - $800.00
JIC Rear Carbon Fiber Strut Tower Bar - $280.00
ATS Deft Force 2-Way LSD - $1200.00
K&N Drop-in Air Filter - $70.00
Jensen 7-Inch In-Dash DVD Player - $150.00
Speed Alliance Drift Spec Clutch - $600.00
Nismo Stainless Clutch Line - $145.00
Nismo Clutch Slave Cylinder - $180.00
Nissan OEM Master Cylinder - $120.00
Denso Iridium Plugs - $50.00
Broadway Mirror - $30.00
6 Panel LED Dome Light - $12.00
5Zigen Pro Racer Forged Lug Nuts - $120.00
OEM Nissan Windshield Reveal & Upper Moldings - $230.00
OEM Nissan Back Glass Reveal Moldings - $190.00
OEM Nissan Window Door Strip Moldings (Left & Right) - $174.00 + $152.00
***ABOUT $19,882 WORTH OF QUALITY PARTS INSTALLED***

*Will come with the following parts which are not yet installed if bought @ asking price:
JIC Rear Toe Control Arms (New) - $350.00
JIC Inner Tie Rod (New) - $205.00
Nismo Motor & Tranny Mounts (New) - $250.00
Nissan OEM Windows Visors (painted black) (New) - $180.00
Clean Black Dash (NO CRACKS!) - $200.00
C's Short Shifter (Used) - $180.00
Largus Sway Bars (New) - $650.00
ARC Titanium Hood Cooling Panel - $200.00
Unorthodox Black Crank Pulley (KA24DE) - $150.00
TOTAL: $2,365.00 worth of parts not yet installed

I'm probably missing a few mods/parts here and there on this list but you get the idea. If all parts with prices I listed are added up, it comes out to $19,882 and this is just for the parts that are currently installed...not even including the money I spent on buying the car. I can take parts off to lower the price of the car as well...

Looking to get $10,000 obo...price is not set in stone, obviously.

Odometer reads 225,xxx original miles but car still runs strong. Please contact me if you have any further questions or concerns. I am located in San Diego, Ca. Best and easiest way to reach me is via email @ jdm8six at gmail dot com.

Thanks for looking!!!

D1S13
08-02-2010, 04:39 PM
expensive for a 240- would definately need more pics- no photoshop

D1S13
08-02-2010, 04:40 PM
Highlight your for sale price- i was looking at the parts listed price.- GLWS

ryceboy_124
08-02-2010, 06:07 PM
Here's pix with no photoshop:
http://sphotos.ak.fbcdn.net/photos-ak-snc1/v2621/104/99/1010163232/n1010163232_346966_5251364.jpg
http://sphotos.ak.fbcdn.net/photos-ak-snc1/v2621/104/99/1010163232/n1010163232_346967_7090522.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs137.snc1/5854_1182623358316_1010163232_545885_4886320_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs137.snc1/5854_1182623958331_1010163232_545887_3070027_n.jpg
http://a505.ac-images.myspacecdn.com/images01/86/l_8fe62317320733acf2894e6b142c5a10.jpg
http://a308.ac-images.myspacecdn.com/images01/10/l_c32fd488b49376d561904b1eb0022fcb.jpg
http://a593.ac-images.myspacecdn.com/images01/63/l_e344fc23acb1fc25fcbfc51e20e030f0.jpg
http://a850.ac-images.myspacecdn.com/images01/11/l_32e9ec4450a59218fcc9fb29a6132c69.jpg
http://a16.ac-images.myspacecdn.com/images01/45/l_861418566ea4de63717bce71a44f2267.jpg
http://a815.ac-images.myspacecdn.com/images01/2/l_e4ae826ebf6cc58eacbe7a19dd8656a6.jpg
http://a630.ac-images.myspacecdn.com/images01/73/l_67a0ea52af5aa76367fc0037ba885c15.jpg

I also marked my asking price in bold as requested. It is a lot but all parts bought were bought brand new. Asking price, like I stated before, are not set in stone. I know my asking price is a bit on the high side but I have seen ugly 240's sell for $3-4K and not even close to the stuff I have on my car nor the clean visual appeal. As stated earlier, I am willing to negotiate...Thanks for looking!

dr1ft32
08-02-2010, 11:28 PM
i think its a very good price. would buy if i was in the market. free bump

240sxWinkeR
08-03-2010, 10:10 AM
I agree, ugly 240s at a price where it shouldn't be. Glws
Bumpity bump

ryceboy_124
11-25-2010, 10:28 AM
1st bump...

240o'clock
11-25-2010, 01:26 PM
Really really nice 240, but i do have to agree 10k is pretty damn steep, Especially since its not even turboed or anything like that. Who knows how it looks under that hook even though the appearance is FLAWLESS....I say slap a turbo on this bad boy and you might get your asking price. But w/o a turbo i dont see 8k in this

RPSil13
11-25-2010, 05:50 PM
which wheels will it come w/?
interested in any trades 07 yaris 5spd?

gots13?
11-26-2010, 12:41 PM
lmk if u are serious of selling but not for 10000.......

Siberian Husky
11-26-2010, 02:15 PM
10k for salvage is never going to happen.

stop trying to recoup $ lost on parts.

part it out, you have some great parts on that thing, then sell the car for what it is worth.

just my opinion, glws. love the color.

ryceboy_124
11-27-2010, 06:39 PM
All this car needs is an SR or a turbo for the KA. Price may be steep but it's my price nontheless. All parts on this car are top quality and not cheap china knock off stuff. I've seen crappy 240's go for 3-4k but with sr20det...whoopty doo! So if I turbo this for $800-$1500 I can get my asking price??? Really?! How about I knock off $1500 and sell as is? BTW, the car will come with SSR Type F's in flat black. Sizing is 18x9.5 +22 front and 18x10.5 +15 rear with Falken 912 tires (225/40/18 front & 235/40/18 rear). Like I said...QUALITY parts!!! Check online to see how much the wheels alone cost...

ryceboy_124
11-27-2010, 06:43 PM
lmk if u are serious of selling but not for 10000.......

Throw some numbers at me...price is negotiable but don't insult me by lowballi ng. I'd part the car out and prob make $$$ but I don have the patience nor the time so I'd rather sell as is. Everyone is welcome to their own opinion and I appreciate the feedback and bumps but like I said, it's my price which is negotiable to a certain extent. Thanks!!!!!!!!

ryceboy_124
11-27-2010, 06:51 PM
10k for salvage is never going to happen.

stop trying to recoup $ lost on parts.

part it out, you have some great parts on that thing, then sell the car for what it is worth.

just my opinion, glws. love the color.

I forgot to mention that I also purchased and installed brand new OEM Nissan front windshield, left & right door window, and rear hatch window moldings. That alone was about $700 or $800 from the dealer if I remember correctly. I think that the amount of time, effort, and money is worth $10k but thats me. How many of you have replaced your window moldings???

gusisboosted
11-27-2010, 07:10 PM
And yeah man, if you turboed it or swapped in a sr you would definately get your asking price.

But as it sits its not gonna happen.

Love the way the car came out though, if i had money laying around i'd definately be making you an offer.

GLWS.
but parting out is thebest option

drifter1000
11-27-2010, 07:35 PM
I think what people are trying to get at is, yes you have an amazing looking car. But those parts aren't brand new in box, you bought them and as much as you want that money back, its NOT going to happen...especially here on zilvia.

Hope you get something close to your asking price GLWS.

jparker7
11-27-2010, 07:42 PM
swap it and Ill trade you my ls1 FC for it.

ryceboy_124
11-27-2010, 11:52 PM
I think what people are trying to get at is, yes you have an amazing looking car. But those parts aren't brand new in box, you bought them and as much as you want that money back, its NOT going to happen...especially here on zilvia.

Hope you get something close to your asking price GLWS.

Parts are basically brand new as this car sits in the garage most of the time. I have a daily driver so this car sees the road maybe 3-4 times a month, if that. I appreciate the kind words but once in a blue moon there are people here on Zilvia with money so maybe I am hoping to find that buyer someday (aka wishful thinking). I'm not desperate to sell so it doesnt matter if I sell now or a few months/years from now. If I dont sell at all, I'd rather beat it to sh*t and enjoy the parts I have on this car and sell the car for less at that time.

I have an AE86 that I might sell as well but for prob double what I'm asking for this 240sx. As you can see...I dont cut corners on my builds:

http://www.iputinwork.com/wp-content/uploads/2009/07/vertexusa_01.jpg

If anyone is actually interested, please just PM/IM or even email me. Thanks for everyone's opinion and feedback...

zingo
11-28-2010, 12:06 AM
I Take it back, this guy knows his shit better than I ever would :bowrofl:

ryceboy_124
11-28-2010, 12:19 AM
so lemme get this straight, over 16k invested into this car on mods, not even a fraction of that money into engine swap and engine mods? You DO live by your name sir, rycerrr

Really? What part of my car is ricer? Is it the authentic Vertex kit? Is it the Full stainless JIC catback? How about the SSR Type F's? Maybe its my ATS Deft force 2 way LSD or my Zeal coilovers...Just because I dont have an engine swap...doesnt mean I'm 'ricer.' You are ill-informed and very uneducated. So let me guess...you have an SR20DET and you can go fast in a straight line...WHOOPEE!!! So...your car is fast but looks like shit right? I had an SR20DET which I got for free but decided to give it up since I didnt want to deal with all the crap that comes with engine mods and CHP. Just because I play it smart doesn't mean I'm ricer. And by the way, I had this screen name since highschool. It was my first email address and my name is Ryan and I'm filipino (so I eat a lot of rice)...this is how the SN came about. It has nothing to do with being a ricer. You sir should change your SN to ID10T...it suits you much better.

pacificcoastautobody
11-28-2010, 12:55 AM
This car is as legit as it gets. 10k is a fair asking price. I have seen the car in person and every part is top notch. Whoever buys this car is getting a great deal. To all the haters. Quit hatting! just because your too cheap to put real parts on your car doesn't mean you need to rip someones add that knows how to build a car. glws

ryceboy_124
11-28-2010, 12:58 AM
This car is as legit as it gets. 10k is a fair asking price. I have seen the car in person and every part is top notch. Whoever buys this car is getting a great deal. To all the haters. Quit hatting! just because your too cheap to put real parts on your car doesn't mean you need to rip someones add that knows how to build a car. glws

Thank you sir! Much appreciated. Hows the S14 and S15 BTW? We need to hit the track next year... :)

I'm done with this thread...if anyone is serious about purchasing...my contact info is on my profile. I am willing to negotiate on price and even willing to take parts off the car to lower the price, etc. Thanks to all the NON-HATERS...

Karlitos
11-28-2010, 01:24 AM
Damn this car is clean as hell... Didnt know you were selling it... I wish i had the patience he does to not cut corners and not buy knockoffs...Probably one of the cleanest car on zilvia now, everyone is hating, see it in person and you'll fall in love with it. And put it this way, this car is ready for a swap since everybody cheaps out on suspension anyways. All you have to do is change the motor. Anyways GLWS buddy.

Marcus
11-28-2010, 11:15 AM
so lemme get this straight, over 16k invested into this car on mods, not even a fraction of that money into engine swap and engine mods? You DO live by your name sir, rycerrr

hahahahhahaha. his wheels are worth more than your car.

his coils are worth more than your car.

his paint cost more than than your car.



oh yea, he drifts the shit out of it like that. full suspension/diff on stock KA.


hmm wheres your nuts, zingo?

zingo
11-28-2010, 11:19 AM
Really? What part of my car is ricer? Is it the authentic Vertex kit? Is it the Full stainless JIC catback? How about the SSR Type F's? Maybe its my ATS Deft force 2 way LSD or my Zeal coilovers...Just because I dont have an engine swap...doesnt mean I'm 'ricer.' You are ill-informed and very uneducated. So let me guess...you have an SR20DET and you can go fast in a straight line...WHOOPEE!!! So...your car is fast but looks like shit right? I had an SR20DET which I got for free but decided to give it up since I didnt want to deal with all the crap that comes with engine mods and CHP. Just because I play it smart doesn't mean I'm ricer. And by the way, I had this screen name since highschool. It was my first email address and my name is Ryan and I'm filipino (so I eat a lot of rice)...this is how the SN came about. It has nothing to do with being a ricer. You sir should change your SN to ID10T...it suits you much better.

I have other mods than just engine mods too, idk what came over me yesterday, I dont usually shit people's threads, just felt like starting shit I guess, I like your trueno though, pinoys are notorious for tuning toyotas, idk why haha, at every toyotafest, theres always pinoys everywhere that have the best looking toyotas, and it's true they DO NOT cut corners, I guess I just thought what you were asking for was ridiculous or something, idk, no hard feelings, I'm a beginner myself, as least you have legit parts, not like some mexcians I know going to pep boys for their "performance parts", well anyway, sorry if I offended I was being an :mrmeph:

timinthehood
11-28-2010, 11:25 AM
holy shit this thing is niice!!!! who painted it? all it needs is a sr and its good2go, GLWS

pacificcoastautobody
11-28-2010, 12:32 PM
waiting for my re tuned ecu on the s15 and the s14 is almost done. i had turbonetics build me a custom turbo and fully built the ka. its going to be nutz.

pacificcoastautobody
11-28-2010, 12:33 PM
Thank you sir! Much appreciated. Hows the S14 and S15 BTW? We need to hit the track next year... :)

I'm done with this thread...if anyone is serious about purchasing...my contact info is on my profile. I am willing to negotiate on price and even willing to take parts off the car to lower the price, etc. Thanks to all the NON-HATERS...


waiting for my re tuned ecu on the s15 and the s14 is almost done. i had turbonetics build me a custom turbo and fully built the ka. its going to be nutz.

Panda-Eats-240
11-28-2010, 12:45 PM
These builds are why i check into zilvia every 5 months :O

Anybody saying that it's not worth the money just because of no work done to the motor, is a moron. Can't you see that ALL it needs is a motor or turbo setup, and then it can be competition ready?

In the hands of a serious person, this would be a serious competition built car. Not just another car with half-assed body work and a couple bolt on parts here and there, and then throw in an SR and try to sell it for more than it's worth. All of the serious work to this has been done, except the motor. Plus, if it's in the hands of a serious person, they would likely have swapped out the motor or completely re-do it to their liking. This will actually save them a little cash.

Great car, GLWS.

unlegendary
11-29-2010, 03:09 PM
bump for ryan, got any vids?

hOngsterr
11-29-2010, 03:25 PM
fucken shit, bump for another Zeal owner.

Kodykinns
11-29-2010, 04:14 PM
Free bump for you sir. people want to buy a built car for nothing. glws man

ryceboy_124
11-29-2010, 10:47 PM
I have other mods than just engine mods too, idk what came over me yesterday, I dont usually shit people's threads, just felt like starting shit I guess, I like your trueno though, pinoys are notorious for tuning toyotas, idk why haha, at every toyotafest, theres always pinoys everywhere that have the best looking toyotas, and it's true they DO NOT cut corners, I guess I just thought what you were asking for was ridiculous or something, idk, no hard feelings, I'm a beginner myself, as least you have legit parts, not like some mexcians I know going to pep boys for their "performance parts", well anyway, sorry if I offended I was being an :mrmeph:

All good. I'm glad you owned up...so we're straight bro. I'm a easy going guy but I HATE it when peeps talk shit about stuff thats uncalled for or completely untrue. I commend you on owning up...so thanks and no hard feelings.

hahahahhahaha. his wheels are worth more than your car.

his coils are worth more than your car.

his paint cost more than than your car.



oh yea, he drifts the shit out of it like that. full suspension/diff on stock KA.


hmm wheres your nuts, zingo?

Marcus...thanks for the back-up bro. We gotta hit up the track before I sell this car...if I ever sell this car. HAHA!

bump for ryan, got any vids?

Mike...I only have one vid and I think it was the first or second time I took this car out to drift at a track (Balcony). As you can see, I'm not too good in the vid nor do I claim to be a good drifter but I do like to try and have fun doing so...LOL! I need to install my Largus sway bars asap. You can see the lean in my vid...heehee!

Vid:
YouTube - Private Drift Event - February 27, 2009 (My Best Run of The Day) (http://www.youtube.com/watch?v=sfE0qdeNFFM)

Everyone else with the positive comments...thank you so much!!! I added more parts to my mod list that I overlooked. So, price of parts installed (not including cost for labor) is actually more than I originally stated...WOW! About $20K invested on parts currently installed. If I add the parts not installed...It goes OVER $20K. WOW x 2!!!

iwishiwas-all*
11-30-2010, 04:53 AM
Well figuring not just the motor, the boltons, the labor, anything else in the swap ( figure 3k in work) will probably get you 10k, even though it's a salvage title.

It's a nice car.

DJDANGER24
12-01-2010, 06:53 PM
yo bump fo da kleen two fo-tay

DJ Silent
12-02-2010, 09:08 PM
Bump for ya, awesome car seen it at the meets a couple times looks amazing

blakeZX
12-07-2010, 08:51 PM
Ryan helped me out when I first got my S14, and I have always been in awe of how clean his car is. As a car buyer, it's a relief to know that you aren't getting someones abused piece of shit drift missile that they threw some knockoff aero on and resprayed at earl scheib. This car will make someone very happy. Super legit!!

dops13
12-09-2010, 02:26 AM
This car is clean and looks good guys. The price is fair. If you dont like the price or can't afford this beautiful sexy momma then go find a slut in your price range. It's a good starting point for a new owner to add more power if they like. Bump for a buddy!

ryceboy_124
12-29-2010, 09:40 PM
Thanks Blake...thanks Dop!!!

lbsam
12-29-2010, 10:33 PM
nice car, quality parts go along way.. hope you get what your asking.. trust me i know about all that. GLWS

gusisboosted
12-29-2010, 11:03 PM
Pure quality here..... I love this thing.

GLWS BRO !! :)

VarrsToen
12-30-2010, 11:29 AM
One well executed s13! GLWS

ryceboy_124
01-19-2011, 06:18 PM
Still for sale. Just got my 225/40/18 Falken 912's mounted on the SSR Type F 18x10.5 +15's. Looks pretty sick...

SuperiorS14
01-19-2011, 07:30 PM
Still for sale. Just got my 225/40/18 Falken 912's mounted on the SSR Type F 18x10.5 +15's. Looks pretty sick...
those 10.5"s must be nice...
wheres my $50? i thought you were gonna paypal me it...................:mad:

M3_Sil80
01-19-2011, 08:57 PM
I think you will get your money way easier and faster if you just take parts out and sell separately! Coilovers, wheels, LSD, exhaust, bodykit etc;
Nice parts bump

LBCtoofortee
01-20-2011, 04:48 AM
this thread is fuckin hilarious :D

Thaiboy
01-22-2011, 08:48 PM
Wow this thing is still for sale?
This car looks familiar. (Besides seeing it in this for sale forum several months ago)
You didn't happen to bring this to one of the SD auto shows did you? Nice car. :)
Good luck with the sale! ;)

ryceboy_124
01-26-2011, 12:59 AM
those 10.5"s must be nice...
wheres my $50? i thought you were gonna paypal me it...................:mad:

I'm still waiting on the SSR Type F stickers you promised me that you were gonna look for in your garage...:(

ryceboy_124
01-26-2011, 01:07 AM
Wow this thing is still for sale?
This car looks familiar. (Besides seeing it in this for sale forum several months ago)
You didn't happen to bring this to one of the SD auto shows did you? Nice car. :)
Good luck with the sale! ;)

Yeah, I had this car at the San Diego Speed Festival a couple years ago at Coronado. Maybe thats where you saw it...

worangejuice
01-26-2011, 02:19 AM
Selling cars on zilvia is kinda retarded, no enthusiast on here will buy a 240sx for more than $3-$4000?
The seller usually wants way more than the car is worth (and they probably have a valid argument) ;but everyone wants to buy it for a 'fair'/cheap price.
The build/parts/time price amount is always taken into account when a price is equated. Yes the car is cheaper as a whole than building it up yourself. But fact is no one on here has that kinda cash to throw around.
So you get the redundant end result of having to part out the "drift-ready mega money-pit machine and sell the car as stock. The next buyer then builds it back up to the spec it was at before the part-out and sale began..................
so let the part-out begin!!!

ryceboy_124
01-31-2011, 10:59 PM
Selling cars on zilvia is kinda retarded, no enthusiast on here will buy a 240sx for more than $3-$4000?
The seller usually wants way more than the car is worth (and they probably have a valid argument) ;but everyone wants to buy it for a 'fair'/cheap price.
The build/parts/time price amount is always taken into account when a price is equated. Yes the car is cheaper as a whole than building it up yourself. But fact is no one on here has that kinda cash to throw around.
So you get the redundant end result of having to part out the "drift-ready mega money-pit machine and sell the car as stock. The next buyer then builds it back up to the spec it was at before the part-out and sale began..................
so let the part-out begin!!!

Yeah...I totally feel you on that but if I cant sell it then its not a big deal to me. I'll just hang onto it and track it every so often and enjoy it like I should. The S crowd reminds me so much of the ae86 crowd...no one has money. haha! Its still for sale and price is OR BEST OFFER. Like I said, if it sells for asking price, I will include all the additional parts I have for it...which is a lot. Thanks!!!