Parting out my life

[Shift_Cory]

UPDATE: PITURES ON PAGE 2!!!!!









Hey guys, i have been into 240's for like 5 or 6 years now, and i've had a bunch of them... collected ton of shit.... you know the deal. been working on 2 cars for a while now and just said fuck it and bought a running one. so now i have like 3 of everything. i dont have time right now to post each individual item but if you go to my photobucket u can look through it.... heres just the tip of the ice berg for you

greddy profec b boost controller
safc neo
megan turbo elbow
3 sr's im going to either sell 1 as swap and part rest or.... whatevers clever
3 clean hatches
clean dash boards
i will cut the cars apart, sell as whole WHATEVER YOU WANT
fake nardi 330m
real nardi 350m
used arp studs
v3 sides
tons of interior shit
old skewl recaro seats


im at work right now but ill throw pics up tonight i just wanted to get this started because i keep not putting anything up.... and then buying more shit lol.

Pictures by shift_cory - Photobucket (http://www.photobucket.com/shift_cory)

if you need anything just ASK i have sooooo much fucking shit.

Thanks!

and for anyone wondering im in northern illinois. and im down to ship anything buy a body if you pay for it

email me at [email protected]

[penco]

How much you want for just one of the sr blocks? And what would it include for that price?

[93nismo]

email sent about the nardi's

[jarend]

ill give you 30 bucks shipped for one of your oil dip stick tubes and oil dip stick as long as it isnt bent.. pm me

[BURSTspeed]

LEGIT seller right here.

[240ND]

if you're willing to literally cut one of them apart, my hatch needs a clean drivers side rear quarter!

[kbui]

Looking for a s13 driver and passenger side power window switches? and a 91-94 ka24de ac compressor and the lowside line (from the evap behind the block to the compressor)

lmk
thanks
[email protected]
pm or text 505-620-5650

[Clutch Dog]

You have some altima dual fan radiator fans??

how much for a complete set of A/C Lines and condensor

[WindyCity]

hey, how much for this front bumper picked up?:
IMG_0514.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0514.jpg)

and do you have a stock rear bumper to fit a coupe?

how much for the side markers in this pic?:
IMG_0476.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0476.jpg)

i understand you probably dont want trades haha but id like to trade my mint origin 30mm fronts for these:
Picture043.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=Picture043.jpg)

not familiar with this site and i havent figured out pm's so if you dont want to give me the prices on here please email me ([email protected]). id like to come and get this stuff asap!

oh btw if you can give me a better idea where you are in northern il that'd help.

edit: send me a pm on here just found it. but for some reason when i click your name it doesnt pull up the option to pm... so email me or pm whatev.
thanks.

[cesdezSil80]

sr oil pan, ka24de ecu, pig nose lip, how much shipped to 93215

[duynguyenn240]

is that oil pan the real thing?

[Mitsubayati]

What kind of side skirts are those? How much shipped to 94579?

[93nismo]

hey, how much for this front bumper picked up?:
IMG_0514.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0514.jpg)

and do you have a stock rear bumper to fit a coupe?



that link has 2 rear bumpers. and to my knowledge coupe and hatch rear bumpers are the same.

[93nismo]

IMG_0514.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0514.jpg#!oZZ117QQcurrentZZhttp%3A%2F% 2Fs485.photobucket.com%2Falbums%2Frr216%2Fshift_co ry%2F%3Faction%3Dview%26current%3DIMG_0426.jpg%26)

are those privacy covers for hatches? if so how much for 1.

IMG_0514.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0514.jpg#!oZZ129QQcurrentZZhttp%3A%2F% 2Fs485.photobucket.com%2Falbums%2Frr216%2Fshift_co ry%2F%3Faction%3Dview%26current%3DIMG_0306.jpg%26)

how much for the piggy lip?

also, do you have the cover for the sunroof? the bag and the piece that attaches to the bottom of it so sun dosent get in? im interested in all of this. but i probably done have the money for all of it. let me know prices in pm or here or email me at

[email protected]

[spindrift187]

i need like the entire black interior for a hatch with sunroof. only thing i don't need is carpet, seats, dash, center console, door panels. but like all the plastics/pillars/headliner etc. if you have all of that in black PLEASE let me know as i'm paypal ready now...

[Mitsubayati]

that link has 2 rear bumpers. and to my knowledge coupe and hatch rear bumpers are the same.

no they aren't . . .

[Jaliscano]

greddy profec b boost controller <---- HOW MUCH?

[Shift_Cory]

oil pan is sold, side skirts are version select V3 i think.

those rear bumpers are long gone but i have a grey one i think still..... if your interseted. and the coupe and hatch rear bumpers ARE DIFFERENT!

yep those re privacy covers, got a few left

no pig lip, not sunroof cover.

i have tons of interior shit your just going to have to pm me a list of what exact parts you neeed in a list so i can go grab everything out

profec B i'd like to get 200 for it

found an oil catch can and a few other things, tomorrow i'll get more pics and load them up onto zilvia this time, since i have the weekend off thank god!

[WindyCity]

so do you have a front bumper and a coupe rear bumper?

[dookiedang]

how much for the rolling shell? name a good price and its mine :D. lmk thanks.

[Adam496]

Do you have a non abs s13 rear caliper?

[co9ff]

How much for your gargage? LOL.

[Shift_Cory]

you would have to come and look at the cars if you were really interested. the grey one was rusty but i repaired almost all of it, but i had overfenders on the rear already and some other shit so it was just going to be for sliding. the black car is rust free but it has bondo on the rear quarter.

[dookiedang]

youve been PM! lmk soon thanks!

[besTint]

how much for the oil pan?
http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0636.jpg

[WindyCity]

do you still have the front bumper and a coupe rear bumper??????????

[lflkajfj12123]

How much for the profec?

[silvialove]

Happen to have a s14 dash windshield vent?

[andyv316]

Got a good t25?

[c72c]

couldn't see all the pics..do you have the rear garnish that goes between/under the tails for a coupe?


are those privacy covers for hatches? if so how much for 1.

considering the don't make them for coupes...:hahano:

[Duker]

Interested in the pan, VLSD if you got one, and id love a set of S14 coilovers..
shipped to 41101 PM details plz

[Driftin_240sx]

coolant reservoir?

[Rockogtr]

how much for this nardi wheel shipped to 01453
http://i485.photobucket.com/albums/rr216/shift_cory/Picture077.jpg

[necosr20]

How much for the REAL nardi? Shipped to 08234

[Shift_Cory]

http://i485.photobucket.com/albums/rr216/shift_cory/Picture358.jpg
$50 + shipping
http://i485.photobucket.com/albums/rr216/shift_cory/Picture357.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture355.jpg

Hybrid dynamics i think intercooler and some piping 160 OBO + ship

http://i485.photobucket.com/albums/rr216/shift_cory/Picture354.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture356.jpg
no name intercooler and turbo xs bov with shitty piping $250 OBO + shipping

http://i485.photobucket.com/albums/rr216/shift_cory/Picture351.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture349.jpg

ka24de oem headgasket, 3 in mr. gasket downpipe gaskets, subframe bushings, sr20 manifold gaskets.... just make me an offer on these

http://i485.photobucket.com/albums/rr216/shift_cory/Picture344.jpg
dual electric fans $50 +shipping

http://i485.photobucket.com/albums/rr216/shift_cory/Picture340.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture338.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture343.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture341.jpg
clean hatch, NO RUST $150

http://i485.photobucket.com/albums/rr216/shift_cory/Picture337.jpg
clean stock steering wheels $25 + ship

http://i485.photobucket.com/albums/rr216/shift_cory/Picture333.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture329.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture332.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture335.jpg

mk2 VW recaro's someone made some ghetto ass rails for them so they will need rails. they are clean as fuck tho. $400 OBO

http://i485.photobucket.com/albums/rr216/shift_cory/Picture033.jpg
whole shell, or part out.

http://i485.photobucket.com/albums/rr216/shift_cory/Picture039.jpg
blacktop swap. will come with different pulley and valve cover. $1300

http://i485.photobucket.com/albums/rr216/shift_cory/Picture041.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture043.jpg
$150

http://i485.photobucket.com/albums/rr216/shift_cory/Picture046.jpg
clutch pedal $50 +ship

http://i485.photobucket.com/albums/rr216/shift_cory/Picture049.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture051.jpg

http://i485.photobucket.com/albums/rr216/shift_cory/Picture054.jpg
hatch that need needs window replaced, there is a spot where u can feel little melted spots from using a grinder. its not that bad. i will include a new window. it is RUST FREE. $100

http://i485.photobucket.com/albums/rr216/shift_cory/Picture063.jpg
boost gauge, theres a short in the wire, it might have just been my wiring too because if i just moved the gauge around when i drove it would light up and shit.... i never actually mounnted it down so i just would wiggle it till it turned on lol... so maybe need diff wires on it i dunnnoo. $50 plus ship


http://i485.photobucket.com/albums/rr216/shift_cory/Picture071.jpg
60mm gauge pods $20 shipped
http://i485.photobucket.com/albums/rr216/shift_cory/Picture074.jpg
$10 + shipping


http://i485.photobucket.com/albums/rr216/shift_cory/Picture077.jpg
FAKE nardi - $70 + shipping

http://i485.photobucket.com/albums/rr216/shift_cory/Picture081.jpg
shift boot $15 + ship


http://i485.photobucket.com/albums/rr216/shift_cory/Picture244.jpg
version select sides $150

http://i485.photobucket.com/albums/rr216/shift_cory/Picture242.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/Picture238.jpg
pre bent WELD IN S&W roll cage. 6 point. $250
http://i485.photobucket.com/albums/rr216/shift_cory/Picture227.jpg
blitz exhaust $150 +ship. i welded a whole shut on it but it sounds fine. few dents in it

http://i485.photobucket.com/albums/rr216/shift_cory/Picture098.jpg
spare tires $20 + ship


http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0683.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0685.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0686.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0689.jpg
http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0690.jpg
MINT ka24de harness $80+ship

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0658.jpg
under the tail light.... things. $25 + ship


http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0655.jpg
s14 rear bumper with plate $20

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0635.jpg
msd $100 shipped

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0503-1.jpg
hub caps $25 for 4 + ship

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0437.jpg
i have a couple 5 speed drive shafts and a couple x memebers. $120 for a d/s and $35 for x memeber + shipping

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0443.jpg
S14 speaker pods for the doors. $30

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0445.jpg
random parts, make offers

http://i485.photobucket.com/albums/rr216/shift_cory/IMG_0451.jpg
FULL UNCUT AND COMPLETE s14 interior harness. goes from engine bay to under the dash the the trunk $200 OBO


If you see something you want or want to know if i have anything email me at [email protected] for the fastest response

[PerilousActs]

Is this an oversized waterpump pulley?
IF so, price?
http://i485.photobucket.com/albums/rr216/shift_cory/Picture039.jpg

[Billiam151]

how much for the seats, and one of those privacy covers?

[94spitfire91]

THis wouldnt happen to be for an s13 would it??
IMG_0279.jpg picture by shift_cory - Photobucket (http://s485.photobucket.com/albums/rr216/shift_cory/?action=view&current=IMG_0279.jpg)
I would be so happy if it was but if its not do you have a completely uncut chassis (not engine dont need it) harness for the entire s13 hatchback?? And i think im gonna send a pm about your "under the tail light things" haha

[SupaDoopa]

Pics/price for real nardi.

[realestvin7]

PM me a price on S14 KA engine harness shipped to 76209. Also, any coil overs? Thanks.

[mrsuave]

stock suspension? for s13vplease and thanks

[BURSTspeed]

free bump for you

[s-13 noob]

any s14 lower control arms?
if so please pm me thanks

[kernel]

How much for blitz exhaust shipped to canada, G2E 4L2

thanks

[Napalm]

Have any t25 turbo lines? Shoot me a price shipped to 34436 if so. Thanks man! glws!

[ryster]

Mint ka24de ecu harness and oil catch can sold to me....

Positive trader rep when I get them in the mail. lol!

Thanks!

[alisak]

how much for the real nardi

[Shift_Cory]

http://i896.photobucket.com/albums/ac169/shift_cory1/Picture368.jpg
stock sway bars $25 each. s13 and 14 front and rears
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture374.jpg\
Front and rear bumper supports
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture380.jpg
s14 and z32 2+2 quarter windows. $50 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture384.jpg
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture385.jpg
s13 quarter windows $50 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture388.jpg
s13 windows $50 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture391.jpg
steering columns. s14, s13, and z32. some with keys
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture404.jpg
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture402.jpg
ka radiator with hoses to work on sr20. $40 for radiator $30 for fans $20 for hoses
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture405.jpg
Z32 2+2 rear bumper $40
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture411.jpg
S13 hatch rear bumper $30
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture415.jpg
$20
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture420.jpg
$40
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture422.jpg
$25 for s14 rear bumper
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture426.jpg
MINT black dash $100
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture447.jpg
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture449.jpg
clusters. make offers
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture455.jpg
headlight covers $15 each, the s13 door things$5 each. s14 gas tank door $20
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture457.jpg
gauge cluster sub harnesses $15 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture461.jpg
sohc s13 dohc and s14 dohc mafs
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture462.jpg
$25
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture464.jpg
Sohc ecu's $35 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture467.jpg
s14 ecu's $45 each
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture472.jpg
5 speed parts. pm for what you need.
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture473.jpg
handles and others. pm me
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture478.jpg
random stuff
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture486.jpg
s14 subframe $60
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture489.jpg
s14 dif cover $25 dohc upper timing chain cover $25, sohc lower $25. dohc water necks$15.
http://i896.photobucket.com/albums/ac169/shift_cory1/Picture509.jpg
z32 rear calipers


i still have alotttt of stuff im and im gonna change all the prices on my other stuff and delete what i sold. please help me get rid of all this stuff!

email me at [email protected]

thanks!

[ANVIL]

Any 5 bolt axles? For vlsd s13?

[jah]

will you be will to ship the rad?

[bmhossain]

Sent you an email sir. Got a few things I am in need of

[chiprez]

pm sent.ill be sending an email too

[BuSTR93]

do you ship

[Shift_Cory]

Ya i can ship not a problem

[Shift_Cory]

Deleted what i have sold, and changed up some of the prices. comeon guys i need some more money for wheels!

EMAIL ME at [email protected] for the fastest response. and i will be posting more shit up tonight if i can get my car back together lol

Thanks to anyone thats bought somethin so far!

[94spitfire91]

Hey you never answered my pm's back or i never got it either way im willing to do business if you want the money

[chiprez]

yo,still interested in the shifter stuff.get back at me when you can
http://us.mg3.mail.yahoo.com/ya/download?fid=Sent&mid=1_965506_ALLFtEQAAIWfTHM9cAWULSWi%2Bug&pid=2&tnef=&YY=1282621184686&newid=1&clean=0&inline=1

[shinmei-2006]

ill buy the turbo/DP/Mani gaskets from you. PM me a price

[driftlife]

dam your garage is my ideal of heaven

[BoredEE]

Do you have an s14 interior fuse box kick plate cover?

I'm in 60523, let me know how much and maybe I can pick it up if you're close enough.

[iRockairjordan]

interested in the radiator hoses for the sr also boost controller turbo xs BOV and also a ka24de cluster shipped to 84120 lmk give me a price pm me thanks

[lainardisboss]

deep title, bump

[Shift_Cory]

Bump, i kinda fell off the earth for a minute but im back. STILL HAVE LOTSSS OF SHIT LEFT. plese pm me if you need anything i really want this shit gone. i'd rather it go to 240 people that the dumpster.

[gsr-boost-dc]

How much for a clean S13 dash?

[SHIFTrl240]

Ahhh i reallly want that hatch but northern illinois is a far drive.

[Irresistible]

Got a 5spd DE trans that'll fit a 96?

[chiboy002]

how much for a pair of the rear stock s13 tails, just the sides

ill give you 15$??? Pick up when ever, after 3pm.

wanna make them red and clear :)

[Dominic Axelson]

PM'd you.........

[Scotty F. Baby s13]

I'll give u 100 for the both fenders

[chaotix]

Hey man where do you live in IL i can prolly come by pick some stuff up