Huge SR Partout HKS, Greddy, Apexi, CS, OEM Almost all new

[92RMS13]

UPDATED!!!

All parts are new except where noted, parts are available for local pickup, can ship at buyers expense, payment - Cash, Postal Money Order, or Paypal, if paypal please include 3% fee.


SR20DET Longblock, started as good running kouki S13 engine, reassembled with ACL race bearings rod/main/thrust, Mazworx head stud kit, Cosworth MHG, Tomei 256 Poncams, S14 Oil pickup, RAS, Block and head both hot tanked and decked, S14 Water pump, Enjuku Racing exhaust manifold stud/nut kit, new oem valve cover studs, will include bare intake manifold-no electronics, and valve cover.

$2100

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4829.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4830.jpg

Garrett GT2871R, 52Trim "28R" style compressor housing, exhaust housing is .64a/r and has been ceramic coated, includes stainless studs and nuts on exhaust outlet side and new studs for compressor inlet, as well as oil drain kit. $1150

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4818.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4819.jpg

Circuit Sports billet aluminum fuel rail $150

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4799.jpg

Dif "forged" turbo lines $150

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4798.jpg

E5 Ecu, tuned for 740cc injectors and Zmaf by RSEnthalpy $400

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4787.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4786.jpg

HKS 740cc Injectors, new except for now having O-rings installed on them. $500

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4770.jpg

Blitz SE FMIC S13 Kit, $490

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4840.jpg

Fidanza aluminum flywheel with ACT 6 puck sprung clutch kit, includes new act throwout bearing, was installed and broken in, an awesome setup $450

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4763.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4762.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4759.jpg

Apexi pen type turbo timer with CS harness $100

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4755.jpg

Greddy aluminum oil pan $340

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4746.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4748.jpg

Flex-A-Lite Dual 12" puller fan setup $275

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4742.jpg

Enjuku Racing hotpipe with greddy type RS BOV $250

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4726.jpg
http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4725.jpg

Hotpipe for Greddy bov, one pictured above with no bov $40

Greddy "suction kit" for installing T28 with Z32 maf into S13 with no poor fitment, everything but the foamie filter $220

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4821.jpg

Dakota Digital Electronic fan controller $120

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4822.jpg

New Nabco slave cylinder $20

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4779.jpg

SR Coil Pack Harness $20

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4806.jpg

New OEM Thermostat $20

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4805.jpg

OEM Z32 MAF, almost new $100

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4729.jpg

SR CAS $100

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4791.jpg

New ECU Coolant Temp Sensor $20

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4788.jpg

New OEM Fat Oxygen Sensor $80

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4785.jpg

SR Ignitor $80

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4804.jpg

SR TPS $50

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4803.jpg

SR Coil Pack set $85

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4812.jpg

Turbo locking tabs: 2 SOLD, 2 left $10

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4824.jpg

Stock T25 inlet/outlet elbows $20

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4823.jpg

Bando SR belt set, ac, alt/wp, ps $30

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4814.jpg

OEM exhaust manifold gasket $5

http://i239.photobucket.com/albums/ff177/Z28ricer/Beausparts/IMG_4813.jpg

[duynguyenn240]

ill take the greddy oil cap $35 shipped to 76014 pm me your paypal ?

[240Zfunahollic]

pm'd msglngth

[1gr8bar10der]

I also PM'd you on TR about some parts. Can pick it up as soon as tomorrow. LMK

[240ND]

how much for the DSS driveshaft shipped to 58701? I can paypal anytime and need that driveshaft!
shoot me a pm thanks!

[duynguyenn240]

money send for the oil cap thanks

[Hyphymode]

pm about clutch/flywheel kit and greddy oil cap. Need asap.

[chituntang]

Dif stainless clutch hose $20
New OEM exhaust manifold nuts and spacers $25
Turbo to manifold gaskets $10
Turbo Hardware Assortment, 7 studs, 10 copper locking nuts, 2 stainless nuts $30
Turbo outlet gasket $10
Turbo locking tabs $20 for all 4 ($10 for 2?)
Fuel rail to intake manifold orings $15
New OEM PCV Valve $10

Maybe interested:
Nismo Clutch Fork Pivot $25
Greddy Oil Cap $35

Shipping to GA,30044. Will buy the interested parts if we can make a good deal.
Can I get the gasket that you have form the 2871R your are selling?

[92RMS13]

BUMP #1

need this stuff gone!

[hulkster_s13]

ill take the hotpipe w/o bov with flange if you still got it. pm shipped to 96744 and paypal

[vqboodah]

how many miles have you put on it?

[handinpants]

whats up with the inkectors

[penco]

Could you update it with the parts that were sold..im interested in a few things.

[racerx2k1]

Last Activity: 08-15-2010 10:18 PM