PDA

View Full Version : air\fuel gauge hook up


Driftin_240sx
07-29-2003, 08:01 PM
i just bought a autometer air fuel gauge and i am wondering if anyone know the wire to splice into for the 02 sensor... i thought i heard somewere there were more than one wire comming out of the 02 sensor.. i would go look outside but unfortunatly its 9pm and dark out and i cant wait untill tomarow to look :)

david

Kreator
07-29-2003, 09:56 PM
search and u should be rewarded

white wire is the signal. Track to whichever wire it mates on the harness, and tap the harness.

Driftin_240sx
07-31-2003, 12:06 PM
ok so i was looking at it... and there is a green wire comming right out of the 02 sensor, put it there? and i folowed it to the harness bu it still in a think plastic covering and i didnt want to cut into it and then cut some ****.. so anyone with experience with this , instead of the "search" answer it would be appreciated.. and yes i did search.


david

Tictakman
07-31-2003, 04:28 PM
hey i just did mine and it works fine. i did what you are talking about. i tapped right into the green wire that is coming out of the o2 sensor. i cut off the end of the plug, bought a new one just like that and twisted the 02 sensor wire and the a/f guage wire together then crimped them both. then plugged it right back in.

not hard at all