PDA

View Full Version : 5 speed install problems


Silvia180SX
07-28-2003, 04:56 PM
I'm installing a 91 KA and 5 speed in my formerly auto 89 240sx. I can't get the car to start. I've read the S14 swap pages but they are no help. The wiring has got to be my problem but I can't make it work. Anyone else done this on their 240?

Kid Zelda
07-28-2003, 05:16 PM
hehe,

look at the fuse box by the battery, check under it, you'll find a two pin connector, colors (iirc) are blk/white and blk/yellow, splice them together.
should fire up
:)

Silvia180SX
07-28-2003, 05:53 PM
I have that connector pluggen in. I swaped over the M/T transmission harness as well so everything seems to be OK as far as the starter circut. It just won't work. I did notive a blue wire that was attatched to my old ECU, does that have to be hooked up to the new ECU?

Silvia180SX
07-28-2003, 09:59 PM
I took the engine fuse box cover off and noticed that the alt. 75A fuse was broken. I replaced it and then put the neg. terminal back on the battery and pop! It hapened again. Something isn't wired right, and help would be apriciated thanks.

fast-datsun
07-29-2003, 08:43 AM
You need to wire in the clutch switch to the exsiting netural safety switch so the computer can allow the starter to work..

Silvia180SX
07-29-2003, 10:40 AM
how? And that still doesn't explain the fuse blowing

tastyratz
05-31-2004, 11:12 AM
i need to know how to wire that in also...

stock240_1980
05-31-2004, 08:45 PM
I had the same problen when I did my swap. Take the alternator off and look at the place where the power cable is screwed on. There should be a plastic washer thing on there. If the theres not then it will blow the main alt fuse. Try this and let us know. P.S. It sucks too. Those fuses are $18 from nissan and I went through 4. :duh:

crioten
05-31-2004, 11:51 PM
check your grounds...i had a problem with my starter wires hitting my intake manifold and it sure as hell shocked the shit out of me when my friend turned the car over...

mjjstang
06-01-2004, 01:55 PM
if you guys are asking how to wire that connector behind the fuse box, SEARCH SEARCH SEARCH, I cant be too harsh as ive written a few threads asking that but search for a thread started by me a while back about 5 speed or something, somebody posted pics of it.