PDA

View Full Version : CA brand new forged 5" lips work vs-xx work rezax work equip


don henley
07-22-2010, 02:33 PM
I got this brand new set of 5" lips.. fully forged AND polished..

40 bolts these will bolt RIGHT UP to your vs-xx equip rezax etc..

Only problem is you will need to run a tiny valve stem that does not come through the face.. the holes don't line up where the cut out is..

$1200 picked up FIRM $1300 shipped FIRM

http://i46.tinypic.com/mujux0.jpg

Example of wheels I've relipped..

http://i31.tinypic.com/2ut3p5g.jpg

http://i30.tinypic.com/31368g8.jpg

lakerschamp2000
07-22-2010, 06:22 PM
my 2 sets of work vs-xx wheels have 45 holes, can you double check them again, i might take them if they are 45 holes

ez22
07-22-2010, 11:37 PM
What is the diameter?

don henley
07-23-2010, 03:49 AM
They are 18" haha sorry!

BTW I don't know what kind of bunk VS-XX you have but 18s are 40 bolts and 19s are 44.. same goes for the rezax equip emitz meister and a long long list.

ALEXTHESUS*PECT
07-23-2010, 01:22 PM
so can you tell what the offset was before and after you did this so i know what i'm looking at here. also can you show me pics of the air stem you are referring to?
http://i30.tinypic.com/31368g8.jpg

ILLES13
07-23-2010, 03:43 PM
Lips bigger than topanga's lol....

hailandkill
07-23-2010, 04:05 PM
where do you order these lips from?

glws

don henley
07-23-2010, 05:32 PM
so can you tell what the offset was before and after you did this so i know what i'm looking at here. also can you show me pics of the air stem you are referring to?


Went from 18x9.5 +45 to 18x11.5 +19.. the stem I'm referring to can be any.. little ones like the Ray's valve stems will work or you can just use your original 90ยบ stem and turn it backwards like a valve stem "tuck" hahaha

You can see more pictures of the white Rezax on the green S2000 with the glow in the dark rezax..these are the same wheels that I had done for him.. white in the daytime green at night..

1990zdrivr
07-27-2010, 10:17 PM
ive got Work Equips 18x9+35...any idea what they'd be at with these lips???and also, are you willing to pair em out??? i only need two seeing as my other Equips are 18x10+22 so those would go in the front....if so how much shipped to 98057???

don henley
07-27-2010, 11:32 PM
Honestly bro I have no idea because you need to know the size your existing lip.. I can sell you two for 700 shipped..

GabeS14
07-28-2010, 12:09 AM
Honestly bro I have no idea because you need to know the size your existing lip.. I can sell you two for 700 shipped..

hope this doesnt sound like a dumb question, but cant you just get a new hole made to fit the air stem?

don henley
07-28-2010, 12:23 AM
Yeah you could do that, but that costs money and we all know zilvians don't like spending money..

Rasty180SX
07-29-2010, 01:11 PM
Damn..if these were 20's I'd be all over it!!! GLWS. 5" lips...baller!!!

don henley
07-29-2010, 02:32 PM
I can get you 20" lips but they're not gonna be the same price.

don henley
08-02-2010, 05:50 PM
Widest I can get you is 7" for 19s and 20s.. Maybe even 18s.. costs a pretty penny for that kind of lippage..

GabeS14
08-04-2010, 10:39 AM
I'm curious if these are custom lips or original from work?
I didnt know that lips alone were orderable, i have tried a few different companies before and they all said no.


Sent from my iPhone using Tapatalk

don henley
08-04-2010, 12:10 PM
These are not from Work. These are all custom made.

You actually CAN order new lips from Work but they are $4XX per lip.

Ktown_drifter
08-09-2010, 05:28 PM
yea 4XX - 5XX a lip from Work... Damn these are tempting.. Would bump mine effectively to 18 x 12 +6

amonsta
08-10-2010, 07:35 AM
Sick!! Wish these would work on my ssr sp1s!!!

amonsta
08-12-2010, 06:28 PM
You wouldnt happen to have any 4 inch lips laying around would you?? I counted the holes on my ssr sp1s and its 40. So these may work but I wanted to go from a 18x9 plus 37 to like a 18x10 plus 20

don henley
08-12-2010, 06:45 PM
I'm not sure if you can see the pictures, but I have a reverse lip.. You have a stepped lip. You'd need faces out of a 19" set to mate with my 18" lips.. Or you'd have to get a custom step ring made because your face will not bolt to my lips.. A stepped lip makes the diameter 1" larger.

lsvtec
08-12-2010, 09:03 PM
Widest I can get you is 7" for 19s and 20s.. Maybe even 18s.. costs a pretty penny for that kind of lippage..

can you get (2) 5"LIPs for 19" work vs-xx? if so, how much for pick up

amonsta
08-12-2010, 09:39 PM
I'm not sure if you can see the pictures, but I have a reverse lip.. You have a stepped lip. You'd need faces out of a 19" set to mate with my 18" lips.. Or you'd have to get a custom step ring made because your face will not bolt to my lips.. A stepped lip makes the diameter 1" larger.


Dam! I didnt even pay that any attention!!! I guess its back to the drawing board for me!

k0013
08-18-2010, 05:54 PM
do these work for veilside wheels as well

don henley
09-04-2010, 02:55 PM
All talk no money..

ruslan98270
10-18-2010, 10:04 PM
could you sell just a pair?

txt me 425 319 3481

Thanks

don henley
10-19-2010, 05:22 PM
please msg me @ 949 923 1863 for further inquiries! all pms replied, etc etc.

element360
10-19-2010, 10:10 PM
bump for a great seller, bought my algernons through him off a diff forum

boosted RE
11-14-2010, 10:29 AM
How much for a pair(2) of 5" lips shipped to 60647? Also what is the biggest lip that you can get for 18's. Thanks.

don henley
12-06-2010, 08:01 PM
Please don't PM me if you're only browsing guys.. BTW I can get you a stepped lip now so all of you who hit me up please feel free to msg me again

949 385 1504

roddy
12-06-2010, 08:42 PM
do you make lips for 17s vsxx? i have 8.5 +41 // 9.5 +41. i'd wanna turn the wheels into 9.5/10.5 low 30offset

don henley
12-14-2010, 12:00 AM
Action jackson

racerx2k1
12-14-2010, 10:02 AM
All talk no money..

please msg me @ 949 923 1863 for further inquiries! all pms replied, etc etc.

Action jackson

2 bump limit. You can start new thread in 3 days.