reflexdb
07-21-2010, 08:11 PM
Location: Columbus, OH
Description: Full Evo Brembo conversion kit for 240sx S13/S14 w/ 5-lug hubs. Calipers are from Mitsubishi Evo 8/9. They are in good condition. One caliper has the common clearcoat bubbling problem - purely cosmetic. Brackets were purchased here on Zilvia. Unfortunately, after I bolted them up and drove about 20 miles, I realized that the Brackets were misaligned and the rotors were making minor contact with the calipers. So, the brackets will need a bit of sanding/grinding to fit flush to the caliper. I didn't have time to wait, so I went another direction and now these are up for sale. I took detailed pictures of the inside of the calipers where the minor contact occured - it shouldn't affect performance in any way. Also, I had the rotors resurfaced to like new condition. Rotors were brand new before resurfacing. Pads and Lines are new as well. Plus, I'll toss in the hardware and some 5mm spacers (I needed them to fit behind 17x8 5Zigen FN01R-C +35 wheels).
The cost that I paid...
Calipers: Evo Brembos - $400
Rotors: Girodisc "Bailout Special" Blanks - $150
Pads: Girodisc Magic Pads - $85
Lines: SPL Stainless Steel w/ banjo fitting - $45
Brackets: Zilvia-spec - $100
TOTAL: $830
The cost that you pay...
Price: $700 + Shipping (honestly, I think that shipping will be expensive due to the weight, so I'd like to find a local buyer if possible.)
Payment Method: Cash, Paypal
Pictures:
Photobucket slideshow. 20 detailed pictures.
Image hosting, free photo sharing & video sharing at Photobucket (http://s832.photobucket.com/albums/zz243/reflexdb/Brembo%20Evo%20Brakes%20FOR%20SALE/?albumview=slideshow)
Description: Full Evo Brembo conversion kit for 240sx S13/S14 w/ 5-lug hubs. Calipers are from Mitsubishi Evo 8/9. They are in good condition. One caliper has the common clearcoat bubbling problem - purely cosmetic. Brackets were purchased here on Zilvia. Unfortunately, after I bolted them up and drove about 20 miles, I realized that the Brackets were misaligned and the rotors were making minor contact with the calipers. So, the brackets will need a bit of sanding/grinding to fit flush to the caliper. I didn't have time to wait, so I went another direction and now these are up for sale. I took detailed pictures of the inside of the calipers where the minor contact occured - it shouldn't affect performance in any way. Also, I had the rotors resurfaced to like new condition. Rotors were brand new before resurfacing. Pads and Lines are new as well. Plus, I'll toss in the hardware and some 5mm spacers (I needed them to fit behind 17x8 5Zigen FN01R-C +35 wheels).
The cost that I paid...
Calipers: Evo Brembos - $400
Rotors: Girodisc "Bailout Special" Blanks - $150
Pads: Girodisc Magic Pads - $85
Lines: SPL Stainless Steel w/ banjo fitting - $45
Brackets: Zilvia-spec - $100
TOTAL: $830
The cost that you pay...
Price: $700 + Shipping (honestly, I think that shipping will be expensive due to the weight, so I'd like to find a local buyer if possible.)
Payment Method: Cash, Paypal
Pictures:
Photobucket slideshow. 20 detailed pictures.
Image hosting, free photo sharing & video sharing at Photobucket (http://s832.photobucket.com/albums/zz243/reflexdb/Brembo%20Evo%20Brakes%20FOR%20SALE/?albumview=slideshow)