PDA

View Full Version : MI FS: ***SR20DET Red Top Swap!***


Magical Trevor
07-21-2010, 08:01 PM
So I'm moving on to something bigger and a lot more mean than the SR. Maybe RB, LSX... not really sure. Just want something with more power. I'm putting my red top SR20DET complete swap up for sale.

Here's the run down..

Red Top SR20DET:
Fresh rebuild with OEM pistons, rods and rings.
Rebuilt head with OEM seals, valves and springs.
Greddy RAS
Circuit Sports pulleys

Exhaust:
S14 SR T28 BB turbo
Megan turbo manifold
Megan elbow
Megan downpipe
Circuit Sports SS lines

Intake:
Custom FMIC kit with aluminum piping
OEM BOV
Greddy/Freddy intake manifold
Custom turbo intake

Electronics:
Here's what I have to offer, I have two separate upper and lower harnesses. One is setup for a Z32 MAF and one is setup for an Apexi PFC D-Jetro.

Wiring Specialties S13 SR - S14 Chassis upper and lower wiring harness. (Z32 MAF)
D-Unit S13 SR upper and lower wiring harness (PFC D-Jetro)

Apexi Power FC D-Jetro with commander.
PFC MAP sensor kit
PFC IAT kit

Either one of these harness can be converted for the PFC or the Z32 MAF. You choose which one you want. The Wiring Specialties harnesses will be priced accordingly because they are BRAND NEW and have virtually no run time on them.

If you choose the Z32 MAF harness I will include a Z32 MAF.

Cooling:
Custom upper coolant pipe for KA radiators
Lower coolant hose.
Heater core hoses (in and out)

http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture003.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture004.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture005.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture010.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture007.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture008.jpg

http://i3.photobucket.com/albums/y63/krnhckr/Picture006.jpg


The only 2 flaws that I can pick out,

1. The valve cover is scratched and nicked... not sure how much that matters to some.
2. The CAS plug is cracked but still seals and "clicks" when the harness plug is plugged in.

http://i3.photobucket.com/albums/y63/krnhckr/Picture009.jpg

At this point NOT I'm willing to part out anything off the engine. The only things I'm willing to part with are the FMIC kit, the Power FC and one of the harnesses. This way I can still sell the engine set with a harness and you can pick up your own FMIC (which are everywhere).

http://i3.photobucket.com/albums/y63/krnhckr/Picture0011.jpg


Yes I am willing to ship the engine/trans/etc
Probably more I'm leaving out. If you have any questions PM me.

$3500 obo

I don't have to sell this as a whole, but I'm not going to part out small things like injectors and turbo lines. Make offers on things, worst case all I say is no.

mau5trap
07-21-2010, 08:04 PM
how much for the Front mount? shipped to 90638

JDMmuscle
07-21-2010, 08:08 PM
how much For everything?

Magical Trevor
07-21-2010, 08:19 PM
Which combination do you want.... or do you want EVERYTHING... both harnesses, FMIC?

For everything listed $3500 + shipping

Magical Trevor
07-21-2010, 08:35 PM
how much for the Front mount? shipped to 90638
I'm going to let the sale ride for a few days to see who's interested and then I'll start taking a few things off.

Magical Trevor
07-22-2010, 07:04 AM
Bump for the morning crowd!

RHDskyline
07-23-2010, 01:13 AM
free BUMP cause i want the engine but can't afford it


:)

Magical Trevor
07-23-2010, 12:07 PM
We can work out different packages. $3500 is for everything. Both harneses MAF setup, PFC setup, FMIC. You can pick and choose what you want and don't want.

240sx123$
07-23-2010, 12:41 PM
PM a price for the wiring specialties redtop to s14 harness. Wired for a/c and abs?

Magical Trevor
07-23-2010, 05:55 PM
Yes it is wired for every option available. I'll PM you when I get to a computer. My blackberry doesn't like PM's.

holemilk00
07-25-2010, 03:41 PM
Bump for a good motor set and a great guy. Plus I need the room back in my garage.

Magical Trevor
07-27-2010, 07:07 AM
Bupm for the morning crew.

Magical Trevor
07-29-2010, 07:44 AM
I have replaced the valve cover with another red one that isn't as damaged as my original. I will have pictures with the new valve cover and of the engine and trans out of my car.

Magical Trevor
08-05-2010, 09:15 AM
Bump, updated my first post.

holemilk00
08-05-2010, 06:54 PM
Just to clarify, there wasn't any real damage to his valve cover, it was just scratched, and since I was getting mine powder coated and it was in almost perfect shape, I switched him. Not trying to thread jack Trev, it just sounded like the valve cover was truly damaged the way you said that.

racerx2k1
08-06-2010, 07:51 AM
Bump for the morning crowd!

Bupm for the morning crew.

I have replaced the valve cover with another red one that isn't as damaged as my original. I will have pictures with the new valve cover and of the engine and trans out of my car.

Bump, updated my first post.

2 bump limit. You can start new thread in 3 days.