S14 and SR20 parts

[phunc]

Sort of a garage clean-up/I'm broke as shit sale. All prices are OBO. I'll check this thread very often, so reply here or PM me. Shipping on bigger items will be a pita and relatively costly, but I'm sure we could work something out. If you want more pics of an item don't hesitate to ask. Thanks for checking out my thread! :wavey:

Driveshaft Shop one piece aluminum driveshaft. Used in my 95 240sx WITH ABS, with an S14 SR20. The black marks are from the e-brake cable rubbing against it until I fixed the cable. Asking price: $250

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0278.jpg


Megan Racing exhaust manifold for S14 SR20. Bit of surface rust and discoloration but I'm sure it would clean up nicely. Asking price: $50

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0269.jpg

Greddy fuel rail/fuel pressure regulator adaptor for SR20. -6AN conversion. Asking Price: $15

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0271.jpg

Rubber clutch slave cylinder line. Never used, great shape. Asking price: $15

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0272.jpg

No name 3 in high flow catalytic converter. Never used. Asking price: $100

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0273.jpg

AEM Fuel Pressure regulator. Asking price: $150

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0274.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0275.jpg

S14 SR20DET valve cover. As you can see in the pics the paint is chipping off, so you'll probably want to paint this or do something with it. All the bolt hole tab things are intact, nothing else is wrong with it aside from the paint. Asking Price: $50

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0276.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0277.jpg





Apexi exhaust for S14 SR20 in a '95 240sx. Either the N1 Evo or GT Spec. Asking price: $300

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0283.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0284.jpg

95/96 S14 headlights. Got these a couple years back, I believe they are from a european 200sx. The lenses are plastic and very clear. The tabs do not line up perfectly with the 240sx, only the outside bolts will actually attach. No broken tabs and they are in great shape. Asking price: $100

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0286.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0287.jpg

S14 SR20 starter. Worked perfectly when I was using it. Asking price $75

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0263.jpg

S14 SR20 alternator. Worked like a charm. Asking price: $75

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0266.jpg

Koyo radiator with Flex-A-Lite fans, also with the controller with temperature probe. Asking price: $400

http://i4.photobucket.com/albums/y122/Xantcha_/Picture019.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/Picture020.jpg

I also have all these parts from the engine. Let me know what you want and offer a price. The cams are Tomei 272s, they're in decent shape but have been sitting in a barn for about a year. Not sure if you can machine a camshaft, but you'd probably have to do that if you wanted these. The crankshaft has been machined. If you're interested in that let me know and I'll measure it for you.

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0248.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0249.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0251.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0252.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0250.jpg

The block was bored and sleeved. When the engine overheated the sleeves sunk down just a bit. They've sunk just enough that you could catch your fingernail on the edge. Also note the hole in the transmission mounting area where a too long bolt was used. Obviously will need some machine work to get back up to snuff. If you're interested, let me know and I can measure the ID of the sleeves.

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0254.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0255.jpg
http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0256.jpg

The head may or may not be warped. Looks straight enough and isn't warped ridiculously if it is at all. Again, wysiwyg.

http://i4.photobucket.com/albums/y122/Xantcha_/DSCN0253.jpg


Thanks for looking. If you don't like a price, make me an offer. Worst that will happen is I'll say no and make a counter offer.

[hockeyrules]

how good of condition are the oil baffles and the crank pulley? and an I get a price shipped to 85382?

[Napalm]

will you part with the oil drain/return piece on the t-25? pm me if so

[markapple0507]

damn im interested in the driveshaft. just a little low on cash. how much shipped to 79912. pm me please thanks

-Mark

[Napalm]

Bump for you bro! THANKS! Rep left

[blazter1]

sent pm check you mail

[SWAT Team S14]

damn, wish that driveshaft wasn't for ABS....otherwise i'd grab it.

[msanchez]

Interested in the z32 mad pigtail. Shoot me a pm with a price shipped to 95843.
Thanks!

[phunc]

first bump, please don't be afraid to make offers on stuff if you don't like the price!:w00t:

[240sx123$]

What does "wysiwyg" mean?

[phunc]

"What you see is what you get"

[240sx123$]

Ah, gotcha. Couldnt for the life of me figure that out, haha.

$40 shipped + paypal for the rad hoses? 18976.

[zkrobs4]

I need that head, do you also have an extra exhaust valve?

[a-s-silvia]

what do you want for the pistons??

[phunc]

last bump___________

[dhherrmann]

Condition of the crankshaft?
Price for the crankshaft? shipping costs to Friendswood, TX 77546?

[[email protected]]

Hey I'm very interested in your power fc if you still have it let me know my email is [email protected] or pm me a price shipped to 22003 is the power fc d-jetro or l-jetro thanks.

[summit2g2]

Nice Exhaust Manifold

[jarend]

thanks for the pistons and rods phunc! my mechanic says they look like they are in great condition. Legit guy here with legit parts. :bigok:

[teh smithers]

You've got mail.

[casten01]

upper oil pan? u still selling it?

[ilwhipuras]

pm sent.....