View Full Version : firewall hole
silvia14
07-27-2003, 01:12 PM
any chance there's a hole on the firewall that i can use to do the edfc wiring? i just dun want to drill one.
that's for a s14.
thanks.
radrex88
07-27-2003, 01:31 PM
I am almost positive that there is, just go look, and take a flash light. Happy hunting.
aeontony
07-27-2003, 04:21 PM
It'll be painful, but here's what I did..
Go near your clutch master cylinder. Notice where the harness enters into the car? There's a grommet protecting it that you can tear a little, and string some stuff through. It took me many hours, many wounds, and much cussing...
the head
07-28-2003, 08:09 AM
if you remove your ac and heating system you can use the ac condenser drain tube
Maeda
07-28-2003, 02:15 PM
Depends on what your trying to run through it...
In my case to run a few gauges the existing holes where not big enough so I just drilled my own... Find a dimple and knock on it, then try and find the same place on the other side of the firewall under the carpet and layer or rubber crap. There not much info on this even if you search so I recommend just going for it and seeing what you can find. Find or borrow a small drill too, because it hard to fit a decent drill next to the exhaust mani...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.