PDA

View Full Version : NC Brackets for 350Z Track Rotors with Wilwood Calipers

2Fass240us
07-15-2010, 01:49 PM
I had a batch of these made and have one pair left. They allow you to run 350Z Track rotors (12.76"/324mm x 1.18"/30mm) on the front of an S-chassis with Wilwood Superlites. The Superlites need to be lug-mount and for 1.25" rotors.

The other parts you'll need:
2x 980250 Raybestos 350Z Track rotors...........................$170 shipped
1x 120-7431-R FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping
1x 120-7431-L FBSL Caliper, 1.38" pistons, for 1.25" rotor.....$166 w/o shipping
1x 15E - 6084K Polymatrix E pads, set of 4.......................$88 w/o shipping
1x 220-9199 Wilwood SS brake line kit w/adapters..............$60 w/o shipping

Pad type and piston size / number are a function of the car, rear brake choice, and (to some degree) master cylinder size. Please PM me with your current setup and I can help you pick the right parts.

http://i116.photobucket.com/albums/o20/2Fass240us/Project_240/Brakes/350ZTrack/BracketV2_001.jpg
http://i116.photobucket.com/albums/o20/2Fass240us/Project_240/Brakes/350ZTrack/BracketV2_002.jpg

The following are of the v1 brackets installed. Fitment is exactly the same.
http://i116.photobucket.com/albums/o20/2Fass240us/Project_240/Brakes/350ZTrack/BracketV1_003.jpg
http://i116.photobucket.com/albums/o20/2Fass240us/Project_240/Brakes/350ZTrack/BracketV1_005.jpg
http://i116.photobucket.com/albums/o20/2Fass240us/Project_240/Brakes/350ZTrack/BracketV1_007.jpg

$180 shipped in the Continental U.S.
PayPal only please
PM with questions

-Andy
2Fass240us
07-28-2010, 07:44 AM
FWIW, one of the biggest advantages of these over Z32 calipers is cheaper pads. Take Hawk pads for example (Summit prices):

_____________Z32_________Superlite_________Savings
Blues________$188__________$128_____________$60
HT-10_______$195__________$128_____________$67
DTC-60______$203__________$160_____________$43
HP+_________$117__________$88______________$29
HPS_________$88___________$84______________$4

I should also mention that there is no pad overhang like with 350Z Track rotors, Z32 calipers, and JSK (or similar) brackets. The fact is that the 350Z Track rotor is too large a diameter for the Z32 calipers.
McCoy
07-28-2010, 11:22 AM
To help Andy's sale on the brackets, I have a pair of the 350Z track rotors listed above NIB for sale. $135 plus shipping.

http://www.prmsg.org/albums/monty_mccoy/r1concepts_Z33_brembo_rotors.jpg
2Fass240us
11-19-2010, 10:59 AM
bump _
2Fass240us
02-22-2015, 11:45 AM
bump...have another set available
2Fass240us
10-12-2016, 06:48 AM
Bump, another set available. $180 shipped in the ConUS
RalliartRsX
10-12-2016, 07:02 AM
Great setup! If you shop around, these can be had for pennies.

When I went to this setup, I got some severely good deals

Set of Wilwoods 1.63" 4 piston Superlite: 150 shipped to my door (need the brake line threads to be chased.). They are pretty cheap used off Ebay
Set of 350Z rotors BNIB (off Zilvia actually): 110 shipped to my door (again, Ebay if your friend)
LInes: Free as I had a set Sentra/Wilwood lines that fit perfectly: Free
Pads: 70 shipped from Ebay.

So 180 + 150 + 110 + 70 = $510 (minus whatever I sold the stock setup for).
2Fass240us
10-12-2016, 08:18 AM
Great setup! If you shop around, these can be had for pennies.

When I went to this setup, I got some severely good deals

Set of Wilwoods 1.63" 4 piston Superlite: 150 shipped to my door (need the brake line threads to be chased.). They are pretty cheap used off Ebay
Set of 350Z rotors BNIB (off Zilvia actually): 110 shipped to my door (again, Ebay if your friend)
LInes: Free as I had a set Sentra/Wilwood lines that fit perfectly: Free
Pads: 70 shipped from Ebay.

So 180 + 150 + 110 + 70 = $510 (minus whatever I sold the stock setup for).nice, thanks

A BBK for $510 is stupid cheap. Even for 240 owners. ::ducks::
slideways2004
10-12-2016, 08:56 AM
I had these on my old car and they are great!

The calipers are really light. Rotor is heavy unless you go with a 2 piece. I bought rotors off rockauto and they were even cheaper.

For what it cost, its really cheap for high quality brand new parts that work and look awesome!
2Fass240us
10-12-2016, 09:11 AM
I had these on my old car and they are great!
...
For what it cost, its really cheap for high quality brand new parts that work and look awesome!thanks!

The calipers are really light. Rotor is heavy unless you go with a 2 piece. I bought rotors off rockauto and they were even cheaper.That's where I bought my rotors too.

Two-piece rotors aren't cheap but will save about 8 pounds per rotor with the ConceptZ/Akebono rotors for $500 (https://conceptzperformance.com/sale-czp-akebono-2-piece-rotor-set-slotted-2pc-front-22lb-40.ak01.s_p_14072.php) or 5 pounds per rotor with the Z1 Motorsports ones for $488 (https://www.z1motorsports.com/brakes/z1-motorsports/z1-piece-brembo-front-rotors-p-7373.html).