post pics of engine bay

[halyoder]

i was wondering what everyone has done to there engine bays and engines to make them look nicer here is a pic of mine. it needs help!!!!!!http://www.imagestation.com/picture/sraid60/pa9ed964fcb2ebee6094122b100f8b964/fc4e9614.jpg http://www.imagestation.com/picture/sraid60/p5dbacf54ee563be0dd856661791706de/fc4e9526.jpg

[Anubis]

man, your engine bay needs serious help. Its probly the worst i have ever seen! OMG its so ugly! ;)

[JuJuBee]

whatever that red thing is on the engine...that that crap off....ruins the whoe entire bay

[Bill Roberts]

I would start by removing the boneyard markings on the headlight housings and the head cover. Next, you could shorten and teather that vac line beside your intake hose going to your turbo. Clean the top of your brake fluid resv. (cap) Clean the area in front of the radiator and repaint the radiator truss to get all that white overspray off of it. Clean all the residue off the PS resv. and clean the cap. I don't know if it is just "me" but the inside of the fenders where they meet under the hood look kinda grimey on the passenger side. I also would look at running the breather hose under the throttle cable...if you have the slack and it does not rub the head cover. Clean the battery and the passenger strut tower to shine like the drivers side. When you tie everything down with clips or teathers, make certain their is enough slack so that when you torque the engine, you do not pull a vac hose off from it being tied down too tight..leave some slack but neat.

I could probably critique a lot more detailed if I saw some close-ups of the passenger side. Looks like the battery is unhooked from thos pics..but these old eyes do better in person.

Looks good, just some fine detail now and you will be set!

Hope this helps you somewhat..