The, i have a young daughter and angry wife sale

[bradystrib]

Well I have a ton of stuff I need to get rid of...well a good bit. Anyways, prices do not include shipping. Most stuff should be cheapish to ship. Best way to contact is email [email protected] most offers will be entertained if not accepted.

KA-T Stuff
Sr20det t25g pulled from a ~45k mile s13 blacktop --- $160
t25 inlet and outlet pipes included with turbo
Isis RS3360 Turbocharger (brand new) --- $400 SOLD @$400 shipped
Ebay bottom mount t25 flange manifold (Brand New)---$70
Ebay divorced turbo outlet (brand new) --- $30
Ebay intercooler kit used in blow through set up with all pipes and couplers --- $80
Ebay 3'' downpipe -- $60
Prof Sheepdog BOV with 2.5'' or 2.25'' tube ---$125
TurboX's RFL on subaru flange --- $60
Skullworks KA oil block adapter (anodized blue and brand new) --$125 SOLD @ $115 shipped
HTP billet z32 maf adapter (red one in pictures) -- $35
Z32 maf with pigtail --- $80
STi Yellow side feed 550cc injectors --- $160 SOLD!
Walbro 255lph fuel pump (brand new) w/ s13 install kit --- $80 SOLD
Competition Ka24de Stage 4 clutch (brand new in box) --- $350
Braided steel covered vacuum line 5/16'' maybe -- 3 lines -- $10
Greddy Full Auto Turbo Timer ---- $40 SOLD

(4) 5x114.3 25mm bolt on spacers --- $80 SOLD
Boss Style s13 hub kit for steering wheel (new in box) ---$15 SOLD @ $10
OEM S13 non cruise steering wheel -- $20

Gauges-
Autometer Cobalt Electrical full sweep 2 1/16'' gauges
Boost gauge with new harness and old map sensor --- $100
Oil pressure gauge with new harness and new sensor --- $120
Water temp gauge with new harness and new sensor ----$80
Wideband o2 sensor with new sensor and harness ---- $225
DPIC gauge ---- $80
D.P.S.S. ---- $80
Fuel Pressure Gauge no sensor no harness --- free with purchase of any other cobalt gauge
Pyrometer with harness and probe --- $60
Cobalt mechanical oil pressure gauge (new in box with autometer copper line kit as well) -- $40


Stewart Warner silver face gauges (mechanical)
Boost -- $30 SOLD
Water Temp no sensor ---- $20 SOLD
Volt ---- $20 SOLD
all for $50 SOLD @ $40

AEM Wideband GAUGE ONLY --- $45 ---- SOLD @ $35
OEM Subaru STi boost Lamco gauge --- $50


Wheels ---
(4)Hamman 18'' HM2 wheels 18x8.5 +38 fronts and +13 rears 5x120 bolt pattern --- $700

(4)Ford 06-07 f150 HD edition 22'' wheels 6x135 --- $500

(4)Ford Mustang 16x7 OEM Pony wheels with spinner style center caps --- $250

(4)Diamo 18x7.5 wheels 5 lug --- $300

(4) Lexani 18x7.5 Firestars one is missing ceter cap --- $400

(2) BBS RX 17x9 +27 painted gold --- $300

Snap On 3 drawer locking top tool box originally 800 new --- $400

http://bradystribling.com/summmersale/DSC_9147.jpg

http://bradystribling.com/240partout/content/bin/images/large/DSC_7173.jpg

http://bradystribling.com/requstzilvia/DSC_9193.jpg

http://bradystribling.com/requstzilvia/DSC_9196.jpg

http://bradystribling.com/requstzilvia/DSC_9198.jpg

http://bradystribling.com/requstzilvia/DSC_9206.jpg

http://bradystribling.com/requstzilvia/DSC_9207.jpg

http://bradystribling.com/summmersale/DSC_9148.jpg

http://bradystribling.com/240partout/content/bin/images/large/DSC_7183.jpg

http://bradystribling.com/summmersale/DSC_9152.jpg

http://bradystribling.com/wp-content/uploads/2010/05/DSC_8830-1024x685.jpg

http://bradystribling.com/summmersale/DSC_9150.jpg

http://bradystribling.com/summmersale/DSC_9139.jpg


http://bradystribling.com/summmersale/DSC_9153.jpg

http://bradystribling.com/wp-content/uploads/2010/05/DSC_8865-1024x685.jpg

http://bradystribling.com/240partout1/content/bin/images/large/DSC_7595.jpg

http://bradystribling.com/240partout1/content/bin/images/large/DSC_7596.jpg

http://bradystribling.com/summmersale/DSC_9129.jpg
http://bradystribling.com/summmersale/DSC_9136.jpg
http://bradystribling.com/summmersale/DSC_9124.jpg

[Katsumbhong]

PM me pics of spacers?

[drftx]

more info on the bbs rx

[Fonix36]

free bump like the stuff

[bradystrib]

more info on the bbs rx
whasort of info you need on them? Pretty much all i know is that they are 17x9 +27 offset. 2 of them is all I have. Spray painted gold. Paint is flaking, tires on them are SHOT.

[sickmade]

Are the sti injectors plug and play with the with the sr harnesses or do i need the plugs and wire from the Subarus injectors to run them on the sr?

[bradystrib]

Are the sti injectors plug and play with the with the sr harnesses or do i need the plugs and wire from the Subarus injectors to run them on the sr?
the injectors slide right into the rail. however the harnesses you either have to cut off 1 clip on the OE harness or you can wire in subaru harnesses.

[ka-turbo]

hey ill take the fuel pump...but i would like to know how many miles u have used it for and what all it comes wit..what size sock....but other than that e-mail me at [email protected] for a faster response....asap

[bradystrib]

hey ill take the fuel pump...but i would like to know how many miles u have used it for and what all it comes wit..what size sock....but other than that e-mail me at [email protected] for a faster response....asap
fuel pump is brand new. never used. and comes with the s13 install package and sock.

[Rbboost'd_240]

Bolt pattern on firestars?

[bradystrib]

Bolt pattern on firestars?
5x114.3 and 5x100 sorry forgot to add that :D

[z32smurf]

great guy and good seller!! thanks for the smooth transaction

[Rbboost'd_240]

Emailed you about the blow thru piping and wheels

[bradystrib]

great guy and good seller!! thanks for the smooth transaction
indeed sir. thanks again!

[Trent J]

may be interested in the spacers and z32 maf. shipped to 38672???

[bradystrib]

may be interested in the spacers and z32 maf. shipped to 38672???
pm'd good sir.

[redline240sx]

Pm me about the intercooler piping please if still available, 3inch piping?

[bradystrib]

intercooler sold locally. sorry.

[Napalm]

Thanks for the gauges! BUMP FOR YOU BRO!

[ie3.0]

whats the condition of the spacers?
does all the studs work perfectly? and if possible what brand are they?
i m really interested.
lmk thank you and GLWS for the rest.

[bradystrib]

whats the condition of the spacers?
does all the studs work perfectly? and if possible what brand are they?
i m really interested.
lmk thank you and GLWS for the rest.
spacers are in good condition all the studs are fine. as far as the brand, i'm not sure. they are quality though.

[Kaifd3s]

Free bump, the thread title made me giggle...

[jeremy242]

pm sent about down pipe

[bradystrib]

someone has to need some of this stuff. bump.

[ka-turbo]

bought the fuel pump...LEGIT seller and i dont say that to for just anybody ...you gotta earn your keep wit me....GLWS man and awesome pricing and response time for the sale and pump

[word sux]

pmd about ic no response

[ghost_silvia]

intercooler sold locally. sorry.
That's probably why. PMD you

[Kasilvia88]

hi I am in need of a new t25. do you still have the turbo and what kind of condition is it in? i.e. any shaft play etc.

[S14_drift junkE]

hi I am in need of a new t25. do you still have the turbo and what kind of condition is it in? i.e. any shaft play etc.
really??? this shit is almost 4 months old...
bradystrib Last Activity: 09-18-2010 05:03 AM

[racerx2k1]

Last Activity: 09-17-2010 02:03 PM