SC_S13
07-13-2010, 03:15 AM
Hi People! Rule #1: NO BS. Rule #2: Buy my stuff plz :wavey:
Located in Norcal, Santa Cruz to be specific. Parts that will have the option of shipping will be indicated when pricing is addressed. I accept cash, cashier's checks, and paypal (please include 3%). Prices are somewhat firm, due to the fact that almost all these parts have never been used or have very little use, and by very little use, I mean mounted and taken off. All questions and offers will be gladly considered, so feel free to PM me with any inquiries. My last draft of this post was accidently refreshed, so I may not be as thorough this time around, but I insure it is not to hide anything!
I also have silvia front parts, including the coveted Aero bumper (with both grills :naughty:) that have not been pictured. This is because I would need a replacement pop up front. If there is enough interest, I will consider parting it out.
Anyways....
S13 Chuki Sideskirts - SOLD
Deets: Had these hand picked and sent from Japan. Structurally, they are perfect, save one top crack on the passenger side front. However, the crack is not located in the corners, so they have not been abused. The mounting holes are all clean. They could use a sand or probably a repaint, but they are very clean.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0017.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0018.jpg
COMPLETE Z32 TT Brake Conversion - $600 picked up / NO shipping unless you're willing to pay!
Deets: This set is from a 1993 TT. That means IRON front calipers. This isn't some half assed rusty set with no pads or hardware. I pieced this together, complete with EVERYTHING you need to slap on this beastly brake system. INCLUDES:
- Turned and resurfaced rotors, front and rear
- Loaded Iron front calipers with good pads
- Loaded Rear calipers with good pads
- BRAND NEW Agency Power front lines
- BRAND NEW SPL rear lines
- 2+2 Complete E-Brake setup with lines and shoes have been SOLD!
Throw in the front/rear 5-lug hubs for a $250 packaged deal! VVVV
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0019.jpg
Ichiba 5-lug front hubs w/ new OEM bearings - $250 picked up / $280 shipped
Deets: Barely used Ichiba hubs with BRAND NEW OEM bearings pressed in to eliminate the prone-to-fail Ichiba bearings (bearings cost over $130). These are good to go for a longgggg time without need replacement.
Z32 N/A 5-lug rear hubs - $90 picked up / $110 shipped
Deets - A little dusty but clean. These are the N/A versions so they bolt directly on. Internals are clean and spin freely.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0005.jpg
Battle Version Tension Rods - $130 picked up / $145 shipped
Deets: These are pretty much virgin. They have been mounted for sometime and taken off, but they are clean.
Tein Inner/Outer Tie Rods - SOLD
Deets: Like the Battle Version rods, these are pretty much virgin. New joints and clean boots. One of them have small chips on one end of the boot but its overall very clean.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0016.jpg
Powered by Max (PBM) Traction Rods - $170 picked up / $180 shipped PENDING
Deets: BRAND NEW PBM traction rods. Still have zipties on em. Save yourself the taxes and some shipping!
Z32 Brake Master Cylinder - $100 picked up / $115 shipped
Deets: Super clean, hardly used. Has 3rd fitting for plug n play.
JDM License plate mounts - $12 picked up / $16 shipped
Deets: Tilting individual mounts for a license plate. Can be mounted onto bumper. JDM tyte for added HP?? Can provide more pics upon request.
OEM S13 Window Visor - SOLD
Deets: Bought brand new, never mounted, still in wrapping and box. One of the last sets available from Courtesy Parts when they had them for sale last year.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0008.jpg
OEM Headlight/Signal Switch - $20 picked up / $25 Shipped
Deets: Super clean, no fading, no scratches. Missing a little bit of the white markings for the headlight indicators but mint otherwise.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0009.jpg
OEM Ignition key light ring - $12 picked up / $15 shipped
Deets: Clean set I bought from CrimsonRockett. Never used, still in his original envelope :-P
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0015.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0010.jpg
180sx Digital Climate Controll (DCC) - $135 picked up / $150 shipped
Deets: Bought from a former Zilvia member that claimed it to be complete. This setup however is missing 2 sensors/motors. Easy to find on EBay or request here, I've never taken the time to find them myself. Have found a couple posts on EBay though. The faceplate is clean and the harness comes pretty unmolested.
Works Wheel Nuts (20pc) w/ Locking - SOLD
Deets: Bought from BesTint in LA. If you know anything about him, it is that his parts, services, and overall person is of excellent quality. These Works nuts are high quality, but have the scratches that come with mounting and dismounting. They are still clean and have excellent threading. Get em' for CHEAP.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0022.jpg
Hyper-Flex Poly Bushing Kit (missing rear sway bushings) - $100 picked up / $110 shipped
Deets: Bought from Agency Power. Was missing rear sway bar mount bushings so I had them order me replacements. Never mounted any pieces besides the actual sway bar bushings to replace mine. Individual pieces are pretty cheap to replace.
ICEEEEE
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0023.jpg
Alpine iXA-w404 Double DIN w/ Imprint & Crossover - $435 picked up / $450 shipped
Deets: BRAND NEW. Courtesy of Broadfield comes with Alpine w404 Double DIN, specifically fitted for the 240sx. Retailed for over $500. It's built to be specifically compatible with the Iphone as well as the Ipod. Mine includes the optional Imprint/Crossover tuner which allows for custom sound settings to be saved for different hearing perspectives ($159 value). More here: Alpine PXA-H100 IMPRINT™ Audio Processor Tunes your Alpine receiver to your vehicle's acoustics at Crutchfield.com (http://www.crutchfield.com/p_500PXAH100/Alpine-PXA-H100-IMPRINT-Audio-Processor.html?tp=116)
Alpine PDX-5 Amp - $490 picked up / $510 shipped
Deets: Retails at $600. Amazing amp, small, keeps cool, and POWERFUL. has 5 channels: 4x75watts and 1x100watts. Test fitted only!
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0025.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0026.jpg
Complete Infinity Reference Speaker Set with MTX 12' Sub (not pictured) - $400
Pair 6x9 2-way, Pair 4' 2-way, Pair 6x1/2 2-way. Comes with wiring kit and includes 2 amps: Concord 2x100watts and Rockford Fosgate Punch 600.4
The speakers have seen limited use. the MTX sub is brand new, 400watts. Cheap Full Setup. Will include the speaker adapters for the 6x1/2's to be used up front.
MISC
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0034.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0030.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0033.jpg
VVVNDS Nike Dunk SB Dinosaur Jr. (sz 10) - $220 picked up / $240 shipped
Deets: Bought on N-SB.org a longggg time ago (before they changed their url lol) It's been worn three times, once outside. 99% stars. Ask all you want about authenticity but the pictures speak for them selves. Fakes can go die :barfkiss: I'm sad to sell my grails. FIRM on price.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0038.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0039.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0040.jpg
DS Nike Dunk SB Peewee Hermans (sz 10) - $180 picked up / $200 shipped
Deets: Purchased from FlightLA in 07. BRAND NEW, has tags, lace bag still attached. NEVER even tried on...
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0046.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0045.jpg
GG UMP Airsoft Gun - $130 picked up / $150 shipped
Deets: GG fully automatic electric airsoft gun. Tough metal component motor and firing mechanism. Comes with extra clip. Only used high grade and weigh competition BBs (and not that shit you buy at Outdoors World or Big 5...) Fired relatively few times, one of my impulse buys...The bullet slide has come unattached from its spring, but can be reattached professionally or by yourself. I haven't dedicated the time to taking it apart. GG is a top airsoft company, high quality parts and very expensive. This gun retails at $300.
Located in Norcal, Santa Cruz to be specific. Parts that will have the option of shipping will be indicated when pricing is addressed. I accept cash, cashier's checks, and paypal (please include 3%). Prices are somewhat firm, due to the fact that almost all these parts have never been used or have very little use, and by very little use, I mean mounted and taken off. All questions and offers will be gladly considered, so feel free to PM me with any inquiries. My last draft of this post was accidently refreshed, so I may not be as thorough this time around, but I insure it is not to hide anything!
I also have silvia front parts, including the coveted Aero bumper (with both grills :naughty:) that have not been pictured. This is because I would need a replacement pop up front. If there is enough interest, I will consider parting it out.
Anyways....
S13 Chuki Sideskirts - SOLD
Deets: Had these hand picked and sent from Japan. Structurally, they are perfect, save one top crack on the passenger side front. However, the crack is not located in the corners, so they have not been abused. The mounting holes are all clean. They could use a sand or probably a repaint, but they are very clean.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0017.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0018.jpg
COMPLETE Z32 TT Brake Conversion - $600 picked up / NO shipping unless you're willing to pay!
Deets: This set is from a 1993 TT. That means IRON front calipers. This isn't some half assed rusty set with no pads or hardware. I pieced this together, complete with EVERYTHING you need to slap on this beastly brake system. INCLUDES:
- Turned and resurfaced rotors, front and rear
- Loaded Iron front calipers with good pads
- Loaded Rear calipers with good pads
- BRAND NEW Agency Power front lines
- BRAND NEW SPL rear lines
- 2+2 Complete E-Brake setup with lines and shoes have been SOLD!
Throw in the front/rear 5-lug hubs for a $250 packaged deal! VVVV
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0019.jpg
Ichiba 5-lug front hubs w/ new OEM bearings - $250 picked up / $280 shipped
Deets: Barely used Ichiba hubs with BRAND NEW OEM bearings pressed in to eliminate the prone-to-fail Ichiba bearings (bearings cost over $130). These are good to go for a longgggg time without need replacement.
Z32 N/A 5-lug rear hubs - $90 picked up / $110 shipped
Deets - A little dusty but clean. These are the N/A versions so they bolt directly on. Internals are clean and spin freely.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0005.jpg
Battle Version Tension Rods - $130 picked up / $145 shipped
Deets: These are pretty much virgin. They have been mounted for sometime and taken off, but they are clean.
Tein Inner/Outer Tie Rods - SOLD
Deets: Like the Battle Version rods, these are pretty much virgin. New joints and clean boots. One of them have small chips on one end of the boot but its overall very clean.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0016.jpg
Powered by Max (PBM) Traction Rods - $170 picked up / $180 shipped PENDING
Deets: BRAND NEW PBM traction rods. Still have zipties on em. Save yourself the taxes and some shipping!
Z32 Brake Master Cylinder - $100 picked up / $115 shipped
Deets: Super clean, hardly used. Has 3rd fitting for plug n play.
JDM License plate mounts - $12 picked up / $16 shipped
Deets: Tilting individual mounts for a license plate. Can be mounted onto bumper. JDM tyte for added HP?? Can provide more pics upon request.
OEM S13 Window Visor - SOLD
Deets: Bought brand new, never mounted, still in wrapping and box. One of the last sets available from Courtesy Parts when they had them for sale last year.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0008.jpg
OEM Headlight/Signal Switch - $20 picked up / $25 Shipped
Deets: Super clean, no fading, no scratches. Missing a little bit of the white markings for the headlight indicators but mint otherwise.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0009.jpg
OEM Ignition key light ring - $12 picked up / $15 shipped
Deets: Clean set I bought from CrimsonRockett. Never used, still in his original envelope :-P
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0015.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0010.jpg
180sx Digital Climate Controll (DCC) - $135 picked up / $150 shipped
Deets: Bought from a former Zilvia member that claimed it to be complete. This setup however is missing 2 sensors/motors. Easy to find on EBay or request here, I've never taken the time to find them myself. Have found a couple posts on EBay though. The faceplate is clean and the harness comes pretty unmolested.
Works Wheel Nuts (20pc) w/ Locking - SOLD
Deets: Bought from BesTint in LA. If you know anything about him, it is that his parts, services, and overall person is of excellent quality. These Works nuts are high quality, but have the scratches that come with mounting and dismounting. They are still clean and have excellent threading. Get em' for CHEAP.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0022.jpg
Hyper-Flex Poly Bushing Kit (missing rear sway bushings) - $100 picked up / $110 shipped
Deets: Bought from Agency Power. Was missing rear sway bar mount bushings so I had them order me replacements. Never mounted any pieces besides the actual sway bar bushings to replace mine. Individual pieces are pretty cheap to replace.
ICEEEEE
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0023.jpg
Alpine iXA-w404 Double DIN w/ Imprint & Crossover - $435 picked up / $450 shipped
Deets: BRAND NEW. Courtesy of Broadfield comes with Alpine w404 Double DIN, specifically fitted for the 240sx. Retailed for over $500. It's built to be specifically compatible with the Iphone as well as the Ipod. Mine includes the optional Imprint/Crossover tuner which allows for custom sound settings to be saved for different hearing perspectives ($159 value). More here: Alpine PXA-H100 IMPRINT™ Audio Processor Tunes your Alpine receiver to your vehicle's acoustics at Crutchfield.com (http://www.crutchfield.com/p_500PXAH100/Alpine-PXA-H100-IMPRINT-Audio-Processor.html?tp=116)
Alpine PDX-5 Amp - $490 picked up / $510 shipped
Deets: Retails at $600. Amazing amp, small, keeps cool, and POWERFUL. has 5 channels: 4x75watts and 1x100watts. Test fitted only!
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0025.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0026.jpg
Complete Infinity Reference Speaker Set with MTX 12' Sub (not pictured) - $400
Pair 6x9 2-way, Pair 4' 2-way, Pair 6x1/2 2-way. Comes with wiring kit and includes 2 amps: Concord 2x100watts and Rockford Fosgate Punch 600.4
The speakers have seen limited use. the MTX sub is brand new, 400watts. Cheap Full Setup. Will include the speaker adapters for the 6x1/2's to be used up front.
MISC
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0034.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0030.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0033.jpg
VVVNDS Nike Dunk SB Dinosaur Jr. (sz 10) - $220 picked up / $240 shipped
Deets: Bought on N-SB.org a longggg time ago (before they changed their url lol) It's been worn three times, once outside. 99% stars. Ask all you want about authenticity but the pictures speak for them selves. Fakes can go die :barfkiss: I'm sad to sell my grails. FIRM on price.
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0038.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0039.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0040.jpg
DS Nike Dunk SB Peewee Hermans (sz 10) - $180 picked up / $200 shipped
Deets: Purchased from FlightLA in 07. BRAND NEW, has tags, lace bag still attached. NEVER even tried on...
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0046.jpg
http://i20.photobucket.com/albums/b248/syrusstephens/Car%20Parts/DSC_0045.jpg
GG UMP Airsoft Gun - $130 picked up / $150 shipped
Deets: GG fully automatic electric airsoft gun. Tough metal component motor and firing mechanism. Comes with extra clip. Only used high grade and weigh competition BBs (and not that shit you buy at Outdoors World or Big 5...) Fired relatively few times, one of my impulse buys...The bullet slide has come unattached from its spring, but can be reattached professionally or by yourself. I haven't dedicated the time to taking it apart. GG is a top airsoft company, high quality parts and very expensive. This gun retails at $300.