S14 To G35 Brembo Conversion Question

[DeeJay1337]

So I picked up a set of Brembo's from a G35... So i'll do a nice write up on this but I still have a few questions.

Everything is bolt on from what I figured out. But here's my question...

S14 Stainless Steel lines would work right? or Z32 Conversion Brake lines?

Second... For the rear e Brake... If I got the Rear R32 Ebrake Conversion lines, would they work with the brembo's?

[DeeJay1337]

No one can help me on this?

[projectRDM]

So I picked up a set of Brembo's from a G35... So i'll do a nice write up on this but I still have a few questions.

Everything is bolt on from what I figured out. But here's my question...

S14 Stainless Steel lines would work right? or Z32 Conversion Brake lines?

Second... For the rear e Brake... If I got the Rear R32 Ebrake Conversion lines, would they work with the brembo's?

Only the fronts bolt on, and only after you drill the spindle holes to 14mm.

Z32 lines must be used, with the IF fitting. A banjo fitting won't affix to the caliper.

[iLagX]

Only the fronts bolt on, and only after you drill the spindle holes to 14mm.

Z32 lines must be used, with the IF fitting. A banjo fitting won't affix to the caliper.

WHAT HE SAID!!
MAKE SURE YOU HAVE THE 14mm BOLT THAT CAME WITH THE CALIPER AND CUT OF YOUR BRAKE DUST SHIELD>!

[DeeJay1337]

Ok, but I also have the rears that I wnt to use. Do I need different rotors? with teh R32 Ebrake cables?

[DeeJay1337]

Any help on this?

[DeeJay1337]

I still need some help on this, to see what I can do to make my Rear G35 Brembo's work. Im trying to see if it can get an STI Rotor will that work with my ebrake?