ksport kontrol height adjustment.

[skyline_fo_life]

im pretty new to forums so here it goes. i bought a set of used ksport coilovers for my 92' 240sx hatch with about 5000 miles on em. they were pretty jammed up but i managed to bust em loose with no problems. i adjusted the height but i want to go lower. the back has room to go lower but im having a problem with the front because the springs are tight and i cant get the perch to move up any further. i tried a spring compressor and i got the perch to move about another inch. is their any other method to compress springs and slam it some more.


92' 240sx hatch, stock ka, bbp header, msd blaster II ign coil, 3in n1 style exhaust w/ test pipe, stripped trunk, ksport kontrol coils, 17x8 te37 knockoffs. more to come!!

[Ksport USA]

Instructions for our coilovers can be found here:
http://ksportusa.com/edocs/Coilover%20Instructions.pdf

Do not adjust height via the spring perch. Our coilovers use an adjustable lower mount. Please read the instructions I provided.

Thanks,
Matt C.
Ksport Suspension Company
[email protected]
Phone: 480-829-8100
Fax: 480-829-8103
Ksport USA (KsportUSA) on Twitter (http://www.twitter.com/ksportusa)
KSport USA | Facebook (http://www.facebook.com/pages/KSport-USA/116705032377)#
Ksport USA (http://ksportusa.com/blog/)

[seRu13]

if you want to go lower remove one of the locking collars and install the lower mount upside down. as long as everything it tightened good it will work great and the car will be slammed :thumbsup:

[skyline_fo_life]

thanks guys your advice helped out.