CamryOnBronze
07-09-2010, 07:21 AM
Alright, I am hoping to clean up my garage and make some final purchases to get my car back on the road! I have the following items for sale:
OEM SR20DET:
1. Stock Flywheel: OEM flywheel for SR20DET. Probably has about 50k on it. Surface is in good condition, no issues whatsoever.
$75 Shipped
2. Stock Oil Pump: Same mileage as above. No known issues at all. A new front seal will need to be installed with this pump. The front of it is dirty, but it came off of a running engine (my car.)
$65 Shipped
3. Stock IACV: Also came off of my car. My GReddy intake manifold came with one, so that is why I have a spare. Works well.
$40 Shipped
4. Stock Coolant Overflow: Not the prettiest, but does not leak to the best of my knowledge.
$25 Shipped
5. Stock Turbo Pipe: Stock intake outlet turbo elbow for the stock T25 turbo. I believe it includes a gently used gasket.
$20 Shipped
6. SR20DET E6 ECU: Blacktop E6 ECU for SR20DET. This was in my car last summer, no issues at all whatsoever.
$110 Shipped
7. Kouki 180SX Position Lamps: Brand new OEM kouki 180SX position lamps. These do not included the bulb sockets. Ordered new through NissanParts.cc, paid over $75 for them. New and unused, in boxes.
SOLD
Aftermarket:
1. S13 SR20DET Intercooler Piping: I have two pieces of intercooler piping for a S13 SR setup- the cold pipe for a stock intake manifold, and the lower hot pipe portion.
$35 Shipped each
$60 Shipped for both
2. GReddy Aluminum Pulley Set: GReddy pulley kit for S13 SR20DET. I purchased these brand new, but damaged the power steering pulley during the installation of my engine. It has a 3/4" scuff on it and is slightly bent. A machine shop should be able to straighten it out. There are no issues with the other two pulleys at all whatsoever. This kit is over $350 new!!
SOLD
3. Tein Strut Tower Braces: Front and rear Tein strut tower braces for S13. I am hoping to purchase a Next X Brace, so these need to go. The Tein badges must have fallen off before I owned these, but you can tell by the "L &R" stamping and the quality of the welds that these are genuine Tein pieces.
$230 Shipped for both
Pictures of Items:
http://img121.imageshack.us/img121/3296/cimg1027s.jpg
http://img338.imageshack.us/img338/2571/cimg1028y.jpg
http://img121.imageshack.us/img121/2806/cimg1029r.jpg
http://img689.imageshack.us/img689/6333/cimg1030d.jpg
http://img84.imageshack.us/img84/9348/cimg1031.jpg
http://img718.imageshack.us/img718/5186/cimg1032j.jpg
http://img443.imageshack.us/img443/2259/cimg1036b.jpg
http://img682.imageshack.us/img682/885/cimg1037.jpg
As posted, prices include shipping. I will take offers on some of these items, but prices are pretty firm- I think that what I am asking for all of this stuff is pretty reasonable. All items will be purchased through PayPal and shipped out via UPS. A tracking number will be sent to the buyer immediately after items have shipped. Please see my iTrader feedback and PM me with questions, concerns, or for payment info. Thanks!
Damon
OEM SR20DET:
1. Stock Flywheel: OEM flywheel for SR20DET. Probably has about 50k on it. Surface is in good condition, no issues whatsoever.
$75 Shipped
2. Stock Oil Pump: Same mileage as above. No known issues at all. A new front seal will need to be installed with this pump. The front of it is dirty, but it came off of a running engine (my car.)
$65 Shipped
3. Stock IACV: Also came off of my car. My GReddy intake manifold came with one, so that is why I have a spare. Works well.
$40 Shipped
4. Stock Coolant Overflow: Not the prettiest, but does not leak to the best of my knowledge.
$25 Shipped
5. Stock Turbo Pipe: Stock intake outlet turbo elbow for the stock T25 turbo. I believe it includes a gently used gasket.
$20 Shipped
6. SR20DET E6 ECU: Blacktop E6 ECU for SR20DET. This was in my car last summer, no issues at all whatsoever.
$110 Shipped
7. Kouki 180SX Position Lamps: Brand new OEM kouki 180SX position lamps. These do not included the bulb sockets. Ordered new through NissanParts.cc, paid over $75 for them. New and unused, in boxes.
SOLD
Aftermarket:
1. S13 SR20DET Intercooler Piping: I have two pieces of intercooler piping for a S13 SR setup- the cold pipe for a stock intake manifold, and the lower hot pipe portion.
$35 Shipped each
$60 Shipped for both
2. GReddy Aluminum Pulley Set: GReddy pulley kit for S13 SR20DET. I purchased these brand new, but damaged the power steering pulley during the installation of my engine. It has a 3/4" scuff on it and is slightly bent. A machine shop should be able to straighten it out. There are no issues with the other two pulleys at all whatsoever. This kit is over $350 new!!
SOLD
3. Tein Strut Tower Braces: Front and rear Tein strut tower braces for S13. I am hoping to purchase a Next X Brace, so these need to go. The Tein badges must have fallen off before I owned these, but you can tell by the "L &R" stamping and the quality of the welds that these are genuine Tein pieces.
$230 Shipped for both
Pictures of Items:
http://img121.imageshack.us/img121/3296/cimg1027s.jpg
http://img338.imageshack.us/img338/2571/cimg1028y.jpg
http://img121.imageshack.us/img121/2806/cimg1029r.jpg
http://img689.imageshack.us/img689/6333/cimg1030d.jpg
http://img84.imageshack.us/img84/9348/cimg1031.jpg
http://img718.imageshack.us/img718/5186/cimg1032j.jpg
http://img443.imageshack.us/img443/2259/cimg1036b.jpg
http://img682.imageshack.us/img682/885/cimg1037.jpg
As posted, prices include shipping. I will take offers on some of these items, but prices are pretty firm- I think that what I am asking for all of this stuff is pretty reasonable. All items will be purchased through PayPal and shipped out via UPS. A tracking number will be sent to the buyer immediately after items have shipped. Please see my iTrader feedback and PM me with questions, concerns, or for payment info. Thanks!
Damon